Difference between revisions of "CH32V307V-EVT-R1"

From Stm32World Wiki
Jump to navigation Jump to search
 
(42 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
[[Category:CH32]][[Category:Development Boards]][[Category:CH32V307]]{{metadesc|CH32V307V-EVT-R1 Evaluation Board}}
+
[[Category:CH32]][[Category:RISC-V]][[Category:Development Board]][[Category:CH32V307]]{{metadesc|CH32V307V-EVT-R1 Evaluation Board}}
−
The [[CH32V307V-EVT-R1]] is a [[Development Board]] for the [[CH32V307]] [[RISC-V]] [[MCU]].
+
[[File:CH32V307V-EVT-R1 Top View.jpg|200px|thumb|CH32V307V-EVT-R1 Top View]]
 +
 
 +
The [[CH32V307V-EVT-R1]] is a [[:Category:Development Board|development board]] for the [[CH32V307]] [[RISC-V]] [[MCU]]. This page contains my initial notes on how to work with this board and the [[CH32V307]] [[MCU]].  My initial experiments are also on Github here: [https://github.com/lbthomsen/CH32V307V-EVT-R1 https://github.com/lbthomsen/CH32V307V-EVT-R1].
 +
 
 +
If you got experience and/or questions in relation to this page, please feel free to post them on our [https://www.facebook.com/groups/stm32world Facebook Group].
 +
 
 +
As a development board, this one is clearly inspired by [[ST]]'s [[STM32_Beginner_-_Getting_started#ST_Nucleo|Nucleo]] boards as it includes an Arduino header as well as a built-in flash/debug tool (they call it [[WCH-Link]] also inspired by [[ST-Link]]).
 +
 
 +
I never really understood why they (both this one and [[ST]]) choose to include an Arduino header.  As far as I know, most - if not all - Arduino boards are running at 5V, which makes them possibly incompatible with the 3.3V used on boards such as this.
 +
 
 +
The [[CH32V307V-EVT-R1]] board itself is readily availble from [https://lcsc.com/product-detail/Development-Boards-Kits_WCH-Jiangsu-Qin-Heng-CH32V307V-EVT-R1_C2943980.html LCSC] at around $12 (+ shipping - and you owe me a couple of freebies for the free advertising LCSC).
 +
 
 +
== Hardware Description ==
 +
 
 +
It is worth noticing that contrary to various [[ST]] development boards, the two user LED's and the user button are by default only wired to the header, not the MCU itself.  This means that a jumper lead is necessary to use any of these.
 +
 
 +
== MounRiver Studio ==
 +
 
 +
=== Installing ===
 +
 
 +
The MounRiver Studio community edition can be downloaded from [http://www.mounriver.com/download http://www.mounriver.com/download] (warning, insecure link).
 +
 
 +
Installing it (on Linux) is really quite simple.  Unpack the downloaded archive:
 +
 
 +
<pre>
 +
lth@ncpws04:~$ tar xvf Downloads/MounRiver_Studio_Community_Linux_x64_V110.tar.xz
 +
</pre>
 +
 
 +
After the archive has been unpacked a few tweaks are necessary.  MounRiver provided a script for this:
 +
 
 +
<pre>
 +
lth@ncpws04:~$ cd MounRiver_Studio_Community_Linux_x64_V110/beforeinstall/
 +
lth@ncpws04:~/MounRiver_Studio_Community_Linux_x64_V110/beforeinstall$ ./start.sh
 +
</pre>
 +
 
 +
And that is about it.  You can now run MounRiver Studio like this:
 +
 
 +
<pre>
 +
lth@ncpws04:~$ ~/MounRiver_Studio_Community_Linux_x64_V110/MRS_Community/MounRiver\ Studio_Community
 +
</pre>
 +
 
 +
=== Creating first project ===
 +
 
 +
Once the MounRiver Studio has been started, a new project can be created:
 +
 
 +
[[File:File - New project.png|400px]]
 +
 
 +
In the resulting dialog, first select the appropriate [[MCU]], then give the project a name:
 +
 
 +
[[File:Create project.png|400px]]
 +
 
 +
Notice that there is a bug which change the project name once a [[MCU]] is selected, so unless you want all your projects to be named after the [[MCU]], do change the name after you select the [[MCU]].
 +
 
 +
Pressing Ok will generate a source tree, including a main.c in the User directory:
 +
 
 +
<pre>
 +
/********************************** (C) COPYRIGHT *******************************
 +
* File Name          : main.c
 +
* Author            : WCH
 +
* Version            : V1.0.0
 +
* Date              : 2021/06/06
 +
* Description        : Main program body.
 +
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
 +
* SPDX-License-Identifier: Apache-2.0
 +
*******************************************************************************/
 +
 
 +
/*
 +
*@Note
 +
串口打印调试例程：
 +
USART1_Tx(PA9)。
 +
本例程演示使用 USART1(PA9) 作打印调试口输出。
 +
 
 +
*/
 +
 
 +
#include "debug.h"
 +
 
 +
 
 +
/* Global typedef */
 +
 
 +
/* Global define */
 +
 
 +
/* Global Variable */
 +
 
 +
 
 +
/*********************************************************************
 +
* @fn      main
 +
*
 +
* @brief  Main program.
 +
*
 +
* @return  none
 +
*/
 +
int main(void)
 +
{
 +
NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2);
 +
Delay_Init();
 +
USART_Printf_Init(115200);
 +
printf("SystemClk:%d\r\n",SystemCoreClock);
 +
 
 +
printf("This is printf example\r\n");
 +
 
 +
while(1)
 +
    {
 +
 
 +
}
 +
}
 +
 
 +
</pre>
 +
 
 +
As can be seen, the default application will print out a few statements and then do nothing.
 +
 
 +
By selecting Project/Build Project
 +
 
 +
[[File:Project-Build.png|200px]]
 +
 
 +
The project should be successfully build.  The Console window will show the result of the build process:
 +
 
