Difference between revisions of "STM32 WS2812 (NeoPixel RGB LED)"
Jump to navigation
Jump to search
| Line 2: | Line 2: | ||
[[File:STM32Dev WS2812B RGB LED.jpg|thumb]] | [[File:STM32Dev WS2812B RGB LED.jpg|thumb]] | ||
When developing the [[STM32Dev]] board a [[WS2812B]] RGB [[LED]] was including connected to the PC6 [[GPIO]]. | When developing the [[STM32Dev]] board a [[WS2812B]] RGB [[LED]] was including connected to the PC6 [[GPIO]]. | ||
| + | |||
| + | The [[WS2812B]] LED contains 3 LEDS: red, green and blue and each of these LEDS can be set at 256 different brightness levels. These levels are controlled with a bit stream running at 800 kHz and multiple LEDS (up to 1000-ish) can be chained after each other. | ||
| + | |||
| + | |||
== Library on Github == | == Library on Github == | ||
Revision as of 17:46, 26 November 2020
When developing the STM32Dev board a WS2812B RGB LED was including connected to the PC6 GPIO.
The WS2812B LED contains 3 LEDS: red, green and blue and each of these LEDS can be set at 256 different brightness levels. These levels are controlled with a bit stream running at 800 kHz and multiple LEDS (up to 1000-ish) can be chained after each other.
Library on Github
The library is available on Github: