Difference between revisions of "User:Lth/BPIR2 OTG"
< User:Lth
Jump to navigation
Jump to search
| (3 intermediate revisions by the same user not shown) | |||
| Line 144: | Line 144: | ||
</pre> | </pre> | ||
| − | == OpenWrt Attempt | + | === dmesg === |
| + | <pre> | ||
| + | root@bpi-r2:~# dmesg | ||
| + | [ 0.000000] Booting Linux on physical CPU 0x0 | ||
| + | [ 0.000000] Linux version 5.15.41-bpi-r2bpi-r2-openwrt (lth@ncpws04) (arm-linux-gnueabihf-gcc (Debian 11.3.0-3) 11.3.0, GNU ld (GNU Binutils for Debian) 2.38) #5 SMP Tue Jun 7 09:24:33 +08 2022 | ||
| + | [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d | ||
| + | [ 0.000000] CPU: div instructions available: patching division code | ||
| + | [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | ||
| + | [ 0.000000] OF: fdt: Machine model: Bananapi BPI-R2 | ||
| + | [ 0.000000] printk: bootconsole [earlycon0] enabled | ||
| + | [ 0.000000] Memory policy: Data cache writealloc | ||
| + | [ 0.000000] [WMT-CONSYS-HW][W]reserve_memory_consys_fn: name: consys-reserve-memory, base: 0xffe00000, size: 0x100000 | ||
| + | [ 0.000000] OF: reserved mem: initialized node consys-reserve-memory, compatible id mediatek,consys-reserve-memory | ||
| + | [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 | ||
| + | [ 0.000000] Zone ranges: | ||
| + | [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fffffff] | ||
| + | [ 0.000000] HighMem [mem 0x00000000a0000000-0x00000000ffffefff] | ||
| + | [ 0.000000] Movable zone start for each node | ||
| + | [ 0.000000] Early memory node ranges | ||
| + | [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000ffdfffff] | ||
| + | [ 0.000000] node 0: [mem 0x00000000ffe00000-0x00000000ffefffff] | ||
| + | [ 0.000000] node 0: [mem 0x00000000fff00000-0x00000000ffffefff] | ||
| + | [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffefff] | ||
| + | [ 0.000000] percpu: Embedded 16 pages/cpu s36044 r8192 d21300 u65536 | ||
| + | [ 0.000000] pcpu-alloc: s36044 r8192 d21300 u65536 alloc=16*4096 | ||
| + | [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 | ||
| + | [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 523135 | ||
| + | [ 0.000000] Kernel command line: board=bpi-r2 earlyprintk console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait vmalloc=496M debug=7 initcall_debug=0 video=1920x1080 console=tty1 fbcon=map:0 drm.debug=0x7 | ||
| + | [ 0.000000] Unknown kernel command line parameters "board=bpi-r2", will be passed to user space. | ||
| + | [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) | ||
| + | [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) | ||
| + | [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | ||
| + | [ 0.000000] Memory: 1989724K/2097148K available (13312K kernel code, 1569K rwdata, 4504K rodata, 1024K init, 563K bss, 41888K reserved, 65536K cma-reserved, 1506300K highmem) | ||
| + | [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | ||
| + | [ 0.000000] ftrace: allocating 43504 entries in 128 pages | ||
| + | [ 0.000000] ftrace: allocated 128 pages with 1 groups | ||
| + | [ 0.000000] trace event string verifier disabled | ||
| + | [ 0.000000] rcu: Hierarchical RCU implementation. | ||
| + | [ 0.000000] rcu: RCU event tracing is enabled. | ||
| + | [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. | ||
| + | [ 0.000000] Rude variant of Tasks RCU enabled. | ||
| + | [ 0.000000] Tracing variant of Tasks RCU enabled. | ||
| + | [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. | ||
| + | [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | ||
| + | [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 | ||
| + | [ 0.000000] random: get_random_bytes called from start_kernel+0x4a4/0x678 with crng_init=0 | ||
| + | [ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys). | ||
| + | [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns | ||
| + | [ 0.000001] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns | ||
| + | [ 0.008062] Switching to timer-based delay loop, resolution 76ns | ||
| + | [ 0.014278] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 147020034397 ns | ||
| + | [ 0.023571] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 165191050201ns | ||
| + | [ 0.032103] Console: colour dummy device 80x30 | ||
| + | [ 0.036587] printk: console [tty1] enabled | ||
| + | [ 0.040715] printk: bootconsole [earlycon0] disabled | ||
| + | [ 0.045773] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000) | ||
| + | [ 0.045808] pid_max: default: 32768 minimum: 301 | ||
| + | [ 0.046038] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) | ||
| + | [ 0.046073] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) | ||
| + | [ 0.047032] CPU: Testing write buffer coherency: ok | ||
| + | [ 0.047405] CPU0: update cpu_capacity 1024 | ||
| + | [ 0.047436] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | ||
| + | [ 0.048321] Setting up static identity map for 0x80100000 - 0x80100060 | ||
| + | [ 0.048481] rcu: Hierarchical SRCU implementation. | ||
| + | [ 0.049584] smp: Bringing up secondary CPUs ... | ||
| + | [ 0.050214] CPU1: update cpu_capacity 1024 | ||
| + | [ 0.050229] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | ||
| + | [ 0.050973] CPU2: update cpu_capacity 1024 | ||
| + | [ 0.050989] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | ||
| + | [ 0.051676] CPU3: update cpu_capacity 1024 | ||
| + | [ 0.051692] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | ||
| + | [ 0.051823] smp: Brought up 1 node, 4 CPUs | ||
| + | [ 0.051906] SMP: Total of 4 processors activated (104.00 BogoMIPS). | ||
| + | [ 0.051925] CPU: All CPU(s) started in SVC mode. | ||
| + | [ 0.052688] devtmpfs: initialized | ||
| + | [ 0.060867] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3 | ||
| + | [ 0.061238] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | ||
| + | [ 0.061289] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | ||
| + | [ 0.063821] pinctrl core: initialized pinctrl subsystem | ||
| + | [ 0.064965] NET: Registered PF_NETLINK/PF_ROUTE protocol family | ||
| + | [ 0.067473] DMA: preallocated 256 KiB pool for atomic coherent allocations | ||
| + | [ 0.068796] thermal_sys: Registered thermal governor 'step_wise' | ||
| + | [ 0.069193] No ATAGs? | ||
| + | [ 0.069396] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. | ||
| + | [ 0.069433] hw-breakpoint: maximum watchpoint size is 8 bytes. | ||
| + | [ 0.143197] gpiochip_find_base: found new base at 232 | ||
| + | [ 0.143814] gpio gpiochip0: (1000b000.pinctrl): added GPIO chardev (254:0) | ||
| + | [ 0.143963] gpio gpiochip0: registered GPIOs 232 to 511 on 1000b000.pinctrl | ||
| + | [ 0.143998] gpio gpiochip0: (1000b000.pinctrl): created GPIO range 0->279 ==> 1000b000.pinctrl PIN 0->279 | ||
| + | [ 0.179304] platform 14015000.hdmi: Fixing up cyclic dependency with 14014000.dpi | ||
| + | [ 0.181392] platform connector: Fixing up cyclic dependency with 14015000.hdmi | ||
| + | [ 0.366455] raid6: neonx8 gen() 678 MB/s | ||
| + | [ 0.536591] raid6: neonx8 xor() 551 MB/s | ||
| + | [ 0.706740] raid6: neonx4 gen() 935 MB/s | ||
| + | [ 0.876858] raid6: neonx4 xor() 711 MB/s | ||
| + | [ 1.047013] raid6: neonx2 gen() 944 MB/s | ||
| + | [ 1.217155] raid6: neonx2 xor() 692 MB/s | ||
| + | [ 1.387304] raid6: neonx1 gen() 773 MB/s | ||
| + | [ 1.557453] raid6: neonx1 xor() 568 MB/s | ||
| + | [ 1.727669] raid6: int32x8 gen() 244 MB/s | ||
| + | [ 1.897775] raid6: int32x8 xor() 151 MB/s | ||
| + | [ 2.067963] raid6: int32x4 gen() 253 MB/s | ||
| + | [ 2.238059] raid6: int32x4 xor() 163 MB/s | ||
| + | [ 2.408287] raid6: int32x2 gen() 307 MB/s | ||
| + | [ 2.578393] raid6: int32x2 xor() 185 MB/s | ||
| + | [ 2.748561] raid6: int32x1 gen() 324 MB/s | ||
| + | [ 2.918671] raid6: int32x1 xor() 180 MB/s | ||
| + | [ 2.918692] raid6: using algorithm neonx2 gen() 944 MB/s | ||
| + | [ 2.918709] raid6: .... xor() 692 MB/s, rmw enabled | ||
| + | [ 2.918726] raid6: using neon recovery algorithm | ||
| + | [ 2.919349] reg-fixed-voltage regulator-1p8v: GPIO lookup for consumer (null) | ||
| + | [ 2.919391] reg-fixed-voltage regulator-1p8v: using device tree for GPIO lookup | ||
| + | [ 2.919426] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1p8v[0]' | ||