 +
<pre>
 +
11:14:20 **** Build of configuration obj for project first ****
 +
make -j4 all
 +
Building file: ../User/ch32v30x_it.c
 +
Building file: ../User/main.c
 +
Building file: ../User/system_ch32v30x.c
 +
Invoking: GNU RISC-V Cross C Compiler
 +
riscv-none-embed-gcc -march=rv32imac -mabi=ilp32 -msmall-data-limit=8 -mno-save-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wunused -Wuninitialized  -g -I"/home/lth/src/CH32V307V-EVT-R1/first/Debug" -I"/home/lth/src/CH32V307V-EVT-R1/first/Core" -I"/home/lth/src/CH32V307V-EVT-R1/first/User" -I"/home/lth/src/CH32V307V-EVT-R1/first/Peripheral/inc" -std=gnu99 -MMD -MP -MF"User/ch32v30x_it.d" -MT"User/ch32v30x_it.o" -c -o "User/ch32v30x_it.o" "../User/ch32v30x_it.c"
 +
Invoking: GNU RISC-V Cross C Compiler
 +
riscv-none-embed-gcc -march=rv32imac -mabi=ilp32 -msmall-data-limit=8 -mno-save-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wunused -Wuninitialized  -g -I"/home/lth/src/CH32V307V-EVT-R1/first/Debug" -I"/home/lth/src/CH32V307V-EVT-R1/first/Core" -I"/home/lth/src/CH32V307V-EVT-R1/first/User" -I"/home/lth/src/CH32V307V-EVT-R1/first/Peripheral/inc" -std=gnu99 -MMD -MP -MF"User/system_ch32v30x.d" -MT"User/system_ch32v30x.o" -c -o "User/system_ch32v30x.o" "../User/system_ch32v30x.c"
 +
Invoking: GNU RISC-V Cross C Compiler
 +
Building file: ../Startup/startup_ch32v30x_D8C.S
 +
riscv-none-embed-gcc -march=rv32imac -mabi=ilp32 -msmall-data-limit=8 -mno-save-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wunused -Wuninitialized  -g -I"/home/lth/src/CH32V307V-EVT-R1/first/Debug" -I"/home/lth/src/CH32V307V-EVT-R1/first/Core" -I"/home/lth/src/CH32V307V-EVT-R1/first/User" -I"/home/lth/src/CH32V307V-EVT-R1/first/Peripheral/inc" -std=gnu99 -MMD -MP -MF"User/main.d" -MT"User/main.o" -c -o "User/main.o" "../User/main.c"
 +
Invoking: GNU RISC-V Cross Assembler
 +
riscv-none-embed-gcc -march=rv32imac -mabi=ilp32 -msmall-data-limit=8 -mno-save-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wunused -Wuninitialized  -g -x assembler -I"/home/lth/src/CH32V307V-EVT-R1/first/Startup" -MMD -MP -MF"Startup/startup_ch32v30x_D8C.d" -MT"Startup/startup_ch32v30x_D8C.o" -c -o "Startup/startup_ch32v30x_D8C.o" "../Startup/startup_ch32v30x_D8C.S"
 +
Finished building: ../Startup/startup_ch32v30x_D8C.S
 +
 +
Building file: ../Peripheral/src/ch32v30x_adc.c
 +
Invoking: GNU RISC-V Cross C Compiler
 +
riscv-none-embed-gcc -march=rv32imac -mabi=ilp32 -msmall-data-limit=8 -mno-save-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wunused -Wuninitialized  -g -I"/home/lth/src/CH32V307V-EVT-R1/first/Debug" -I"/home/lth/src/CH32V307V-EVT-R1/first/Core" -I"/home/lth/src/CH32V307V-EVT-R1/first/User" -I"/home/lth/src/CH32V307V-EVT-R1/first/Peripheral/inc" -std=gnu99 -MMD -MP -MF"Peripheral/src/ch32v30x_adc.d" -MT"Peripheral/src/ch32v30x_adc.o" -c -o "Peripheral/src/ch32v30x_adc.o" "../Peripheral/src/ch32v30x_adc.c"
 +
Finished building: ../User/main.c
 +
 
