Difference between revisions of "Colibri Dev"
Jump to navigation
Jump to search
(Created page with " Colibri Dev is a board to do experiments with the Colibri I/O system, or to simply make one-off expansion boards that may be needed for a single project.") |
|||
| (8 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | [[Category:Colibri]]{{metadesc|Colibri Dev module}} | ||
| + | [[File:Colibri dev-1.jpg|180px|thumb]][[File:Colibri dev-2.jpg|180px|thumb]] | ||
| − | Colibri Dev is a board | + | Colibri Dev is a prototyping board for the Colibri system, when simple test are needed before making proper PCBs or when a simple one-off is all that is needed. |
| + | |||
| + | It has power and GND rails, plus plenty of pads on both sides with some pads having vias between the front and back layer. | ||
| + | |||
| + | There are footprints wired to I2C for; | ||
| + | * MCP4725 - 12bit D/A converter | ||
| + | * PCA9557 - 8bit I/O expander | ||
| + | * ADS1115IDGS - 16 bit A/D converter | ||
| + | * 24LC16 - Eeprom | ||
| + | |||
| + | |||
| + | All the colibri pins from the M.2 connector are available on extra large pads; | ||
| + | * I2C - SDA, SCL | ||
| + | * SPI - MOSI, MISO, SCLK, CS1, CS2, CS3 | ||
| + | * USB | ||
| + | * Programming/Debug - SWDIO, SWCLK | ||
| + | * Power - 3.3V, 5V, 12V and Vin (anything from 6-60VDC or 7-36VAC) | ||
| + | * Screw Terminals - a, b, c, d | ||
| + | * Misc - RESET, LED1 | ||
| + | |||
| + | == Documentation == | ||
| + | * [[:File:colibri_dev-RevA-schematics.pdf]] | ||
| + | * [[:File:colibri_dev-RevA-pcb.pdf]] | ||
Latest revision as of 07:57, 15 June 2023
Colibri Dev is a prototyping board for the Colibri system, when simple test are needed before making proper PCBs or when a simple one-off is all that is needed.
It has power and GND rails, plus plenty of pads on both sides with some pads having vias between the front and back layer.
There are footprints wired to I2C for;
- MCP4725 - 12bit D/A converter
- PCA9557 - 8bit I/O expander
- ADS1115IDGS - 16 bit A/D converter
- 24LC16 - Eeprom
All the colibri pins from the M.2 connector are available on extra large pads;
- I2C - SDA, SCL
- SPI - MOSI, MISO, SCLK, CS1, CS2, CS3
- USB
- Programming/Debug - SWDIO, SWCLK
- Power - 3.3V, 5V, 12V and Vin (anything from 6-60VDC or 7-36VAC)
- Screw Terminals - a, b, c, d
- Misc - RESET, LED1