Difference between revisions of "ST-Link"

Revision as of 05:09, 27 November 2020

There's a number of different ways to flash STM32 devices. One of these is to use ST's own ST-Link devices.

There are multiple benefits of using one of these ST-Link devices rather than a plain serial dongle:

The official ST-Link as seen above are relatively cheap (< $20) and there are Chinese copies available (haven't tried those).

The most common option are these:

They are Chinese knock offs and they run the official ST-Link firmware.

@@ Line 1: / Line 1: @@
-[[Category:STM32]] [[Category:STLink]]
+[[Category:STM32]] [[Category:ST-Link]]
-There's a number of different ways to flash [[STM32]] devices.  One of these is to use [[ST]]'s own [[STLink]] devices.
+There's a number of different ways to flash [[STM32]] devices.  One of these is to use [[ST]]'s own [[ST-Link]] devices.
 [[File:STLink.jpg|400px]]
-There are multiple benefits of using one of these [[STLink]] devices rather than a plain serial dongle:
+There are multiple benefits of using one of these [[ST-Link]] devices rather than a plain serial dongle:
 # The device need not be restarted in flash mode ([[Boot0]])
 # Programs can be debugged on the device
-The official [[STLink]] as seen above are relatively cheap (< $20) and there are Chinese copies available (haven't tried those).
+The official [[ST-Link]] as seen above are relatively cheap (< $20) and there are Chinese copies available (haven't tried those).
 The most common option are these:
@@ Line 16: / Line 16: @@
 [[File:STLink-v2 (Chinese knock off).jpg|400px]]
-They are Chinese knock offs and they run the official [[STLink]] firmware.
+They are Chinese knock offs and they run the official [[ST-Link]] firmware.