 +
(!!!repetitive stuff removed here!!!)
 +
 +
Invoking: GNU RISC-V Cross C Compiler
 +
riscv-none-embed-gcc -march=rv32imac -mabi=ilp32 -msmall-data-limit=8 -mno-save-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wunused -Wuninitialized  -g -I"/home/lth/src/CH32V307V-EVT-R1/first/Debug" -I"/home/lth/src/CH32V307V-EVT-R1/first/Core" -I"/home/lth/src/CH32V307V-EVT-R1/first/User" -I"/home/lth/src/CH32V307V-EVT-R1/first/Peripheral/inc" -std=gnu99 -MMD -MP -MF"Peripheral/src/ch32v30x_usart.d" -MT"Peripheral/src/ch32v30x_usart.o" -c -o "Peripheral/src/ch32v30x_usart.o" "../Peripheral/src/ch32v30x_usart.c"
 +
Building file: ../Peripheral/src/ch32v30x_wwdg.c
 +
Invoking: GNU RISC-V Cross C Compiler
 +
riscv-none-embed-gcc -march=rv32imac -mabi=ilp32 -msmall-data-limit=8 -mno-save-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wunused -Wuninitialized  -g -I"/home/lth/src/CH32V307V-EVT-R1/first/Debug" -I"/home/lth/src/CH32V307V-EVT-R1/first/Core" -I"/home/lth/src/CH32V307V-EVT-R1/first/User" -I"/home/lth/src/CH32V307V-EVT-R1/first/Peripheral/inc" -std=gnu99 -MMD -MP -MF"Peripheral/src/ch32v30x_wwdg.d" -MT"Peripheral/src/ch32v30x_wwdg.o" -c -o "Peripheral/src/ch32v30x_wwdg.o" "../Peripheral/src/ch32v30x_wwdg.c"
 +
Finished building: ../Peripheral/src/ch32v30x_rcc.c
 +
 +
Building file: ../Debug/debug.c
 +
Invoking: GNU RISC-V Cross C Compiler
 +
riscv-none-embed-gcc -march=rv32imac -mabi=ilp32 -msmall-data-limit=8 -mno-save-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wunused -Wuninitialized  -g -I"/home/lth/src/CH32V307V-EVT-R1/first/Debug" -I"/home/lth/src/CH32V307V-EVT-R1/first/Core" -I"/home/lth/src/CH32V307V-EVT-R1/first/User" -I"/home/lth/src/CH32V307V-EVT-R1/first/Peripheral/inc" -std=gnu99 -MMD -MP -MF"Debug/debug.d" -MT"Debug/debug.o" -c -o "Debug/debug.o" "../Debug/debug.c"
 +
Finished building: ../Peripheral/src/ch32v30x_wwdg.c
 +
 +
Building file: ../Core/core_riscv.c
 +
Invoking: GNU RISC-V Cross C Compiler
 +
riscv-none-embed-gcc -march=rv32imac -mabi=ilp32 -msmall-data-limit=8 -mno-save-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wunused -Wuninitialized  -g -I"/home/lth/src/CH32V307V-EVT-R1/first/Debug" -I"/home/lth/src/CH32V307V-EVT-R1/first/Core" -I"/home/lth/src/CH32V307V-EVT-R1/first/User" -I"/home/lth/src/CH32V307V-EVT-R1/first/Peripheral/inc" -std=gnu99 -MMD -MP -MF"Core/core_riscv.d" -MT"Core/core_riscv.o" -c -o "Core/core_riscv.o" "../Core/core_riscv.c"
 +
Finished building: ../Debug/debug.c
 +
 +
Finished building: ../Core/core_riscv.c
 +
 +
Finished building: ../Peripheral/src/ch32v30x_usart.c
 +
 +
Finished building: ../Peripheral/src/ch32v30x_tim.c
 +
 +
Building target: first.elf
 +
Invoking: GNU RISC-V Cross C Linker
 +
riscv-none-embed-gcc -march=rv32imac -mabi=ilp32 -msmall-data-limit=8 -mno-save-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wunused -Wuninitialized  -g -T "/home/lth/src/CH32V307V-EVT-R1/first/Ld/Link.ld" -nostartfiles -Xlinker --gc-sections -Wl,-Map,"first.map" --specs=nano.specs --specs=nosys.specs -o "first.elf" ./User/ch32v30x_it.o ./User/main.o ./User/system_ch32v30x.o  ./Startup/startup_ch32v30x_D8C.o  ./Peripheral/src/ch32v30x_adc.o ./Peripheral/src/ch32v30x_bkp.o ./Peripheral/src/ch32v30x_can.o ./Peripheral/src/ch32v30x_crc.o ./Peripheral/src/ch32v30x_dac.o ./Peripheral/src/ch32v30x_dbgmcu.o ./Peripheral/src/ch32v30x_dma.o ./Peripheral/src/ch32v30x_dvp.o ./Peripheral/src/ch32v30x_eth.o ./Peripheral/src/ch32v30x_exti.o ./Peripheral/src/ch32v30x_flash.o ./Peripheral/src/ch32v30x_fsmc.o ./Peripheral/src/ch32v30x_gpio.o ./Peripheral/src/ch32v30x_i2c.o ./Peripheral/src/ch32v30x_iwdg.o ./Peripheral/src/ch32v30x_misc.o ./Peripheral/src/ch32v30x_opa.o ./Peripheral/src/ch32v30x_pwr.o ./Peripheral/src/ch32v30x_rcc.o ./Peripheral/src/ch32v30x_rng.o ./Peripheral/src/ch32v30x_rtc.o ./Peripheral/src/ch32v30x_sdio.o ./Peripheral/src/ch32v30x_spi.o ./Peripheral/src/ch32v30x_tim.o ./Peripheral/src/ch32v30x_usart.o ./Peripheral/src/ch32v30x_wwdg.o  ./Debug/debug.o  ./Core/core_riscv.o 
 +
Finished building target: first.elf
 +
 +
Invoking: GNU RISC-V Cross Create Flash Image
 +
riscv-none-embed-objcopy -O ihex "first.elf"  "first.hex"
 +
Invoking: GNU RISC-V Cross Create Listing
 +
riscv-none-embed-objdump --all-headers --demangle --disassemble "first.elf" > "first.lst"
 +
Invoking: GNU RISC-V Cross Print Size
 +
riscv-none-embed-size --format=berkeley "first.elf"
 +
  text   data     bss     dec     hex filename
 +
  7160     136   2068   9364   2494 first.elf
 +
Finished building: first.hex
 +
Finished building: first.siz
 +
 +
 +
Finished building: first.lst
 +
 +
 
 +
11:14:22 Build Finished. 0 errors, 0 warnings. (took 1s.882ms)
 +
</pre>
 +
 
 +
=== Flashing ===
 +
 
 +
Flashing first time should be straight forward.  Click on the flash button:
 +
 
 +
[[File:Flash button.png|100px]]
 +
 
 +
Results in the following console output:
 +
 
 +
<pre>
 +
11:25:02:880 >> Current project vendor is WCH, debugger is WCH-Link
 +
 
 +
11:25:02:880 >> Starting to Open Link in RISC-V APP mode...
 +
11:25:02:886 >> Open Link in RISC-V APP mode Success
 +
 
 +
11:25:02:886 >> Starting to get link mode...
 +
11:25:02:886 >> Link is under APP mode
 +
 
 +
11:25:02:886 >> Starting to compare firmware version...
 +
11:25:02:886 >> No need to update. Already the latest version. Version is v2.3.
 +
 
 +
11:25:02:886 >> Starting to Close Link...
 +
11:25:02:886 >> Close Link Success
 +
11:25:02:886 >> Starting to Erase All...
 +
"/home/lth/MounRiver_Studio_Community_Linux_x64_V110/MRS_Community/toolchain/OpenOCD/bin/openocd" -f "/home/lth/MounRiver_Studio_Community_Linux_x64_V110/MRS_Community/toolchain/OpenOCD/bin/wch-riscv.cfg" -c init -c halt -c "flash erase_sector wch_riscv 0 last" -c exit
 +
Open On-Chip Debugger 0.11.0+dev-02215-gcc0ecfb6d-dirty (2022-03-30-18:53)
 +
Licensed under GNU GPL v2
 +
For bug reports, read
 +
http://openocd.org/doc/doxygen/bugs.html
 +
Info : only one transport option; autoselect 'jtag'
 +
Ready for Remote Connections
 +
Info : WCH-Link version 2.3
 +
Info : wlink_init ok
 +
Info : This adapter doesn't support configurable speed
 +
Info : JTAG tap: riscv.cpu tap/device found: 0x00000001 (mfg: 0x000 (<invalid>), part: 0x0000, ver: 0x0)
 +
Warn : Bypassing JTAG setup events due to errors
 +
Info : [riscv.cpu.0] datacount=2 progbufsize=8
 +
Info : Examined RISC-V core; found 1 harts
 +
Info :  hart 0: XLEN=32, misa=0x40901125
 +
[riscv.cpu.0] Target successfully examined.
 +
Info : starting gdb server for riscv.cpu.0 on 3333
 +
Info : Listening on port 3333 for gdb connections
 +
Info : device id = 0xe339e339
 +
Info : flash size = 58169kbytes
 +
erased sectors 0 through 58168 on flash bank 0 in 0.195708s
 +
 
