Difference between revisions of "Boot0"
Jump to navigation
Jump to search
| Line 7: | Line 7: | ||
If the pin is left unconnected in a [[:Category:STM32 Hardware|hardware]] design it will "probably work", but it "might" on occasion detect a "high" on the pin and therefore decide to switch to the internal bootloader. | If the pin is left unconnected in a [[:Category:STM32 Hardware|hardware]] design it will "probably work", but it "might" on occasion detect a "high" on the pin and therefore decide to switch to the internal bootloader. | ||
| + | |||
| + | [[File:Reset and Boot0.png|600px]] | ||
Revision as of 03:45, 26 August 2021
All STM32 MCUs includes a GPIO pin labelled Boot0. This pin is used to select the boot mode
Hardware design
It is extremely important to pull the Boot0 pin low during reset for normal operation.
If the pin is left unconnected in a hardware design it will "probably work", but it "might" on occasion detect a "high" on the pin and therefore decide to switch to the internal bootloader.