| + | [ 2.919477] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1p8v[0]' | ||
| + | [ 2.919516] reg-fixed-voltage regulator-1p8v: using lookup tables for GPIO lookup | ||
| + | [ 2.919542] reg-fixed-voltage regulator-1p8v: No GPIO consumer (null) found | ||
| + | [ 2.919912] reg-fixed-voltage regulator-3p3v: GPIO lookup for consumer (null) | ||
| + | [ 2.919947] reg-fixed-voltage regulator-3p3v: using device tree for GPIO lookup | ||
| + | [ 2.919980] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-3p3v[0]' | ||
| + | [ 2.920023] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-3p3v[0]' | ||
| + | [ 2.920060] reg-fixed-voltage regulator-3p3v: using lookup tables for GPIO lookup | ||
| + | [ 2.920085] reg-fixed-voltage regulator-3p3v: No GPIO consumer (null) found | ||
| + | [ 2.920428] reg-fixed-voltage regulator-5v: GPIO lookup for consumer (null) | ||
| + | [ 2.920459] reg-fixed-voltage regulator-5v: using device tree for GPIO lookup | ||
| + | [ 2.920490] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-5v[0]' | ||
| + | [ 2.920534] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-5v[0]' | ||
| + | [ 2.920570] reg-fixed-voltage regulator-5v: using lookup tables for GPIO lookup | ||
| + | [ 2.920595] reg-fixed-voltage regulator-5v: No GPIO consumer (null) found | ||
| + | [ 2.920887] reg-fixed-voltage fixedregulator@0: GPIO lookup for consumer (null) | ||
| + | [ 2.920919] reg-fixed-voltage fixedregulator@0: using device tree for GPIO lookup | ||
| + | [ 2.920951] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator@0[0]' | ||
| + | [ 2.920994] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator@0[0]' | ||
| + | [ 2.921031] reg-fixed-voltage fixedregulator@0: using lookup tables for GPIO lookup | ||
| + | [ 2.921056] reg-fixed-voltage fixedregulator@0: No GPIO consumer (null) found | ||
| + | [ 2.921327] iommu: Default domain type: Translated | ||
| + | [ 2.921353] iommu: DMA domain TLB invalidation policy: strict mode | ||
| + | [ 2.921578] vgaarb: loaded | ||
| + | [ 2.922103] SCSI subsystem initialized | ||
| + | [ 2.922385] libata version 3.00 loaded. | ||
| + | [ 2.922642] usbcore: registered new interface driver usbfs | ||
| + | [ 2.922712] usbcore: registered new interface driver hub | ||
| + | [ 2.922797] usbcore: registered new device driver usb | ||
| + | [ 2.923130] mc: Linux media interface: v0.10 | ||
| + | [ 2.923196] videodev: Linux video capture interface: v2.00 | ||
| + | [ 2.923290] pps_core: LinuxPPS API ver. 1 registered | ||
| + | [ 2.923310] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | ||
| + | [ 2.923350] PTP clock support registered | ||
| + | [ 2.924151] mediatek,efuse 10206000.efuse: GPIO lookup for consumer wp | ||
| + | [ 2.924196] mediatek,efuse 10206000.efuse: using device tree for GPIO lookup | ||
| + | [ 2.924229] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/efuse@10206000[0]' | ||
| + | [ 2.924281] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/efuse@10206000[0]' | ||
| + | [ 2.924322] mediatek,efuse 10206000.efuse: using lookup tables for GPIO lookup | ||
| + | [ 2.924347] mediatek,efuse 10206000.efuse: No GPIO consumer wp found | ||
| + | [ 2.924818] Advanced Linux Sound Architecture Driver Initialized. | ||
| + | [ 2.925642] Bluetooth: Core ver 2.22 | ||
| + | [ 2.925728] NET: Registered PF_BLUETOOTH protocol family | ||
| + | [ 2.925749] Bluetooth: HCI device and connection manager initialized | ||
| + | [ 2.925776] Bluetooth: HCI socket layer initialized | ||
| + | [ 2.925797] Bluetooth: L2CAP socket layer initialized | ||
| + | [ 2.925830] Bluetooth: SCO socket layer initialized | ||
| + | [ 2.926545] clocksource: Switched to clocksource arch_sys_counter | ||
| + | [ 3.005895] NET: Registered PF_INET protocol family | ||
| + | [ 3.006086] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) | ||
| + | [ 3.006954] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) | ||
| + | [ 3.007038] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) | ||
| + | [ 3.007102] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) | ||
| + | [ 3.007178] TCP: Hash tables configured (established 4096 bind 4096) | ||
| + | [ 3.007316] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) | ||
| + | [ 3.007376] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) | ||
| + | [ 3.007603] NET: Registered PF_UNIX/PF_LOCAL protocol family | ||
| + | [ 3.017278] RPC: Registered named UNIX socket transport module. | ||
| + | [ 3.017326] RPC: Registered udp transport module. | ||
| + | [ 3.017343] RPC: Registered tcp transport module. | ||
| + | [ 3.017359] RPC: Registered tcp NFSv4.1 backchannel transport module. | ||
| + | [ 3.017383] PCI: CLS 0 bytes, default 64 | ||
| + | [ 4.070278] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available | ||
| + | [ 4.072179] Initialise system trusted keyrings | ||
| + | [ 4.072482] workingset: timestamp_bits=14 max_order=19 bucket_order=5 | ||
| + | [ 4.080465] NFS: Registering the id_resolver key type | ||
| + | [ 4.080547] Key type id_resolver registered | ||
| + | [ 4.080567] Key type id_legacy registered | ||
| + | [ 4.080686] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | ||
| + | [ 4.080718] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | ||
| + | [ 4.171415] xor: measuring software checksum speed | ||
| + | [ 4.181213] arm4regs : 1014 MB/sec | ||
| + | [ 4.193047] 8regs : 835 MB/sec | ||
| + | [ 4.203384] 32regs : 954 MB/sec | ||
| + | [ 4.210410] neon : 1407 MB/sec | ||
| + | [ 4.210430] xor: using function: neon (1407 MB/sec) | ||
| + | [ 4.210453] async_tx: api initialized (async) | ||
| + | [ 4.210474] Key type asymmetric registered | ||
| + | [ 4.210491] Asymmetric key parser 'x509' registered | ||
| + | [ 4.210650] bounce: pool size: 64 pages | ||
| + | [ 4.210732] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) | ||
| + | [ 4.210763] io scheduler mq-deadline registered | ||
| + | [ 4.210781] io scheduler kyber registered | ||
| + | [ 4.214410] mediatek-hdmi-phy 10209100.hdmi-phy: Using default TX DRV impedance: 4.2k/36 | ||
| + | [ 4.215779] mediatek-mipi-tx 10010000.dsi-phy: can't get nvmem_cell_get, ignore it | ||
| + | [ 4.282510] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | ||
| + | [ 4.284637] printk: console [ttyS0] disabled | ||
| + | [ 4.284694] mt6577-uart 11004000.serial: GPIO lookup for consumer rs485-term | ||
| + | [ 4.284720] mt6577-uart 11004000.serial: using device tree for GPIO lookup | ||
| + | [ 4.284752] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/serial@11004000[0]' | ||
| + | [ 4.284805] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/serial@11004000[0]' | ||
| + | [ 4.284848] mt6577-uart 11004000.serial: using lookup tables for GPIO lookup | ||
| + | [ 4.284871] mt6577-uart 11004000.serial: No GPIO consumer rs485-term found | ||
| + | [ 4.305102] 11004000.serial: ttyS0 at MMIO 0x11004000 (irq = 207, base_baud = 1625000) is a ST16650V2 | ||
| + | [ 5.571902] printk: console [ttyS0] enabled | ||
| + | [ 5.577265] mt6577-uart 11002000.serial: GPIO lookup for consumer rs485-term | ||
| + | [ 5.584343] mt6577-uart 11002000.serial: using device tree for GPIO lookup | ||
| + | [ 5.591291] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/serial@11002000[0]' | ||
| + | [ 5.601113] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/serial@11002000[0]' | ||
| + | [ 5.610811] mt6577-uart 11002000.serial: using lookup tables for GPIO lookup | ||
| + | [ 5.617884] mt6577-uart 11002000.serial: No GPIO consumer rs485-term found | ||
| + | [ 5.644912] 11002000.serial: ttyS1 at MMIO 0x11002000 (irq = 208, base_baud = 1625000) is a ST16650V2 | ||
| + | [ 5.655258] mt6577-uart 11003000.serial: GPIO lookup for consumer rs485-term | ||
| + | [ 5.662391] mt6577-uart 11003000.serial: using device tree for GPIO lookup | ||
| + | [ 5.669324] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/serial@11003000[0]' | ||
| + | [ 5.679118] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/serial@11003000[0]' | ||
| + | [ 5.688814] mt6577-uart 11003000.serial: using lookup tables for GPIO lookup | ||
| + | [ 5.695871] mt6577-uart 11003000.serial: No GPIO consumer rs485-term found | ||