 +
 
 +
11:25:03:512 >> Starting to Download...
 +
"/home/lth/MounRiver_Studio_Community_Linux_x64_V110/MRS_Community/toolchain/OpenOCD/bin/openocd" -f "/home/lth/MounRiver_Studio_Community_Linux_x64_V110/MRS_Community/toolchain/OpenOCD/bin/wch-riscv.cfg" -c init -c halt -c "program \"/home/lth/src/CH32V307V-EVT-R1/first/obj/first.hex\"" -c exit
 +
Open On-Chip Debugger 0.11.0+dev-02215-gcc0ecfb6d-dirty (2022-03-30-18:53)
 +
Licensed under GNU GPL v2
 +
For bug reports, read
 +
http://openocd.org/doc/doxygen/bugs.html
 +
Info : only one transport option; autoselect 'jtag'
 +
Ready for Remote Connections
 +
Info : WCH-Link version 2.3
 +
Info : wlink_init ok
 +
Info : This adapter doesn't support configurable speed
 +
Info : JTAG tap: riscv.cpu tap/device found: 0x00000001 (mfg: 0x000 (<invalid>), part: 0x0000, ver: 0x0)
 +
Warn : Bypassing JTAG setup events due to errors
 +
Info : [riscv.cpu.0] datacount=2 progbufsize=8
 +
Info : Examined RISC-V core; found 1 harts
 +
Info :  hart 0: XLEN=32, misa=0x40901125
 +
[riscv.cpu.0] Target successfully examined.
 +
Info : starting gdb server for riscv.cpu.0 on 3333
 +
Info : Listening on port 3333 for gdb connections
 +
Info : JTAG tap: riscv.cpu tap/device found: 0x00000001 (mfg: 0x000 (<invalid>), part: 0x0000, ver: 0x0)
 +
Warn : Bypassing JTAG setup events due to errors
 +
** Programming Started **
 +
Info : device id = 0x263e6d6e
 +
Info : flash size = 256kbytes
 +
** Programming Finished **
 +
 
 +
11:25:06:504 >> Starting to Verify...
 +
"/home/lth/MounRiver_Studio_Community_Linux_x64_V110/MRS_Community/toolchain/OpenOCD/bin/openocd" -f "/home/lth/MounRiver_Studio_Community_Linux_x64_V110/MRS_Community/toolchain/OpenOCD/bin/wch-riscv.cfg" -c init -c halt -c "verify_image \"/home/lth/src/CH32V307V-EVT-R1/first/obj/first.hex\"" -c exit
 +
Open On-Chip Debugger 0.11.0+dev-02215-gcc0ecfb6d-dirty (2022-03-30-18:53)
 +
Licensed under GNU GPL v2
 +
For bug reports, read
 +
http://openocd.org/doc/doxygen/bugs.html
 +
Info : only one transport option; autoselect 'jtag'
 +
Ready for Remote Connections
 +
Info : WCH-Link version 2.3
 +
Info : wlink_init ok
 +
Info : This adapter doesn't support configurable speed
 +
Info : JTAG tap: riscv.cpu tap/device found: 0x00000001 (mfg: 0x000 (<invalid>), part: 0x0000, ver: 0x0)
 +
Warn : Bypassing JTAG setup events due to errors
 +
Info : [riscv.cpu.0] datacount=2 progbufsize=8
 +
Info : Examined RISC-V core; found 1 harts
 +
Info :  hart 0: XLEN=32, misa=0x40901125
 +
[riscv.cpu.0] Target successfully examined.
 +
Info : starting gdb server for riscv.cpu.0 on 3333
 +
Info : Listening on port 3333 for gdb connections
 +
Info : Verify Success
 +
 
 +
11:25:08:306 >> Starting to Reset...
 +
"/home/lth/MounRiver_Studio_Community_Linux_x64_V110/MRS_Community/toolchain/OpenOCD/bin/openocd" -f "/home/lth/MounRiver_Studio_Community_Linux_x64_V110/MRS_Community/toolchain/OpenOCD/bin/wch-riscv.cfg" -c init -c wlink_reset_resume -c exit
 +
Open On-Chip Debugger 0.11.0+dev-02215-gcc0ecfb6d-dirty (2022-03-30-18:53)
 +
Licensed under GNU GPL v2
 +
For bug reports, read
 +
http://openocd.org/doc/doxygen/bugs.html
 +
Info : only one transport option; autoselect 'jtag'
 +
Ready for Remote Connections
 +
Info : WCH-Link version 2.3
 +
Info : wlink_init ok
 +
Info : This adapter doesn't support configurable speed
 +
Info : JTAG tap: riscv.cpu tap/device found: 0x00000001 (mfg: 0x000 (<invalid>), part: 0x0000, ver: 0x0)
 +
Warn : Bypassing JTAG setup events due to errors
 +
Info : [riscv.cpu.0] datacount=2 progbufsize=8
 +
Info : Examined RISC-V core; found 1 harts
 +
Info :  hart 0: XLEN=32, misa=0x40901125
 +
[riscv.cpu.0] Target successfully examined.
 +
Info : starting gdb server for riscv.cpu.0 on 3333
 +
Info : Listening on port 3333 for gdb connections
 +
 
 +
------------------------------End ------------------------------
 +
Operation Finished (took 6s.176ms)
 +
</pre>
 +
 
 +
=== Serial console ===
 +
 
 +
In a console window a serial monitor can be run which will produce the following output:
 +
 
 +
<pre>
 +
lth@ncpws04:~/openwrt-bpir2$ microcom -f -s 115200 -p /dev/ttyACM0
 +
connected to /dev/ttyACM0
 +
Escape character: Ctrl-\
 +
Type the escape character to get to the prompt.
 +
SystemClk:72000000
 +
This is printf example
 +
</pre>
 +
 
 +
Notice that the output will actually be printed twice (not shown above) because the MCU is reset twice during the flashing process.
 +
 
 +
=== Single step debugging ===
 +
 
 +
To be added
 +
 
 +
== Getting Started ==
 +
 
 +
=== SysTick Timer ===
 +
 
 +
Coming from [[STM32]], I like to have a counter running calibrated at ms resolution (HAL_GetTick() on [[STM32]]).  By default that is not available on the [[CH32V307]] using the provided SDK.  Fortunately it is quite easy to implement:
 +
 
 +
<pre>
 +
/*
 +
* systick.c
 +
*
 +
*  Created on: Jun 29, 2022
 +
*      Author: lth
 +
*/
 +
 
