Difference between revisions of "ST-Link"

Revision as of 02:04, 31 October 2020

There's a number of different ways to flash STM32 devices. One of these is to use ST's own STLink devices.

There are multiple benefits of using one of these STLink devices rather than a plain serial dongle:

The official STLink as seen above are relatively cheap (< $20) and there are Chinese copies available (haven't tried those).

The most common option are these:

They are Chinese knock offs and they run the official STLink firmware.

@@ Line 1: / Line 1: @@
 There's a number of different ways to flash [[STM32]] devices.  One of these is to use [[ST]]'s own [[STLink]] devices.
+[[File:STLink.jpg|400px]]
+There are multiple benefits of using one of these [[STLink]] devices rather than a plain serial dongle:
+# The device need not be restarted in flash mode ([[Boot0]])
+# Programs can be debugged on the device
+The official [[STLink]] as seen above are relatively cheap (< $20) and there are Chinese copies available (haven't tried those).
+The most common option are these:
 [[File:STLink-v2 (Chinese knock off).jpg|400px]]
+They are Chinese knock offs and they run the official [[STLink]] firmware.