| + | [ 5.722915] 11003000.serial: ttyS2 at MMIO 0x11003000 (irq = 209, base_baud = 1625000) is a ST16650V2 | ||
| + | [ 5.733576] mtk_rng 1020f000.rng: registered RNG driver | ||
| + | [ 5.733723] random: fast init done | ||
| + | [ 5.739904] platform 15004000.jpegdec: Adding to iommu group 0 | ||
| + | [ 5.742520] random: crng init done | ||
| + | [ 5.748361] platform 14007000.ovl: Adding to iommu group 1 | ||
| + | [ 5.757286] platform 14008000.rdma: Adding to iommu group 2 | ||
| + | [ 5.763006] platform 14009000.wdma: Adding to iommu group 3 | ||
| + | [ 5.768782] platform 14012000.rdma: Adding to iommu group 4 | ||
| + | [ 5.778204] [drm:drm_core_init] Initialized | ||
| + | [ 5.787985] mediatek-drm mediatek-drm.1.auto: Adding component match for /ovl@14007000 | ||
| + | [ 5.796039] mediatek-drm mediatek-drm.1.auto: Adding component match for /rdma@14008000 | ||
| + | [ 5.804268] mediatek-drm mediatek-drm.1.auto: Adding component match for /color@1400b000 | ||
| + | [ 5.812538] mediatek-drm mediatek-drm.1.auto: Adding component match for /rdma@14012000 | ||
| + | [ 5.820658] mediatek-drm mediatek-drm.1.auto: Adding component match for /dpi@14014000 | ||
| + | [ 5.831497] [drm] hdmi-audio-codec driver bound to HDMI | ||
| + | [ 5.845541] loop: module loaded | ||
| + | [ 5.848965] [WMT-DETECT][I]wmt_detect_driver_init:driver(major 154) installed success | ||
| + | [ 5.856882] [SDIO-DETECT][I]sdio_detect_init:sdio_register_driver() ret=0 | ||
| + | [ 5.863866] MTK-BTIF[E]hal_btif_clk_get_and_prepare(284):[CCF]clk_btif=c9901674 | ||
| + | [ 5.871244] MTK-BTIF[E]hal_btif_clk_get_and_prepare(290):[CCF]clk_btif_apdma=bcba51f7 | ||
| + | [ 5.881872] mt6323-regulator mt6323-regulator: Chip ID = 0x2023 | ||
| + | [ 5.899059] mdio_bus fixed-0: GPIO lookup for consumer reset | ||
| + | [ 5.904756] mdio_bus fixed-0: using lookup tables for GPIO lookup | ||
| + | [ 5.910915] mdio_bus fixed-0: No GPIO consumer reset found | ||
| + | [ 5.939647] of_get_named_gpiod_flags: can't parse 'link-gpios' property of node '/ethernet@1b100000/mac@0/fixed-link[0]' | ||
| + | [ 5.950606] of_get_named_gpiod_flags: can't parse 'link-gpio' property of node '/ethernet@1b100000/mac@0/fixed-link[0]' | ||
| + | [ 5.961498] of_get_named_gpiod_flags: can't parse 'link-gpios' property of node '/ethernet@1b100000/mac@1/fixed-link[0]' | ||
| + | [ 5.972426] of_get_named_gpiod_flags: can't parse 'link-gpio' property of node '/ethernet@1b100000/mac@1/fixed-link[0]' | ||
| + | [ 5.983977] mdio_bus mdio-bus: GPIO lookup for consumer reset | ||
| + | [ 5.989786] mdio_bus mdio-bus: using device tree for GPIO lookup | ||
| + | [ 5.995810] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ethernet@1b100000/mdio-bus[0]' | ||
| + | [ 6.006122] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ethernet@1b100000/mdio-bus[0]' | ||
| + | [ 6.016338] mdio_bus mdio-bus: using lookup tables for GPIO lookup | ||
| + | [ 6.022538] mdio_bus mdio-bus: No GPIO consumer reset found | ||
| + | [ 6.028931] mt7530 mdio-bus:00: GPIO lookup for consumer reset | ||
| + | [ 6.034787] mt7530 mdio-bus:00: using device tree for GPIO lookup | ||
| + | [ 6.040979] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/ethernet@1b100000/mdio-bus/switch@0[0]' - status (0) | ||
| + | [ 6.052812] gpio gpiochip0: Persistence not supported for GPIO 33 | ||
| + | [ 6.060364] mtk_soc_eth 1b100000.ethernet: generated random MAC address 46:60:51:82:42:4b | ||
| + | [ 6.069193] mtk_soc_eth 1b100000.ethernet eth0: mediatek frame engine at 0xe0ce0000, irq 226 | ||
| + | [ 6.077807] mtk_soc_eth 1b100000.ethernet: generated random MAC address 8a:89:42:c6:9a:c3 | ||
| + | [ 6.086448] mtk_soc_eth 1b100000.ethernet eth1: mediatek frame engine at 0xe0ce0000, irq 226 | ||
| + | [ 6.096999] xhci-mtk 1a1c0000.usb: xHCI Host Controller | ||
| + | [ 6.102283] xhci-mtk 1a1c0000.usb: new USB bus registered, assigned bus number 1 | ||
| + | [ 6.113592] xhci-mtk 1a1c0000.usb: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000290010 | ||
| + | [ 6.122819] xhci-mtk 1a1c0000.usb: irq 223, io mem 0x1a1c0000 | ||
| + | [ 6.129727] hub 1-0:1.0: USB hub found | ||
| + | [ 6.133566] hub 1-0:1.0: 1 port detected | ||
| + | [ 6.138048] xhci-mtk 1a1c0000.usb: xHCI Host Controller | ||
| + | [ 6.143305] xhci-mtk 1a1c0000.usb: new USB bus registered, assigned bus number 2 | ||
| + | [ 6.150764] xhci-mtk 1a1c0000.usb: Host supports USB 3.0 SuperSpeed | ||
| + | [ 6.157158] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. | ||
| + | [ 6.166053] hub 2-0:1.0: USB hub found | ||
| + | [ 6.170060] hub 2-0:1.0: 1 port detected | ||
| + | [ 6.175534] xhci-mtk 1a240000.usb: xHCI Host Controller | ||
| + | [ 6.180878] xhci-mtk 1a240000.usb: new USB bus registered, assigned bus number 3 | ||
| + | [ 6.192138] xhci-mtk 1a240000.usb: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000290010 | ||
| + | [ 6.201352] xhci-mtk 1a240000.usb: irq 224, io mem 0x1a240000 | ||
| + | [ 6.208242] hub 3-0:1.0: USB hub found | ||
| + | [ 6.212082] hub 3-0:1.0: 1 port detected | ||
| + | [ 6.216474] xhci-mtk 1a240000.usb: xHCI Host Controller | ||
| + | [ 6.221794] xhci-mtk 1a240000.usb: new USB bus registered, assigned bus number 4 | ||
| + | [ 6.229241] xhci-mtk 1a240000.usb: Host supports USB 3.0 SuperSpeed | ||
| + | [ 6.235624] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. | ||
| + | [ 6.244673] hub 4-0:1.0: USB hub found | ||
| + | [ 6.248553] hub 4-0:1.0: 1 port detected | ||
| + | [ 6.253352] usbcore: registered new interface driver usb-storage | ||
| + | [ 6.260450] usb-conn-gpio 11200000.usb:connector: GPIO lookup for consumer id | ||
| + | [ 6.267647] usb-conn-gpio 11200000.usb:connector: using device tree for GPIO lookup | ||
| + | [ 6.275341] of_get_named_gpiod_flags: parsed 'id-gpios' property of node '/usb@11200000/connector[0]' - status (0) | ||
| + | [ 6.285782] gpio gpiochip0: Persistence not supported for GPIO 44 | ||
| + | [ 6.291912] usb-conn-gpio 11200000.usb:connector: GPIO lookup for consumer vbus | ||
| + | [ 6.299252] usb-conn-gpio 11200000.usb:connector: using device tree for GPIO lookup | ||
| + | [ 6.306939] of_get_named_gpiod_flags: can't parse 'vbus-gpios' property of node '/usb@11200000/connector[0]' | ||
| + | [ 6.316827] of_get_named_gpiod_flags: can't parse 'vbus-gpio' property of node '/usb@11200000/connector[0]' | ||
| + | [ 6.326615] usb-conn-gpio 11200000.usb:connector: using lookup tables for GPIO lookup | ||
| + | [ 6.334456] usb-conn-gpio 11200000.usb:connector: No GPIO consumer vbus found | ||
| + | [ 6.341658] usb-conn-gpio 11200000.usb:connector: supply vbus not found, using dummy regulator | ||
| + | [ 6.351243] usb_phy_generic usb_phy_generic.3.auto: GPIO lookup for consumer reset | ||
| + | [ 6.358920] usb_phy_generic usb_phy_generic.3.auto: using lookup tables for GPIO lookup | ||
| + | [ 6.366976] usb_phy_generic usb_phy_generic.3.auto: No GPIO consumer reset found | ||
| + | [ 6.374385] usb_phy_generic usb_phy_generic.3.auto: GPIO lookup for consumer vbus-detect | ||
| + | [ 6.382498] usb_phy_generic usb_phy_generic.3.auto: using lookup tables for GPIO lookup | ||
| + | [ 6.390528] usb_phy_generic usb_phy_generic.3.auto: No GPIO consumer vbus-detect found | ||
| + | [ 6.398500] usb_phy_generic usb_phy_generic.3.auto: supply vcc not found, using dummy regulator | ||
| + | [ 6.407428] usb_phy_generic usb_phy_generic.3.auto: dummy supplies not allowed for exclusive requests | ||
| + | [ 6.417659] musb-hdrc musb-hdrc.4.auto: MUSB HDRC host driver | ||
| + | [ 6.423449] musb-hdrc musb-hdrc.4.auto: new USB bus registered, assigned bus number 5 | ||
| + | [ 6.432203] hub 5-0:1.0: USB hub found | ||
| + | [ 6.436028] hub 5-0:1.0: 1 port detected | ||
| + | [ 6.441734] mousedev: PS/2 mouse device common for all mice | ||
| + | [ 6.449132] mt6397-rtc mt6323-rtc: registered as rtc0 | ||
| + | [ 6.454257] mt6397-rtc mt6323-rtc: setting system clock to 2022-06-21T02:28:21 UTC (1655778501) | ||
| + | [ 6.465280] Registered IR keymap rc-empty | ||
| + | [ 6.469499] rc rc0: mtk_cir as /devices/platform/10013000.cir/rc/rc0 | ||
| + | [ 6.476263] rc rc0: lirc_dev: driver mtk_cir registered at minor = 0, raw IR receiver, no transmitter | ||
| + | [ 6.485706] input: mtk_cir as /devices/platform/10013000.cir/rc/rc0/input0 | ||