 +
//#include "ch32v30x.h"
 +
#include "systick.h"
 +
 
 +
uint32_t uwTick = 0;
 +
 
 +
/*********************************************************************
 +
* @fn      SysTick_Handler
 +
*
 +
* @brief  This function handles SysTick interrupt.
 +
*
 +
* @return  none
 +
*/
 +
__attribute__((interrupt("WCH-Interrupt-fast"))) void SysTick_Handler(void) {
 +
        SysTick->SR=0;
 +
        ++uwTick;
 +
}
 +
 
 +
/*********************************************************************
 +
* @fn      Systick_Init
 +
*
 +
* @brief  Initializes Systick.
 +
*
 +
* @return  none
 +
*/
 +
void Systick_Init(void) {
 +
    /*Configuration interrupt priority*/
 +
    NVIC_InitTypeDef NVIC_InitStructure = {0};
 +
    NVIC_InitStructure.NVIC_IRQChannel = SysTicK_IRQn;
 +
    NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;//Seeing priority
 +
    NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;//Response priority
 +
    NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;//Enable
 +
    NVIC_Init(&NVIC_InitStructure);
 +
 
 +
    /*Configuration timer*/
 +
        SysTick->CTLR= 0;
 +
    SysTick->SR  = 0;
 +
    SysTick->CNT = 0;
 +
    SysTick->CMP = SystemCoreClock / 1000; //The latter 1000 represents 1000Hz (that is, 1MS to interrupt once)
 +
    SysTick->CTLR= 0xf;
 +
}
 +
 
 +
*********************************************************************
 +
* @fn      GetTick
 +
*
 +
* @brief  Get current tick in ms resolution
 +
*
 +
* @return  Current tick
 +
*/
 +
uint32_t GetTick() {
 +
        return uwTick;
 +
}
 +
</pre>
 +
 
 +
Call the Systick_Init() at the beginning of main and GetTick() will return the number of milliseconds since startup (with wraparound after about 1 1/2 month).
 +
 
 +
=== GPIOs ===
 +
 
 +
To be added
 +
 
 +
== Miscellaneous Links ==
 +
 
 +
* [https://lcsc.com/product-detail/Development-Boards-Kits_WCH-Jiangsu-Qin-Heng-CH32V307V-EVT-R1_C2943980.html CH32V307V-EVT-R1 on LCSC]
 +
* [https://ipfs.subutai.io/ipfs/QmUu3BmKAuAH8z5S1dKns7gamu3eQ1LqH4wS9mp8udep23/CH32V20x_30xDS0.PDF CH32V307 Datasheet]
 +
* [https://ipfs.subutai.io/ipfs/QmdcXC1qoZ9pTiohkmynisHKoK317P5vJ43MGDuuwq1FqU/CH32FV2x_V3xRM.PDF CH32FV2x_V3x Reference Manual]
 +
* [https://github.com/openwch/ch32v307 Documentation and examples on Github]
 +
* [https://github.com/lbthomsen/CH32V307V-EVT-R1 Initial Experiments]
 +
* [https://verimake.io/2022/01/07/ch32v307-chitu-development-board-tutorial-use-cmake-to-develop/ CH32V307 Chitu Development Board Tutorial: Use CMake to Develop]

Latest revision as of 06:01, 29 June 2022

CH32V307V-EVT-R1 Top View

The CH32V307V-EVT-R1 is a development board for the CH32V307 RISC-V MCU. This page contains my initial notes on how to work with this board and the CH32V307 MCU. My initial experiments are also on Github here: https://github.com/lbthomsen/CH32V307V-EVT-R1.

If you got experience and/or questions in relation to this page, please feel free to post them on our Facebook Group.

As a development board, this one is clearly inspired by ST's Nucleo boards as it includes an Arduino header as well as a built-in flash/debug tool (they call it WCH-Link also inspired by ST-Link).

I never really understood why they (both this one and ST) choose to include an Arduino header. As far as I know, most - if not all - Arduino boards are running at 5V, which makes them possibly incompatible with the 3.3V used on boards such as this.

The CH32V307V-EVT-R1 board itself is readily availble from LCSC at around $12 (+ shipping - and you owe me a couple of freebies for the free advertising LCSC).

Hardware Description

It is worth noticing that contrary to various ST development boards, the two user LED's and the user button are by default only wired to the header, not the MCU itself. This means that a jumper lead is necessary to use any of these.

MounRiver Studio

Installing

The MounRiver Studio community edition can be downloaded from http://www.mounriver.com/download (warning, insecure link).

Installing it (on Linux) is really quite simple. Unpack the downloaded archive: 

lth@ncpws04:~$ tar xvf Downloads/MounRiver_Studio_Community_Linux_x64_V110.tar.xz

After the archive has been unpacked a few tweaks are necessary. MounRiver provided a script for this: 

lth@ncpws04:~$ cd MounRiver_Studio_Community_Linux_x64_V110/beforeinstall/
lth@ncpws04:~/MounRiver_Studio_Community_Linux_x64_V110/beforeinstall$ ./start.sh

And that is about it. You can now run MounRiver Studio like this: 

lth@ncpws04:~$ ~/MounRiver_Studio_Community_Linux_x64_V110/MRS_Community/MounRiver\ Studio_Community

Creating first project

Once the MounRiver Studio has been started, a new project can be created:

File - New project.png

In the resulting dialog, first select the appropriate MCU, then give the project a name:

Create project.png

Notice that there is a bug which change the project name once a MCU is selected, so unless you want all your projects to be named after the MCU, do change the name after you select the MCU.

Pressing Ok will generate a source tree, including a main.c in the User directory: 

/********************************** (C) COPYRIGHT *******************************
* File Name          : main.c
* Author             : WCH
* Version            : V1.0.0
* Date               : 2021/06/06
* Description        : Main program body.
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
* SPDX-License-Identifier: Apache-2.0
*******************************************************************************/

/*
 *@Note
 串口打印调试例程：
 USART1_Tx(PA9)。
 本例程演示使用 USART1(PA9) 作打印调试口输出。

*/

#include "debug.h"


/* Global typedef */

/* Global define */

/* Global Variable */


/*********************************************************************
 * @fn      main
 *
 * @brief   Main program.
 *
 * @return  none
 */
int main(void)
{
	NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2);
	Delay_Init();
	USART_Printf_Init(115200);
	printf("SystemClk:%d\r\n",SystemCoreClock);

	printf("This is printf example\r\n");

	while(1)
    {

	}
}

As can be seen, the default application will print out a few statements and then do nothing.

