Serial Wire Debug

From Stm32World Wiki
Revision as of 02:33, 16 March 2022 by Lth (talk | contribs)
Jump to navigation Jump to search
A bunch of ST-Link Clones. These usually cost less than $2

SWD is a ARM specific 2-wire version of JTAG. It enables developers to manipulate the built-in flash (flash new firmware), to debug firmware and to monitor memory locations (variables), live, while the firmware is running.

Here is an example of a Chinese clone ST-Link hooked up to one of our Green Pill boards:

ST-Link Greenpill connection.jpg

As can be seen on the photo, the GND and the 3.3V supply lines are also hooked up.

Retrieved from "https://stm32world.com/w/index.php?title=Serial_Wire_Debug&oldid=2432"