| + | [ 6.493122] mtk_cir 10013000.cir: Initialized MT7623 IR driver, sample period = 46us | ||
| + | [ 6.502026] mtk-jpeg 15004000.jpegdec: mtk-jpeg-dec device registered as /dev/video0 (81,0) | ||
| + | [ 6.511222] mtk-thermal 1100b000.thermal: Device not calibrated, using default calibration values | ||
| + | [ 6.521937] mtk-wdt 10007000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0) | ||
| + | [ 6.531087] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com | ||
| + | [ 6.540040] device-mapper: multipath round-robin: version 1.2.0 loaded | ||
| + | [ 6.546634] device-mapper: multipath queue-length: version 0.2.0 loaded | ||
| + | [ 6.553255] device-mapper: multipath service-time: version 0.3.0 loaded | ||
| + | [ 6.559946] device-mapper: raid: Loading target version 1.15.1 | ||
| + | [ 6.566404] cpu cpu0: dummy supplies not allowed for exclusive requests | ||
| + | [ 6.576147] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/blue[0]' - status (0) | ||
| + | [ 6.576237] mtk-msdc 11240000.mmc: GPIO lookup for consumer cd | ||
| + | [ 6.585260] gpio gpiochip0: Persistence not supported for GPIO 240 | ||
| + | [ 6.591092] mtk-msdc 11240000.mmc: using device tree for GPIO lookup | ||
| + | [ 6.597285] gpio-472 (?): no flags found for gpios | ||
| + | [ 6.603655] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/mmc@11240000[0]' - status (0) | ||
| + | [ 6.608591] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/green[0]' - status (0) | ||
| + | [ 6.609367] mtk-msdc 11230000.mmc: GPIO lookup for consumer wp | ||
| + | [ 6.609381] mtk-msdc 11230000.mmc: using device tree for GPIO lookup | ||
| + | [ 6.609396] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/mmc@11230000[0]' | ||
| + | [ 6.609423] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/mmc@11230000[0]' | ||
| + | [ 6.609445] mtk-msdc 11230000.mmc: using lookup tables for GPIO lookup | ||
| + | [ 6.609453] mtk-msdc 11230000.mmc: No GPIO consumer wp found | ||
| + | [ 6.617995] gpio gpiochip0: Persistence not supported for GPIO 261 | ||
| + | [ 6.627071] gpio gpiochip0: Persistence not supported for GPIO 241 | ||
| + | [ 6.632900] mtk-msdc 11240000.mmc: Got CD GPIO | ||
| + | [ 6.639253] gpio-473 (?): no flags found for gpios | ||
| + | [ 6.648056] mtk-msdc 11240000.mmc: GPIO lookup for consumer wp | ||
| + | [ 6.656921] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/red[0]' - status (0) | ||
| + | [ 6.663290] mtk-msdc 11240000.mmc: using device tree for GPIO lookup | ||
| + | [ 6.668990] gpio gpiochip0: Persistence not supported for GPIO 239 | ||
| + | [ 6.675155] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/mmc@11240000[0]' | ||
| + | [ 6.681352] gpio-471 (?): no flags found for gpios | ||
| + | [ 6.685803] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/mmc@11240000[0]' | ||
| + | [ 6.692630] hid: raw HID events driver (C) Jiri Kosina | ||
| + | [ 6.696438] mtk-msdc 11240000.mmc: using lookup tables for GPIO lookup | ||
| + | [ 6.705517] usbcore: registered new interface driver usbhid | ||
| + | [ 6.711721] mtk-msdc 11240000.mmc: No GPIO consumer wp found | ||
| + | [ 6.717914] usbhid: USB HID core driver | ||
| + | [ 6.719953] mtk-iommu-v1 10205000.mmsys_iommu: bound 14010000.larb (ops mtk_smi_larb_component_ops) | ||
| + | [ 6.776114] mtk-iommu-v1 10205000.mmsys_iommu: bound 16010000.larb (ops mtk_smi_larb_component_ops) | ||
| + | [ 6.785209] mtk-iommu-v1 10205000.mmsys_iommu: bound 15001000.larb (ops mtk_smi_larb_component_ops) | ||
| + | [ 6.798515] NET: Registered PF_INET6 protocol family | ||
| + | [ 6.805067] Segment Routing with IPv6 | ||
| + | [ 6.808887] In-situ OAM (IOAM) with IPv6 | ||
| + | [ 6.812904] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver | ||
| + | [ 6.819566] NET: Registered PF_PACKET protocol family | ||
| + | [ 6.825317] NET: Registered PF_KCM protocol family | ||
| + | [ 6.830383] 8021q: 802.1Q VLAN Support v1.8 | ||
| + | [ 6.834927] ThumbEE CPU extension supported. | ||
| + | [ 6.839250] Registering SWP/SWPB emulation handler | ||
| + | [ 6.844495] Loading compiled-in X.509 certificates | ||
| + | [ 6.861920] mmc0: host does not support reading read-only switch, assuming write-enable | ||
| + | [ 6.870526] mmc0: new SDHC card at address 0001 | ||
| + | [ 6.875975] mtk-pcie 1a140000.pcie: host bridge /pcie@1a140000 ranges: | ||
| + | [ 6.882627] mtk-pcie 1a140000.pcie: IO 0x001a160000..0x001a16ffff -> 0x001a160000 | ||
| + | [ 6.890700] mtk-pcie 1a140000.pcie: MEM 0x0060000000..0x006fffffff -> 0x0060000000 | ||
| + | [ 6.892105] mmc1: new high speed MMC card at address 0001 | ||
| + | [ 6.900303] mmcblk0: mmc0:0001 SD16G 14.6 GiB | ||
| + | [ 6.905500] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB | ||
| + | [ 6.916159] mmcblk0: p1 p2 | ||
| + | [ 6.916360] mmcblk1: p1 p2 p3 | ||
| + | [ 6.923541] mmcblk1boot0: mmc1:0001 8GTF4R 4.00 MiB | ||
| + | [ 6.931612] mmcblk1boot1: mmc1:0001 8GTF4R 4.00 MiB | ||
| + | [ 6.939075] mmcblk1rpmb: mmc1:0001 8GTF4R 512 KiB, chardev (242:0) | ||
| + | [ 6.948329] mtk-pcie 1a140000.pcie: PCI host bridge to bus 0000:00 | ||
| + | [ 6.954533] pci_bus 0000:00: root bus resource [bus 00-ff] | ||
| + | [ 6.960086] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0x1a160000-0x1a16ffff]) | ||
| + | [ 6.969602] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] | ||
| + | [ 6.976546] pci 0000:00:00.0: [14c3:0801] type 01 class 0x060400 | ||
| + | [ 6.982585] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff] | ||
| + | [ 6.988962] pci 0000:00:00.0: supports D1 | ||
| + | [ 6.992981] pci 0000:00:00.0: PME# supported from D0 D1 D3hot | ||
| + | [ 6.999212] pci 0000:00:01.0: [14c3:0801] type 01 class 0x060400 | ||
| + | [ 7.005260] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff] | ||
| + | [ 7.011639] pci 0000:00:01.0: supports D1 | ||
| + | [ 7.015659] pci 0000:00:01.0: PME# supported from D0 D1 D3hot | ||
| + | [ 7.024286] PCI: bus0: Fast back to back transfers disabled | ||
| + | [ 7.029929] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring | ||
| + | [ 7.037994] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring | ||
| + | [ 7.046221] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000 | ||
| + | [ 7.052301] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0007ffff 64bit] | ||
| + | [ 7.059161] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] | ||
| + | [ 7.065983] pci 0000:01:00.0: supports D1 | ||
| + | [ 7.070021] pci 0000:01:00.0: PME# supported from D0 D1 D3hot | ||
| + | [ 7.099260] PCI: bus1: Fast back to back transfers disabled | ||
| + | [ 7.104861] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 | ||
| + | [ 7.111770] pci 0000:02:00.0: [1b21:0611] type 00 class 0x010185 | ||
| + | [ 7.117849] pci 0000:02:00.0: reg 0x10: initial BAR value 0x00000000 invalid | ||
| + | [ 7.124909] pci 0000:02:00.0: reg 0x10: [io size 0x0008] | ||
| + | [ 7.130341] pci 0000:02:00.0: reg 0x14: initial BAR value 0x00000000 invalid | ||
| + | [ 7.137413] pci 0000:02:00.0: reg 0x14: [io size 0x0004] | ||
| + | [ 7.142827] pci 0000:02:00.0: reg 0x18: initial BAR value 0x00000000 invalid | ||
| + | [ 7.149895] pci 0000:02:00.0: reg 0x18: [io size 0x0008] | ||
| + | [ 7.155310] pci 0000:02:00.0: reg 0x1c: initial BAR value 0x00000000 invalid | ||
| + | [ 7.162381] pci 0000:02:00.0: reg 0x1c: [io size 0x0004] | ||
| + | [ 7.167811] pci 0000:02:00.0: reg 0x20: initial BAR value 0x00000000 invalid | ||
| + | [ 7.174867] pci 0000:02:00.0: reg 0x20: [io size 0x0010] | ||
| + | [ 7.180294] pci 0000:02:00.0: reg 0x24: [mem 0x00000000-0x000001ff] | ||
| + | [ 7.186591] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] | ||
| + | [ 7.219254] PCI: bus2: Fast back to back transfers disabled | ||
| + | [ 7.224856] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 | ||
| + | [ 7.231568] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] | ||
| + | [ 7.238393] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref] | ||
| + | [ 7.245632] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff] | ||
| + | [ 7.252445] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref] | ||
| + | [ 7.259696] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff] | ||