By selecting Project/Build Project

Project-Build.png

The project should be successfully build. The Console window will show the result of the build process: 

11:14:20 **** Build of configuration obj for project first ****
make -j4 all 
Building file: ../User/ch32v30x_it.c
Building file: ../User/main.c
Building file: ../User/system_ch32v30x.c
Invoking: GNU RISC-V Cross C Compiler
riscv-none-embed-gcc -march=rv32imac -mabi=ilp32 -msmall-data-limit=8 -mno-save-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wunused -Wuninitialized  -g -I"/home/lth/src/CH32V307V-EVT-R1/first/Debug" -I"/home/lth/src/CH32V307V-EVT-R1/first/Core" -I"/home/lth/src/CH32V307V-EVT-R1/first/User" -I"/home/lth/src/CH32V307V-EVT-R1/first/Peripheral/inc" -std=gnu99 -MMD -MP -MF"User/ch32v30x_it.d" -MT"User/ch32v30x_it.o" -c -o "User/ch32v30x_it.o" "../User/ch32v30x_it.c"
Invoking: GNU RISC-V Cross C Compiler
riscv-none-embed-gcc -march=rv32imac -mabi=ilp32 -msmall-data-limit=8 -mno-save-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wunused -Wuninitialized  -g -I"/home/lth/src/CH32V307V-EVT-R1/first/Debug" -I"/home/lth/src/CH32V307V-EVT-R1/first/Core" -I"/home/lth/src/CH32V307V-EVT-R1/first/User" -I"/home/lth/src/CH32V307V-EVT-R1/first/Peripheral/inc" -std=gnu99 -MMD -MP -MF"User/system_ch32v30x.d" -MT"User/system_ch32v30x.o" -c -o "User/system_ch32v30x.o" "../User/system_ch32v30x.c"
Invoking: GNU RISC-V Cross C Compiler
Building file: ../Startup/startup_ch32v30x_D8C.S
riscv-none-embed-gcc -march=rv32imac -mabi=ilp32 -msmall-data-limit=8 -mno-save-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wunused -Wuninitialized  -g -I"/home/lth/src/CH32V307V-EVT-R1/first/Debug" -I"/home/lth/src/CH32V307V-EVT-R1/first/Core" -I"/home/lth/src/CH32V307V-EVT-R1/first/User" -I"/home/lth/src/CH32V307V-EVT-R1/first/Peripheral/inc" -std=gnu99 -MMD -MP -MF"User/main.d" -MT"User/main.o" -c -o "User/main.o" "../User/main.c"
Invoking: GNU RISC-V Cross Assembler
riscv-none-embed-gcc -march=rv32imac -mabi=ilp32 -msmall-data-limit=8 -mno-save-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wunused -Wuninitialized  -g -x assembler -I"/home/lth/src/CH32V307V-EVT-R1/first/Startup" -MMD -MP -MF"Startup/startup_ch32v30x_D8C.d" -MT"Startup/startup_ch32v30x_D8C.o" -c -o "Startup/startup_ch32v30x_D8C.o" "../Startup/startup_ch32v30x_D8C.S"
Finished building: ../Startup/startup_ch32v30x_D8C.S
 
Building file: ../Peripheral/src/ch32v30x_adc.c
Invoking: GNU RISC-V Cross C Compiler
riscv-none-embed-gcc -march=rv32imac -mabi=ilp32 -msmall-data-limit=8 -mno-save-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wunused -Wuninitialized  -g -I"/home/lth/src/CH32V307V-EVT-R1/first/Debug" -I"/home/lth/src/CH32V307V-EVT-R1/first/Core" -I"/home/lth/src/CH32V307V-EVT-R1/first/User" -I"/home/lth/src/CH32V307V-EVT-R1/first/Peripheral/inc" -std=gnu99 -MMD -MP -MF"Peripheral/src/ch32v30x_adc.d" -MT"Peripheral/src/ch32v30x_adc.o" -c -o "Peripheral/src/ch32v30x_adc.o" "../Peripheral/src/ch32v30x_adc.c"
Finished building: ../User/main.c

(!!!repetitive stuff removed here!!!)
 
Invoking: GNU RISC-V Cross C Compiler
riscv-none-embed-gcc -march=rv32imac -mabi=ilp32 -msmall-data-limit=8 -mno-save-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wunused -Wuninitialized  -g -I"/home/lth/src/CH32V307V-EVT-R1/first/Debug" -I"/home/lth/src/CH32V307V-EVT-R1/first/Core" -I"/home/lth/src/CH32V307V-EVT-R1/first/User" -I"/home/lth/src/CH32V307V-EVT-R1/first/Peripheral/inc" -std=gnu99 -MMD -MP -MF"Peripheral/src/ch32v30x_usart.d" -MT"Peripheral/src/ch32v30x_usart.o" -c -o "Peripheral/src/ch32v30x_usart.o" "../Peripheral/src/ch32v30x_usart.c"
Building file: ../Peripheral/src/ch32v30x_wwdg.c
Invoking: GNU RISC-V Cross C Compiler
riscv-none-embed-gcc -march=rv32imac -mabi=ilp32 -msmall-data-limit=8 -mno-save-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wunused -Wuninitialized  -g -I"/home/lth/src/CH32V307V-EVT-R1/first/Debug" -I"/home/lth/src/CH32V307V-EVT-R1/first/Core" -I"/home/lth/src/CH32V307V-EVT-R1/first/User" -I"/home/lth/src/CH32V307V-EVT-R1/first/Peripheral/inc" -std=gnu99 -MMD -MP -MF"Peripheral/src/ch32v30x_wwdg.d" -MT"Peripheral/src/ch32v30x_wwdg.o" -c -o "Peripheral/src/ch32v30x_wwdg.o" "../Peripheral/src/ch32v30x_wwdg.c"
Finished building: ../Peripheral/src/ch32v30x_rcc.c
 
Building file: ../Debug/debug.c
Invoking: GNU RISC-V Cross C Compiler
riscv-none-embed-gcc -march=rv32imac -mabi=ilp32 -msmall-data-limit=8 -mno-save-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wunused -Wuninitialized  -g -I"/home/lth/src/CH32V307V-EVT-R1/first/Debug" -I"/home/lth/src/CH32V307V-EVT-R1/first/Core" -I"/home/lth/src/CH32V307V-EVT-R1/first/User" -I"/home/lth/src/CH32V307V-EVT-R1/first/Peripheral/inc" -std=gnu99 -MMD -MP -MF"Debug/debug.d" -MT"Debug/debug.o" -c -o "Debug/debug.o" "../Debug/debug.c"
Finished building: ../Peripheral/src/ch32v30x_wwdg.c
 
