Colibri Pt1000

From Stm32World Wiki

Revision as of 10:47, 13 June 2023 by Niclas (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Colibri pt1000-RevA-front3d.png

Colibri pt1000-RevA-back3d.png

Colibri PID is an expansion module with two Pt1000 temperature sensor inputs.

MAX31865 is the resistor Whetstone bridge A/D converter. It uses SPI instead of I2C.

I2C Addresses

 24LC16    = 0x50-0x57

SPI info

See Colibri-3 for information on how to activate SPI on the carrier board.

Activate (low) CS1 for communication with input 1.
Activate (low) CS0 for communication with input 2.

Documentation

Retrieved from "https://stm32world.com/w/index.php?title=Colibri_Pt1000&oldid=3682"

Colibri