| + | [ 7.266499] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff] | ||
| + | [ 7.273314] pci 0000:00:01.0: BAR 7: assigned [io 0x1000-0x1fff] | ||
| + | [ 7.279441] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x6007ffff 64bit] | ||
| + | [ 7.286793] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref] | ||
| + | [ 7.294031] pci 0000:00:00.0: PCI bridge to [bus 01] | ||
| + | [ 7.299018] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] | ||
| + | [ 7.305817] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref] | ||
| + | [ 7.313071] pci 0000:02:00.0: BAR 6: assigned [mem 0x60300000-0x6030ffff pref] | ||
| + | [ 7.320323] pci 0000:02:00.0: BAR 5: assigned [mem 0x60200000-0x602001ff] | ||
| + | [ 7.327150] pci 0000:02:00.0: BAR 4: assigned [io 0x1000-0x100f] | ||
| + | [ 7.333256] pci 0000:02:00.0: BAR 0: assigned [io 0x1010-0x1017] | ||
| + | [ 7.339387] pci 0000:02:00.0: BAR 2: assigned [io 0x1018-0x101f] | ||
| + | [ 7.345498] pci 0000:02:00.0: BAR 1: assigned [io 0x1020-0x1023] | ||
| + | [ 7.351622] pci 0000:02:00.0: BAR 3: assigned [io 0x1024-0x1027] | ||
| + | [ 7.357744] pci 0000:00:01.0: PCI bridge to [bus 02] | ||
| + | [ 7.362716] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] | ||
| + | [ 7.368831] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff] | ||
| + | [ 7.375629] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff pref] | ||
| + | [ 7.383102] pcieport 0000:00:00.0: enabling device (0140 -> 0142) | ||
| + | [ 7.389490] pcieport 0000:00:00.0: PME: Signaling with IRQ 259 | ||
| + | [ 7.395683] pcieport 0000:00:01.0: enabling device (0140 -> 0143) | ||
| + | [ 7.402023] pcieport 0000:00:01.0: PME: Signaling with IRQ 253 | ||
| + | [ 7.408339] ahci 0000:02:00.0: version 3.0 | ||
| + | [ 7.412465] ahci 0000:02:00.0: enabling device (0140 -> 0143) | ||
| + | [ 7.418378] ahci 0000:02:00.0: SSS flag set, parallel bus scan disabled | ||
| + | [ 7.425051] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl IDE mode | ||
| + | [ 7.433105] ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs | ||
| + | [ 7.443590] scsi host0: ahci | ||
| + | [ 7.447315] scsi host1: ahci | ||
| + | [ 7.450514] ata1: SATA max UDMA/133 abar m512@0x60200000 port 0x60200100 irq 253 | ||
| + | [ 7.458002] ata2: SATA max UDMA/133 abar m512@0x60200000 port 0x60200180 irq 253 | ||
| + | [ 7.465988] mediatek-dpi 14014000.dpi: Found bridge node: /hdmi@14015000 | ||
| + | [ 7.473044] mediatek-drm mediatek-drm.1.auto: bound 14007000.ovl (ops mtk_disp_ovl_component_ops) | ||
| + | [ 7.482005] mediatek-drm mediatek-drm.1.auto: bound 14008000.rdma (ops mtk_disp_rdma_component_ops) | ||
| + | [ 7.491096] mediatek-drm mediatek-drm.1.auto: bound 1400b000.color (ops mtk_disp_color_component_ops) | ||
| + | [ 7.500352] mediatek-drm mediatek-drm.1.auto: bound 14012000.rdma (ops mtk_disp_rdma_component_ops) | ||
| + | [ 7.509467] [drm:drm_connector_init] cmdline mode for connector HDMI-A-1 1920x1080@60Hz | ||
| + | [ 7.517607] mediatek-drm mediatek-drm.1.auto: bound 14014000.dpi (ops mtk_dpi_component_ops) | ||
| + | [ 7.526141] mediatek-drm mediatek-drm.1.auto: Not creating crtc 1 because component 9 is disabled or missing | ||
| + | [ 7.536444] [drm:drm_minor_register] | ||
| + | [ 7.540173] [drm:drm_minor_register] | ||
| + | [ 7.544208] [drm:drm_minor_register] new minor registered 0 | ||
| + | [ 7.549986] [drm:drm_sysfs_connector_add] adding "HDMI-A-1" to sysfs | ||
| + | [ 7.556398] [drm:drm_sysfs_hotplug_event] generating hotplug event | ||
| + | [ 7.562630] [drm] Initialized mediatek 1.0.0 20150513 for mediatek-drm.1.auto on minor 0 | ||
| + | [ 7.570761] [drm:drm_client_modeset_probe] | ||
| + | [ 7.574959] [drm:drm_mode_object_get] OBJ ID: 32 (2) | ||
| + | [ 7.579962] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1] | ||
| + | [ 7.587483] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1] status updated from unknown to disconnected | ||
| + | [ 7.598833] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1] disconnected | ||
| + | [ 7.607487] [drm:drm_client_modeset_probe] No connectors reported connected with modes | ||
| + | [ 7.615417] [drm:drm_client_modeset_probe] connector 32 enabled? no | ||
| + | [ 7.621714] [drm:drm_client_firmware_config.constprop.0] Not using firmware configuration | ||
| + | [ 7.629922] [drm:drm_client_modeset_probe] picking CRTCs for 4096x4096 config | ||
| + | [ 7.637087] [drm:drm_mode_object_put.part.0] OBJ ID: 32 (2) | ||
| + | [ 7.642679] mediatek-drm mediatek-drm.1.auto: [drm:drm_fb_helper_single_fb_probe] test CRTC 0 primary plane | ||
| + | [ 7.652456] mediatek-drm mediatek-drm.1.auto: [drm] Cannot find any crtc or sizes | ||
| + | [ 7.660618] mt7530 mdio-bus:00: GPIO lookup for consumer reset | ||
| + | [ 7.666477] mt7530 mdio-bus:00: using device tree for GPIO lookup | ||
| + | [ 7.672632] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/ethernet@1b100000/mdio-bus/switch@0[0]' - status (0) | ||
| + | [ 7.684460] gpio gpiochip0: Persistence not supported for GPIO 33 | ||
| + | [ 7.690667] [drm:drm_sysfs_hotplug_event] generating hotplug event | ||
| + | [ 7.696968] [drm:drm_client_modeset_probe] | ||
| + | [ 7.701182] [drm:drm_mode_object_get] OBJ ID: 32 (2) | ||
| + | [ 7.706175] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1] | ||
| + | [ 7.713706] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1] disconnected | ||
| + | [ 7.722361] [drm:drm_client_modeset_probe] No connectors reported connected with modes | ||
| + | [ 7.730306] [drm:drm_client_modeset_probe] connector 32 enabled? no | ||
| + | [ 7.736610] [drm:drm_client_firmware_config.constprop.0] Not using firmware configuration | ||
| + | [ 7.744808] [drm:drm_client_modeset_probe] picking CRTCs for 4096x4096 config | ||
| + | [ 7.751972] [drm:drm_mode_object_put.part.0] OBJ ID: 32 (2) | ||
| + | [ 7.757585] mediatek-drm mediatek-drm.1.auto: [drm:drm_fb_helper_single_fb_probe] test CRTC 0 primary plane | ||
| + | [ 7.762084] mt7530 mdio-bus:00: no interrupt support | ||
| + | [ 7.767377] mediatek-drm mediatek-drm.1.auto: [drm] Cannot find any crtc or sizes | ||
| + | [ 7.772766] mdio_bus mt7530-0: GPIO lookup for consumer reset | ||
| + | [ 7.779841] mediatek-drm mediatek-drm.1.auto: [drm:drm_client_dev_hotplug] fbdev: ret=0 | ||
| + | [ 7.785586] mdio_bus mt7530-0: using lookup tables for GPIO lookup | ||
| + | [ 7.799832] mdio_bus mt7530-0: No GPIO consumer reset found | ||
| + | [ 7.806002] mdio_bus mt7530-0:00: GPIO lookup for consumer reset | ||
| + | [ 7.812067] mdio_bus mt7530-0:00: using lookup tables for GPIO lookup | ||
| + | [ 7.818534] mdio_bus mt7530-0:00: No GPIO consumer reset found | ||
| + | [ 7.825149] mdio_bus mt7530-0:01: GPIO lookup for consumer reset | ||
| + | [ 7.831222] mdio_bus mt7530-0:01: using lookup tables for GPIO lookup | ||
| + | [ 7.837694] mdio_bus mt7530-0:01: No GPIO consumer reset found | ||
| + | [ 7.844286] mdio_bus mt7530-0:02: GPIO lookup for consumer reset | ||
| + | [ 7.850363] mdio_bus mt7530-0:02: using lookup tables for GPIO lookup | ||
| + | [ 7.856836] mdio_bus mt7530-0:02: No GPIO consumer reset found | ||
| + | [ 7.863445] mdio_bus mt7530-0:03: GPIO lookup for consumer reset | ||
| + | [ 7.869511] mdio_bus mt7530-0:03: using lookup tables for GPIO lookup | ||
| + | [ 7.875965] mdio_bus mt7530-0:03: No GPIO consumer reset found | ||
| + | [ 7.882580] mdio_bus mt7530-0:04: GPIO lookup for consumer reset | ||
| + | [ 7.888647] mdio_bus mt7530-0:04: using lookup tables for GPIO lookup | ||
| + | [ 7.895099] mdio_bus mt7530-0:04: No GPIO consumer reset found | ||
| + | [ 7.901678] mdio_bus mt7530-0:05: GPIO lookup for consumer reset | ||
| + | [ 7.907742] mdio_bus mt7530-0:05: using lookup tables for GPIO lookup | ||
| + | [ 7.914195] mdio_bus mt7530-0:05: No GPIO consumer reset found | ||
| + | [ 7.921436] mt7530 mdio-bus:00 wan (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7530 PHY] (irq=POLL) | ||
| + | [ 7.933132] mt7530 mdio-bus:00 lan0 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7530 PHY] (irq=POLL) | ||
| + | [ 7.944897] mt7530 mdio-bus:00 lan1 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7530 PHY] (irq=POLL) | ||
