STM32 LED Pulse

Imagine you had the requirement to turn on a LED for a specific length of time at the press of a button.

Obviously, responding to a button press could be easily handled by an external interrupt, so one could come up with something like:

void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) {
    if (GPIO_Pin == BTN_Pin) // If the button
    {

        HAL_GPIO_WritePin(LED_GPIO_Port, LED_Pin, GPIO_PIN_RESET); // Switch LED ON
        HAL_Delay(500); // Wait 500 ms
        HAL_GPIO_WritePin(LED_GPIO_Port, LED_Pin, GPIO_PIN_SET); // Switch LED OFF

    }
}

It should be equally obvious why this is a really piss poor idea. The function will block for half a second, leaving the processor unable to do anything else for that period.

A much better idea.