From Stm32World
Revision as of 04:35, 20 February 2022 by Lth (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This page contains notes on porting LVGL to STM32 using a ST7789 display.


Displays with the ST7789 comes in many different variants, but in essence they all use a single direction SPI connection (MOSI only). On some variants the CS (Chip Select) line is permanently pulled low, but on the one I am using here, the CS line is wired.

ST7789 Pins.png

Miscellaneous Links