| + | [ 7.956672] mt7530 mdio-bus:00 lan2 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7530 PHY] (irq=POLL) | ||
| + | [ 7.966602] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) | ||
| + | [ 7.968401] mt7530 mdio-bus:00 lan3 (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7530 PHY] (irq=POLL) | ||
| + | [ 7.974521] ata1.00: ATA-10: Patriot P210 256GB, U0506A0, max UDMA/133 | ||
| + | [ 7.983849] of_get_named_gpiod_flags: can't parse 'link-gpios' property of node '/ethernet@1b100000/mdio-bus/switch@0/ports/port@5/fixed-link[0]' | ||
| + | [ 7.990032] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA | ||
| + | [ 8.002560] of_get_named_gpiod_flags: can't parse 'link-gpio' property of node '/ethernet@1b100000/mdio-bus/switch@0/ports/port@5/fixed-link[0]' | ||
| + | [ 8.012865] ata1.00: configured for UDMA/133 | ||
| + | [ 8.023309] of_get_named_gpiod_flags: can't parse 'link-gpios' property of node '/ethernet@1b100000/mdio-bus/switch@0/ports/port@6/fixed-link[0]' | ||
| + | [ 8.027100] scsi 0:0:0:0: Direct-Access ATA Patriot P210 256 6A0 PQ: 0 ANSI: 5 | ||
| + | [ 8.039712] of_get_named_gpiod_flags: can't parse 'link-gpio' property of node '/ethernet@1b100000/mdio-bus/switch@0/ports/port@6/fixed-link[0]' | ||
| + | [ 8.049317] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) | ||
| + | [ 8.061404] mt7530 mdio-bus:00: configuring for fixed/trgmii link mode | ||
| + | [ 8.068470] sd 0:0:0:0: [sda] Write Protect is off | ||
| + | [ 8.077529] DSA: tree 0 setup | ||
| + | [ 8.079712] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 | ||
| + | [ 8.083009] usb-conn-gpio 11200000.usb:connector: GPIO lookup for consumer id | ||
| + | [ 8.087917] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | ||
| + | [ 8.094863] usb-conn-gpio 11200000.usb:connector: using device tree for GPIO lookup | ||
| + | [ 8.108033] sda: sda1 | ||
| + | [ 8.111647] of_get_named_gpiod_flags: parsed 'id-gpios' property of node '/usb@11200000/connector[0]' - status (0) | ||
| + | [ 8.115163] sd 0:0:0:0: [sda] Attached SCSI disk | ||
| + | [ 8.124373] gpio gpiochip0: Persistence not supported for GPIO 44 | ||
| + | [ 8.135092] usb-conn-gpio 11200000.usb:connector: GPIO lookup for consumer vbus | ||
| + | [ 8.142430] usb-conn-gpio 11200000.usb:connector: using device tree for GPIO lookup | ||
| + | [ 8.150121] of_get_named_gpiod_flags: can't parse 'vbus-gpios' property of node '/usb@11200000/connector[0]' | ||
| + | [ 8.159999] of_get_named_gpiod_flags: can't parse 'vbus-gpio' property of node '/usb@11200000/connector[0]' | ||
| + | [ 8.169792] usb-conn-gpio 11200000.usb:connector: using lookup tables for GPIO lookup | ||
| + | [ 8.177646] usb-conn-gpio 11200000.usb:connector: No GPIO consumer vbus found | ||
| + | [ 8.184833] usb-conn-gpio 11200000.usb:connector: supply vbus not found, using dummy regulator | ||
| + | [ 8.194327] mt7530 mdio-bus:00: Link is Up - 1Gbps/Full - flow control rx/tx | ||
| + | [ 8.202987] ALSA device list: | ||
| + | [ 8.205984] No soundcards found. | ||
| + | [ 8.398023] ata2: SATA link down (SStatus 0 SControl 300) | ||
| + | [ 8.403533] md: Waiting for all devices to be available before autodetect | ||
| + | [ 8.410371] md: If you don't use raid, use raid=noautodetect | ||
| + | [ 8.416038] md: Autodetecting RAID arrays. | ||
| + | [ 8.420155] md: autorun ... | ||
| + | [ 8.422950] md: ... autorun DONE. | ||
| + | [ 8.443819] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem | ||
| + | [ 8.451205] EXT4-fs (mmcblk0p2): write access will be enabled during recovery | ||
| + | [ 8.865469] EXT4-fs (mmcblk0p2): recovery complete | ||
| + | [ 8.892072] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. | ||
| + | [ 8.902329] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. | ||
| + | [ 8.924905] devtmpfs: mounted | ||
| + | [ 8.934481] Freeing unused kernel image (initmem) memory: 1024K | ||
| + | [ 8.940780] Run /sbin/init as init process | ||
| + | [ 8.944889] with arguments: | ||
| + | [ 8.947886] /sbin/init | ||
| + | [ 8.950598] with environment: | ||
| + | [ 8.953738] HOME=/ | ||
| + | [ 8.956098] TERM=linux | ||
| + | [ 8.958839] board=bpi-r2 | ||
| + | [ 10.998089] systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) | ||
| + | [ 11.024943] systemd[1]: Detected architecture arm. | ||
| + | [ 11.062648] systemd[1]: Set hostname to <bpi-r2>. | ||
| + | [ 11.916132] systemd[1]: /etc/systemd/system/rc-local.service:11: Support for option SysVStartPriority= has been removed and it is ignored | ||
| + | [ 12.000753] systemd[1]: Queued start job for default target Graphical Interface. | ||
| + | [ 12.013361] systemd[1]: Created slice system-getty.slice. | ||
| + | [ 12.021414] systemd[1]: Created slice system-modprobe.slice. | ||
| + | [ 12.029554] systemd[1]: Created slice system-serial\x2dgetty.slice. | ||
| + | [ 12.038062] systemd[1]: Created slice User and Session Slice. | ||
| + | [ 12.044732] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | ||
| + | [ 12.053650] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | ||
| + | [ 12.061973] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. | ||
| + | [ 12.074083] systemd[1]: Reached target Local Encrypted Volumes. | ||
| + | [ 12.080937] systemd[1]: Reached target Paths. | ||
| + | [ 12.085785] systemd[1]: Reached target Remote File Systems. | ||
| + | [ 12.091891] systemd[1]: Reached target Slices. | ||
| + | [ 12.096903] systemd[1]: Reached target Swap. | ||
| + | [ 12.104208] systemd[1]: Listening on Syslog Socket. | ||
| + | [ 12.110460] systemd[1]: Listening on fsck to fsckd communication Socket. | ||
| + | [ 12.118126] systemd[1]: Listening on initctl Compatibility Named Pipe. | ||
| + | [ 12.136063] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. | ||
| + | [ 12.145194] systemd[1]: Listening on Journal Socket (/dev/log). | ||
| + | [ 12.152542] systemd[1]: Listening on Journal Socket. | ||
| + | [ 12.159208] systemd[1]: Listening on Network Service Netlink Socket. | ||
| + | [ 12.168308] systemd[1]: Listening on udev Control Socket. | ||
| + | [ 12.174890] systemd[1]: Listening on udev Kernel Socket. | ||
| + | [ 12.181730] systemd[1]: Condition check resulted in Huge Pages File System being skipped. | ||
| + | [ 12.194924] systemd[1]: Mounting POSIX Message Queue File System... | ||
| + | [ 12.207731] systemd[1]: Mounting Kernel Debug File System... | ||
| + | [ 12.219683] systemd[1]: Mounting Kernel Trace File System... | ||
| + | [ 12.232597] systemd[1]: Starting Create list of static device nodes for the current kernel... | ||
| + | [ 12.248104] systemd[1]: Starting Load Kernel Module configfs... | ||
| + | [ 12.260817] systemd[1]: Starting Load Kernel Module drm... | ||
| + | [ 12.273094] systemd[1]: Starting Load Kernel Module fuse... | ||
| + | [ 12.287034] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. | ||
| + | [ 12.301440] systemd[1]: Starting File System Check on Root Device... | ||
| + | [ 12.318971] systemd[1]: Starting Journal Service... | ||
| + | [ 12.452755] systemd[1]: Starting Load Kernel Modules... | ||
| + | [ 12.464081] systemd[1]: Starting Coldplug All udev Devices... | ||
| + | [ 12.480161] systemd[1]: Mounted POSIX Message Queue File System. | ||
| + | [ 12.487463] systemd[1]: Mounted Kernel Debug File System. | ||
| + | [ 12.493991] systemd[1]: Mounted Kernel Trace File System. | ||
| + | [ 12.502257] systemd[1]: Finished Create list of static device nodes for the current kernel. | ||
| + | [ 12.517835] fuse: init (API version 7.34) | ||
| + | [ 12.551940] systemd[1]: modprobe@configfs.service: Succeeded. | ||
| + | [ 12.560077] systemd[1]: Finished Load Kernel Module configfs. | ||
| + | [ 12.567947] systemd[1]: modprobe@drm.service: Succeeded. | ||
| + | [ 12.575354] systemd[1]: Finished Load Kernel Module drm. | ||
| + | [ 12.583186] systemd[1]: modprobe@fuse.service: Succeeded. | ||
| + | [ 12.590523] systemd[1]: Finished Load Kernel Module fuse. | ||
| + | [ 12.598773] systemd[1]: Finished Load Kernel Modules. | ||
| + | [ 12.610707] systemd[1]: Mounting FUSE Control File System... | ||
| + | [ 12.623205] systemd[1]: Mounting Kernel Configuration File System... | ||
| + | [ 12.635660] systemd[1]: Started File System Check Daemon to report status. | ||
| + | [ 12.650104] systemd[1]: Starting Apply Kernel Variables... | ||
