Difference between revisions of "Demiurge Sound Processing Engine"

Revision as of 07:21, 20 August 2022

The Demiurge Sound Processing Engine is a sound processing platform. It is designed as processing blocks that are wired together once (typically at boot) and then handles the update cycle (no buffering) automatically and without jitter.

@@ Line 1: / Line 1: @@
 The Demiurge Sound Processing Engine is a sound processing platform. It is designed as processing blocks that are wired together once (typically at boot) and then handles the update cycle (no buffering) automatically and without jitter.
-‎<syntaxhighlight lang="C">
-/*
-  Copyright 2019, Awesome Audio Apparatus.
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-      https://www.apache.org/licenses/LICENSE-2.0
-Unless required by applicable law or agreed to in writing, software
-distributed under the License is distributed on an "AS IS" BASIS,
-WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-See the License for the specific language governing permissions and
-      limitations under the License.
-*/
-#include "demiurge.h"
-static control_pair_t pair1;  // frequency
-static control_pair_t pair2;  // amplitude
-static control_pair_t pair3;  // frequency
-static control_pair_t pair4;  // amplitude
-static audio_outport_t out1;
-static audio_outport_t out2;
-static oscillator_t oscillator1;
-static oscillator_t oscillator2;
-/* Simple 2 VCO. SAW on output 1 and SQUARE on output 2. */
-void vco_prepare() {
-    demiurge_samplerate = 48000;      // 48000 samples/second
-    demiurge_set_inport_cv(1);
-    demiurge_set_inport_cv(2);
-    demiurge_set_inport_cv(3);
-    demiurge_set_inport_cv(4);
-    demiurge_set_outport_audio(1);
-    demiurge_set_outport_audio(2);
-}
-void vco_setup() {
-    // Initialize the hardware configuration
-    control_pair_init(&pair1, 1);     // FREQUENCY = CV+Pot at the top
-    control_pair_init(&pair2, 2);     // AMPLITUDE = CV+Pot at the second position from the top
-    control_pair_init(&pair3, 3);     // FREQUENCY = CV+Pot at the third position from top
-    control_pair_init(&pair4, 4);     // AMPLITUDE = CV+Pot at the bottom
-    audio_outport_init(&out1, 1);     // Audio Out on left output channel
-    audio_outport_init(&out2, 2);     // Audio Out on right output channel
-    // Initialize the oscillators
-    oscillator_init(&oscillator1);
-    oscillator_init(&oscillator2);
-    // Set up the oscillators to SINE wave form
-    oscillator_configure_mode(&oscillator1, SAW);
-    oscillator_configure_mode(&oscillator2, SQUARE);
-    oscillator_configure_frequency(&oscillator1, &pair1.me);
-    oscillator_configure_frequency(&oscillator2, &pair3.me);
-    oscillator_configure_amplitude(&oscillator1, &pair2.me);
-    oscillator_configure_amplitude(&oscillator2, &pair4.me);
-    // Connect Oscillator to outputs
-    audio_outport_configure_input(&out1, &oscillator1.me);
-    audio_outport_configure_input(&out2, &oscillator2.me);
-}
-void vco_loop() {
-   // handle buttons and LEDs
-}
-#undef TAG
-‎</syntaxhighlight>

Difference between revisions of "Demiurge Sound Processing Engine"

Revision as of 07:21, 20 August 2022

Navigation menu

Search