Building file: ../Core/core_riscv.c
Invoking: GNU RISC-V Cross C Compiler
riscv-none-embed-gcc -march=rv32imac -mabi=ilp32 -msmall-data-limit=8 -mno-save-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wunused -Wuninitialized  -g -I"/home/lth/src/CH32V307V-EVT-R1/first/Debug" -I"/home/lth/src/CH32V307V-EVT-R1/first/Core" -I"/home/lth/src/CH32V307V-EVT-R1/first/User" -I"/home/lth/src/CH32V307V-EVT-R1/first/Peripheral/inc" -std=gnu99 -MMD -MP -MF"Core/core_riscv.d" -MT"Core/core_riscv.o" -c -o "Core/core_riscv.o" "../Core/core_riscv.c"
Finished building: ../Debug/debug.c
 
Finished building: ../Core/core_riscv.c
 
Finished building: ../Peripheral/src/ch32v30x_usart.c
 
Finished building: ../Peripheral/src/ch32v30x_tim.c
 
Building target: first.elf
Invoking: GNU RISC-V Cross C Linker
riscv-none-embed-gcc -march=rv32imac -mabi=ilp32 -msmall-data-limit=8 -mno-save-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wunused -Wuninitialized  -g -T "/home/lth/src/CH32V307V-EVT-R1/first/Ld/Link.ld" -nostartfiles -Xlinker --gc-sections -Wl,-Map,"first.map" --specs=nano.specs --specs=nosys.specs -o "first.elf" ./User/ch32v30x_it.o ./User/main.o ./User/system_ch32v30x.o  ./Startup/startup_ch32v30x_D8C.o  ./Peripheral/src/ch32v30x_adc.o ./Peripheral/src/ch32v30x_bkp.o ./Peripheral/src/ch32v30x_can.o ./Peripheral/src/ch32v30x_crc.o ./Peripheral/src/ch32v30x_dac.o ./Peripheral/src/ch32v30x_dbgmcu.o ./Peripheral/src/ch32v30x_dma.o ./Peripheral/src/ch32v30x_dvp.o ./Peripheral/src/ch32v30x_eth.o ./Peripheral/src/ch32v30x_exti.o ./Peripheral/src/ch32v30x_flash.o ./Peripheral/src/ch32v30x_fsmc.o ./Peripheral/src/ch32v30x_gpio.o ./Peripheral/src/ch32v30x_i2c.o ./Peripheral/src/ch32v30x_iwdg.o ./Peripheral/src/ch32v30x_misc.o ./Peripheral/src/ch32v30x_opa.o ./Peripheral/src/ch32v30x_pwr.o ./Peripheral/src/ch32v30x_rcc.o ./Peripheral/src/ch32v30x_rng.o ./Peripheral/src/ch32v30x_rtc.o ./Peripheral/src/ch32v30x_sdio.o ./Peripheral/src/ch32v30x_spi.o ./Peripheral/src/ch32v30x_tim.o ./Peripheral/src/ch32v30x_usart.o ./Peripheral/src/ch32v30x_wwdg.o  ./Debug/debug.o  ./Core/core_riscv.o   
Finished building target: first.elf
 
Invoking: GNU RISC-V Cross Create Flash Image
riscv-none-embed-objcopy -O ihex "first.elf"  "first.hex"
Invoking: GNU RISC-V Cross Create Listing
riscv-none-embed-objdump --all-headers --demangle --disassemble "first.elf" > "first.lst"
Invoking: GNU RISC-V Cross Print Size
riscv-none-embed-size --format=berkeley "first.elf"
   text	   data	    bss	    dec	    hex	filename
   7160	    136	   2068	   9364	   2494	first.elf
Finished building: first.hex
Finished building: first.siz
 
 
Finished building: first.lst
 

11:14:22 Build Finished. 0 errors, 0 warnings. (took 1s.882ms)

Flashing

Flashing first time should be straight forward. Click on the flash button:

Flash button.png

Results in the following console output: 

11:25:02:880 >> Current project vendor is WCH, debugger is WCH-Link

11:25:02:880 >> Starting to Open Link in RISC-V APP mode...
11:25:02:886 >> Open Link in RISC-V APP mode Success

11:25:02:886 >> Starting to get link mode...
11:25:02:886 >> Link is under APP mode

11:25:02:886 >> Starting to compare firmware version...
11:25:02:886 >> No need to update. Already the latest version. Version is v2.3.

11:25:02:886 >> Starting to Close Link...
11:25:02:886 >> Close Link Success
11:25:02:886 >> Starting to Erase All...
"/home/lth/MounRiver_Studio_Community_Linux_x64_V110/MRS_Community/toolchain/OpenOCD/bin/openocd" -f "/home/lth/MounRiver_Studio_Community_Linux_x64_V110/MRS_Community/toolchain/OpenOCD/bin/wch-riscv.cfg" -c init -c halt -c "flash erase_sector wch_riscv 0 last" -c exit
Open On-Chip Debugger 0.11.0+dev-02215-gcc0ecfb6d-dirty (2022-03-30-18:53)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
Ready for Remote Connections
Info : WCH-Link version 2.3 
Info : wlink_init ok
Info : This adapter doesn't support configurable speed
Info : JTAG tap: riscv.cpu tap/device found: 0x00000001 (mfg: 0x000 (<invalid>), part: 0x0000, ver: 0x0)
Warn : Bypassing JTAG setup events due to errors
Info : [riscv.cpu.0] datacount=2 progbufsize=8
Info : Examined RISC-V core; found 1 harts
Info :  hart 0: XLEN=32, misa=0x40901125
[riscv.cpu.0] Target successfully examined.
Info : starting gdb server for riscv.cpu.0 on 3333
Info : Listening on port 3333 for gdb connections
Info : device id = 0xe339e339
Info : flash size = 58169kbytes
erased sectors 0 through 58168 on flash bank 0 in 0.195708s