| + | [ 12.661737] systemd[1]: Mounted FUSE Control File System. | ||
| + | [ 12.669295] systemd[1]: Mounted Kernel Configuration File System. | ||
| + | [ 12.704528] systemd[1]: Finished File System Check on Root Device. | ||
| + | [ 12.720410] systemd[1]: Starting Remount Root and Kernel File Systems... | ||
| + | [ 12.733109] systemd[1]: Finished Apply Kernel Variables. | ||
| + | [ 12.791304] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro. Quota mode: disabled. | ||
| + | [ 12.810326] systemd[1]: Finished Remount Root and Kernel File Systems. | ||
| + | [ 12.823173] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. | ||
| + | [ 12.832814] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. | ||
| + | [ 12.847656] systemd[1]: Starting Load/Save Random Seed... | ||
| + | [ 12.860959] systemd[1]: Starting Create System Users... | ||
| + | [ 13.005524] systemd[1]: Finished Load/Save Random Seed. | ||
| + | [ 13.014029] systemd[1]: Finished Create System Users. | ||
| + | [ 13.020687] systemd[1]: Condition check resulted in First Boot Complete being skipped. | ||
| + | [ 13.034672] systemd[1]: Starting Create Static Device Nodes in /dev... | ||
| + | [ 13.076259] systemd[1]: Started Journal Service. | ||
| + | [ 13.150215] systemd-journald[161]: Received client request to flush runtime journal. | ||
| + | [ 13.268600] systemd-journald[161]: File /var/log/journal/f4098fb7f96e464faa6efc47a185409f/system.journal corrupted or uncleanly shut down, renaming and replacing. | ||
| + | [ 14.413364] input: mtk-pmic-keys as /devices/platform/1000d000.pwrap/1000d000.pwrap:mt6323/mtk-pmic-keys/input/input1 | ||
| + | [ 14.969381] lima 13040000.gpu: mmu gpmmu dte write test fail | ||
| + | [ 14.975224] lima: probe of 13040000.gpu failed with error -5 | ||
| + | [ 16.121548] SPI driver spidev has no spi_device_id for linux,spidev | ||
| + | [ 16.122061] cfg80211: Loading compiled-in X.509 certificates for regulatory database | ||
| + | [ 16.170872] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | ||
| + | [ 16.193074] lanbr0: port 1(lan3) entered blocking state | ||
| + | [ 16.198403] lanbr0: port 1(lan3) entered disabled state | ||
| + | [ 16.208952] device lan3 entered promiscuous mode | ||
| + | [ 16.213114] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid | ||
| + | [ 16.219404] lanbr0: port 2(lan2) entered blocking state | ||
| + | [ 16.226964] lanbr0: port 2(lan2) entered disabled state | ||
| + | [ 16.234191] device lan2 entered promiscuous mode | ||
| + | [ 16.245997] lanbr0: port 3(lan1) entered blocking state | ||
| + | [ 16.251364] lanbr0: port 3(lan1) entered disabled state | ||
| + | [ 16.261567] device lan1 entered promiscuous mode | ||
| + | [ 16.270851] lanbr0: port 4(lan0) entered blocking state | ||
| + | [ 16.276124] lanbr0: port 4(lan0) entered disabled state | ||
| + | [ 16.282954] device lan0 entered promiscuous mode | ||
| + | [ 16.293951] mtk_soc_eth 1b100000.ethernet eth0: configuring for fixed/trgmii link mode | ||
| + | [ 16.302080] device eth0 entered promiscuous mode | ||
| + | [ 16.307136] mtk_soc_eth 1b100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx | ||
| + | [ 16.315644] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | ||
| + | [ 16.326239] mt7530 mdio-bus:00 lan3: configuring for phy/gmii link mode | ||
| + | [ 16.334958] mt7530 mdio-bus:00 lan2: configuring for phy/gmii link mode | ||
| + | [ 16.343762] mt7530 mdio-bus:00 lan1: configuring for phy/gmii link mode | ||
| + | [ 16.354611] mt7530 mdio-bus:00 lan0: configuring for phy/gmii link mode | ||
| + | [ 18.051096] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | ||
| + | [ 19.481662] ath9k 0000:01:00.0: enabling device (0140 -> 0142) | ||
| + | [ 19.497104] ath: EEPROM regdomain: 0x6a | ||
| + | [ 19.500974] ath: EEPROM indicates we should expect a direct regpair map | ||
| + | [ 19.507637] ath: Country alpha2 being used: 00 | ||
| + | [ 19.512096] ath: Regpair used: 0x6a | ||
| + | [ 19.520331] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' | ||
| + | [ 19.529415] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xe1000000, irq=259 | ||
| + | [ 19.599520] ath9k 0000:01:00.0 wlp1s0: renamed from wlan0 | ||
| + | [ 20.276360] Mass Storage Function, version: 2009/09/11 | ||
| + | [ 20.281632] LUN: removable file: (no medium) | ||
| + | [ 20.364219] using random self ethernet address | ||
| + | [ 20.368790] using random host ethernet address | ||
| + | [ 20.469089] usb0: HOST MAC 48:6f:73:74:50:43 | ||
| + | [ 20.473432] usb0: MAC 42:61:64:55:53:42 | ||
| + | [ 20.842009] mt7530 mdio-bus:00 wan: configuring for phy/gmii link mode | ||
| + | [ 23.957322] mt7530 mdio-bus:00 wan: Link is Up - 1Gbps/Full - flow control rx/tx | ||
| + | [ 23.964785] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready | ||
| + | [ 38.276587] vdd_fixed_vgpu: disabling | ||
| + | [ 38.280310] vusb: disabling | ||
| + | [ 38.283116] vmc: disabling | ||
| + | [ 38.285829] vmch: disabling | ||
| + | [ 38.288676] vgp1: disabling | ||
| + | [ 38.291510] vcamaf: disabling | ||
| + | |||
| + | </pre> | ||
| + | |||
| + | == OpenWrt Attempt == | ||
| + | |||
| + | === Extracing dtb === | ||
| + | |||
| + | <pre> | ||
| + | dumpimage -T flat_dt -p 1 -o /tmp/bpir2.dtb /home/lth/openwrt-bpir2/bin/targets/ | ||
| + | mediatek/mt7623/lifeline-0.0.67-dev-mediatek-mt7623-bananapi_bpi-r2-squashfs-sys | ||
| + | upgrade.itb | ||
| + | </pre> | ||
| + | |||
| + | <pre> | ||
| + | dtc -I dtb -O dts bpir2.dtb -o bpir2.dts | ||
| + | </pre> | ||
| + | |||
| + | === Devices === | ||
<pre> | <pre> | ||
| Line 227: | Line 946: | ||
drwxr-xr-x 3 root root 0 Jan 1 1970 timer | drwxr-xr-x 3 root root 0 Jan 1 1970 timer | ||
-rw-r--r-- 1 root root 4096 Jun 9 14:35 uevent | -rw-r--r-- 1 root root 4096 Jun 9 14:35 uevent | ||
| + | </pre> | ||
| + | |||
| + | After tweaks: | ||
| + | |||
| + | <pre> | ||
| + | root@llcon:/sys/devices# ls -ls platform/ | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 10000000.syscon | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 10001000.syscon | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 10003000.syscon | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 10005000.syscfg | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 10006000.power-controller | ||
| + | 0 drwxr-xr-x 5 root root 0 Jan 1 1970 10007000.watchdog | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 10008000.timer | ||
| + | 0 drwxr-xr-x 5 root root 0 Jan 1 1970 1000b000.pinctrl | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 1000c000.smi | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 1000d000.pwrap | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 10010000.dsi-phy | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 10012000.cec | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 10013000.cir | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 10205000.mmsys_iommu | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 10206000.efuse | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 10209000.syscon | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 10209100.hdmi-phy | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 1020f000.rng | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 11001000.adc | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 11002000.serial | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 11003000.serial | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 11004000.serial | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 11006000.pwm | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 11007000.i2c | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 11008000.i2c | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 1100a000.spi | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 1100b000.thermal | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 1100c000.serial | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 11013000.i2c | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 11200000.usb | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 11210000.t-phy | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 11220000.clock-controller | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 11230000.mmc | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 11240000.mmc | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 13000000.syscon | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 13040000.gpu | ||