11:25:03:512 >> Starting to Download...
"/home/lth/MounRiver_Studio_Community_Linux_x64_V110/MRS_Community/toolchain/OpenOCD/bin/openocd" -f "/home/lth/MounRiver_Studio_Community_Linux_x64_V110/MRS_Community/toolchain/OpenOCD/bin/wch-riscv.cfg" -c init -c halt -c "program \"/home/lth/src/CH32V307V-EVT-R1/first/obj/first.hex\"" -c exit
Open On-Chip Debugger 0.11.0+dev-02215-gcc0ecfb6d-dirty (2022-03-30-18:53)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
Ready for Remote Connections
Info : WCH-Link version 2.3 
Info : wlink_init ok
Info : This adapter doesn't support configurable speed
Info : JTAG tap: riscv.cpu tap/device found: 0x00000001 (mfg: 0x000 (<invalid>), part: 0x0000, ver: 0x0)
Warn : Bypassing JTAG setup events due to errors
Info : [riscv.cpu.0] datacount=2 progbufsize=8
Info : Examined RISC-V core; found 1 harts
Info :  hart 0: XLEN=32, misa=0x40901125
[riscv.cpu.0] Target successfully examined.
Info : starting gdb server for riscv.cpu.0 on 3333
Info : Listening on port 3333 for gdb connections
Info : JTAG tap: riscv.cpu tap/device found: 0x00000001 (mfg: 0x000 (<invalid>), part: 0x0000, ver: 0x0)
Warn : Bypassing JTAG setup events due to errors
** Programming Started **
Info : device id = 0x263e6d6e
Info : flash size = 256kbytes
** Programming Finished **

11:25:06:504 >> Starting to Verify...
"/home/lth/MounRiver_Studio_Community_Linux_x64_V110/MRS_Community/toolchain/OpenOCD/bin/openocd" -f "/home/lth/MounRiver_Studio_Community_Linux_x64_V110/MRS_Community/toolchain/OpenOCD/bin/wch-riscv.cfg" -c init -c halt -c "verify_image \"/home/lth/src/CH32V307V-EVT-R1/first/obj/first.hex\"" -c exit
Open On-Chip Debugger 0.11.0+dev-02215-gcc0ecfb6d-dirty (2022-03-30-18:53)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
Ready for Remote Connections
Info : WCH-Link version 2.3 
Info : wlink_init ok
Info : This adapter doesn't support configurable speed
Info : JTAG tap: riscv.cpu tap/device found: 0x00000001 (mfg: 0x000 (<invalid>), part: 0x0000, ver: 0x0)
Warn : Bypassing JTAG setup events due to errors
Info : [riscv.cpu.0] datacount=2 progbufsize=8
Info : Examined RISC-V core; found 1 harts
Info :  hart 0: XLEN=32, misa=0x40901125
[riscv.cpu.0] Target successfully examined.
Info : starting gdb server for riscv.cpu.0 on 3333
Info : Listening on port 3333 for gdb connections
Info : Verify Success

11:25:08:306 >> Starting to Reset...
"/home/lth/MounRiver_Studio_Community_Linux_x64_V110/MRS_Community/toolchain/OpenOCD/bin/openocd" -f "/home/lth/MounRiver_Studio_Community_Linux_x64_V110/MRS_Community/toolchain/OpenOCD/bin/wch-riscv.cfg" -c init -c wlink_reset_resume -c exit
Open On-Chip Debugger 0.11.0+dev-02215-gcc0ecfb6d-dirty (2022-03-30-18:53)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
Ready for Remote Connections
Info : WCH-Link version 2.3 
Info : wlink_init ok
Info : This adapter doesn't support configurable speed
Info : JTAG tap: riscv.cpu tap/device found: 0x00000001 (mfg: 0x000 (<invalid>), part: 0x0000, ver: 0x0)
Warn : Bypassing JTAG setup events due to errors
Info : [riscv.cpu.0] datacount=2 progbufsize=8
Info : Examined RISC-V core; found 1 harts
Info :  hart 0: XLEN=32, misa=0x40901125
[riscv.cpu.0] Target successfully examined.
Info : starting gdb server for riscv.cpu.0 on 3333
Info : Listening on port 3333 for gdb connections

------------------------------End ------------------------------
Operation Finished (took 6s.176ms)

Serial console

In a console window a serial monitor can be run which will produce the following output: 

lth@ncpws04:~/openwrt-bpir2$ microcom -f -s 115200 -p /dev/ttyACM0
connected to /dev/ttyACM0
Escape character: Ctrl-\
Type the escape character to get to the prompt.
SystemClk:72000000
This is printf example

Notice that the output will actually be printed twice (not shown above) because the MCU is reset twice during the flashing process.

Single step debugging

To be added

Getting Started

SysTick Timer

Coming from STM32, I like to have a counter running calibrated at ms resolution (HAL_GetTick() on STM32). By default that is not available on the CH32V307 using the provided SDK. Fortunately it is quite easy to implement: 

/*
 * systick.c
 *
 *  Created on: Jun 29, 2022
 *      Author: lth
 */

//#include "ch32v30x.h"
#include "systick.h"

uint32_t uwTick = 0;

/*********************************************************************
 * @fn      SysTick_Handler
 *
 * @brief   This function handles SysTick interrupt.
 *
 * @return  none
 */
__attribute__((interrupt("WCH-Interrupt-fast"))) void SysTick_Handler(void) {
        SysTick->SR=0;
        ++uwTick;
}

/*********************************************************************
 * @fn      Systick_Init
 *
 * @brief   Initializes Systick.
 *
 * @return  none
 */
void Systick_Init(void) {
    /*Configuration interrupt priority*/
    NVIC_InitTypeDef NVIC_InitStructure = {0};
    NVIC_InitStructure.NVIC_IRQChannel = SysTicK_IRQn;
    NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;//Seeing priority
    NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;//Response priority
    NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;//Enable
    NVIC_Init(&NVIC_InitStructure);

    /*Configuration timer*/
        SysTick->CTLR= 0;
    SysTick->SR  = 0;
    SysTick->CNT = 0;
    SysTick->CMP = SystemCoreClock / 1000; //The latter 1000 represents 1000Hz (that is, 1MS to interrupt once)
    SysTick->CTLR= 0xf;
}

*********************************************************************
 * @fn      GetTick
 *
 * @brief   Get current tick in ms resolution
 *
 * @return  Current tick
 */
uint32_t GetTick() {
        return uwTick;
}

Call the Systick_Init() at the beginning of main and GetTick() will return the number of milliseconds since startup (with wraparound after about 1 1/2 month).

GPIOs

To be added

Miscellaneous Links

Retrieved from "https://stm32world.com/w/index.php?title=CH32V307V-EVT-R1&oldid=2846"