| + | 0 drwxr-xr-x 5 root root 0 Jan 1 1970 14000000.syscon | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 14007000.ovl | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 14008000.rdma | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 14009000.wdma | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 1400a000.pwm | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 1400b000.color | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 1400e000.mutex | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 14010000.larb | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 14012000.rdma | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 14014000.dpi | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 14015000.hdmi | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 15000000.syscon | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 15001000.larb | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 15004000.jpegdec | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 16000000.syscon | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 16010000.larb | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 1a000000.syscon | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 1a140000.pcie | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 1a149000.t-phy | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 1a14a000.t-phy | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 1a1c0000.usb | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 1a1c4000.t-phy | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 1a240000.usb | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 1a244000.t-phy | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 1b000000.syscon | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 1b007000.dma-controller | ||
| + | 0 drwxr-xr-x 5 root root 0 Jan 1 1970 1b100000.ethernet | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 1b240000.crypto | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 1c000000.syscon | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 Fixed MDIO bus.0 | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 connector | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 fixedregulator@0 | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 gpio-keys | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 leds | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 mtk-cpufreq | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 pmu | ||
| + | 0 drwxr-xr-x 2 root root 0 Jun 15 15:16 power | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 reg-dummy | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 regulator-1p8v | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 regulator-3p3v | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 regulator-5v | ||
| + | 0 drwxr-xr-x 3 root root 0 Jun 15 15:16 regulatory.0 | ||
| + | 0 drwxr-xr-x 4 root root 0 Jan 1 1970 serial8250 | ||
| + | 0 drwxr-xr-x 3 root root 0 Jan 1 1970 timer | ||
| + | 0 -rw-r--r-- 1 root root 4096 Jun 15 15:16 uevent | ||
</pre> | </pre> | ||
| Line 278: | Line 1,084: | ||
Loadables: rootfs-1 | Loadables: rootfs-1 | ||
</pre> | </pre> | ||
| + | |||
| + | == Issue == | ||
| + | |||
| + | <pre> | ||
| + | /consys@18070000:power-domains: cell 0 is not a phandle reference | ||
| + | arch/arm/boot/dts/mt7623.dtsi:759.26-777.4: Warning (power_domains_property): /consys@18070000: Missing property '#power-domain-cells' in node /pinctrl@10005000/spi1-default or bad phandle (referred from power-domains[0]) | ||
| + | arch/arm/boot/dts/mt7623.dtsi:766.3-24: Warning (resets_property): /consys@18070000:resets: cell 0 is not a phandle reference | ||
| + | arch/arm/boot/dts/mt7623.dtsi:759.26-777.4: Warning (resets_property): /consys@18070000: Missing property '#reset-cells' in node /t-phy@1a149000/pcie-phy@1a149900 or bad phandle (referred from resets[0]) | ||
| + | arch/arm/boot/dts/mt7623.dtsi:610.25-53: Warning (gpios_property): /usb@11200000/connector:id-gpios: cell 0 is not a phandle reference | ||
| + | DTC arch/arm/boot/dts/mt7623a-rfb-nand.dtb | ||
| + | arch/arm/boot/dts/mt7623.dtsi:762.3-24: Warning (clocks_property): /consys@18070000:clocks: cell 0 is not a phandle reference | ||
| + | arch/arm/boot/dts/mt7623.dtsi:764.3-31: Warning (power_domains_property): /consys@18070000:power-domains: cell 0 is not a phandle reference | ||
| + | arch/arm/boot/dts/mt7623.dtsi:759.26-777.4: Warning (power_domains_property): /consys@18070000: Missing property '#power-domain-cells' in node /pinctrl@10005000/nanddefault or bad phandle (referred from power-domains[0]) | ||
| + | arch/arm/boot/dts/mt7623.dtsi:766.3-24: Warning (resets_property): /consys@18070000:resets: cell 0 is not a phandle reference | ||
| + | arch/arm/boot/dts/mt7623.dtsi:759.26-777.4: Warning (resets_property): /consys@18070000: Missing property '#reset-cells' in node /t-phy@1a244000/usb-phy@1a244900 or bad phandle (referred from resets[0]) | ||
| + | arch/arm/boot/dts/mt7623.dtsi:610.25-53: Warning (gpios_property): /usb@11200000/connector:id-gpios: cell 0 is not a phandle reference | ||
| + | DTC arch/arm/boot/dts/mt7623n-rfb-emmc.dtb | ||
| + | arch/arm/boot/dts/mt7623.dtsi:762.3-24: Warning (clocks_property): /consys@18070000:clocks: cell 0 is not a phandle reference | ||
| + | arch/arm/boot/dts/mt7623.dtsi:764.3-31: Warning (power_domains_property): /consys@18070000:power-domains: cell 0 is not a phandle reference | ||
| + | arch/arm/boot/dts/mt7623.dtsi:759.26-777.4: Warning (power_domains_property): /consys@18070000: Missing property '#power-domain-cells' in node /efuse@10206000/calib@424 or bad phandle (referred from power-domains[0]) | ||
| + | arch/arm/boot/dts/mt7623.dtsi:766.3-24: Warning (resets_property): /consys@18070000:resets: cell 0 is not a phandle reference | ||
| + | arch/arm/boot/dts/mt7623.dtsi:759.26-777.4: Warning (resets_property): /consys@18070000: Missing property '#reset-cells' in node /regulator-1p8v or bad phandle (referred from resets[0]) | ||
| + | arch/arm/boot/dts/mt7623.dtsi:610.25-53: Warning (gpios_property): /usb@11200000/connector:id-gpios: cell 0 is not a phandle reference | ||
| + | DTC arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dtb | ||
| + | arch/arm/boot/dts/mt7623.dtsi:762.3-24: Warning (clocks_property): /consys@18070000:clocks: cell 0 is not a phandle reference | ||
| + | arch/arm/boot/dts/mt7623.dtsi:764.3-31: Warning (power_domains_property): /consys@18070000:power-domains: cell 0 is not a phandle reference | ||
| + | arch/arm/boot/dts/mt7623.dtsi:766.3-24: Warning (resets_property): /consys@18070000:resets: cell 0 is not a phandle reference | ||
| + | arch/arm/boot/dts/mt7623.dtsi:610.25-53: Warning (gpios_property): /usb@11200000/connector:id-gpios: cell 0 is not a phandle reference | ||
| + | DTC arch/arm/boot/dts/mt7629-rfb.dtb | ||
| + | DTC arch/arm/boot/dts/mt8127-moose.dtb | ||
| + | DTC arch/arm/boot/dts/mt8135-evbp1.dtb | ||
| + | LDS arch/arm/boot/compressed/vmlinux.lds | ||
| + | AS arch/arm/boot/compressed/head.o | ||
| + | |||
| + | </pre> | ||
| + | |||
== Miscellaneous Links == | == Miscellaneous Links == | ||
Latest revision as of 11:53, 21 June 2022
Debian System
Working with this kernel.
The default config contains:
#OTG CONFIG_USB_OTG=y CONFIG_USB_CONN_GPIO=y CONFIG_USB_MUSB_HDRC=y CONFIG_USB_MUSB_MEDIATEK=y CONFIG_NOP_USB_XCEIV=y CONFIG_USB_CONFIGFS=y #CONFIG_USB_CONFIGFS_MASS_STORAGE=y #CONFIG_PHY_MTK_TPHY=y CONFIG_USB_GADGET=y CONFIG_USB_MUSB_DUAL_ROLE=y CONFIG_USB_INVENTRA_DMA=y #some gadget-drivers #CONFIG_USB_G_SERIAL=y #CONFIG_USB_MASS_STORAGE=y #CONFIG_USB_ETH=y CONFIG_USB_LIBCOMPOSITE=y CONFIG_USB_U_SERIAL=y CONFIG_USB_U_ETHER=y CONFIG_USB_F_SERIAL=y CONFIG_USB_F_ECM=y CONFIG_USB_F_MASS_STORAGE=y CONFIG_USB_F_HID=y CONFIG_USB_CONFIGFS=y CONFIG_USB_CONFIGFS_SERIAL=y # CONFIG_USB_CONFIGFS_ACM is not set # CONFIG_USB_CONFIGFS_OBEX is not set # CONFIG_USB_CONFIGFS_NCM is not set CONFIG_USB_CONFIGFS_ECM=y # CONFIG_USB_CONFIGFS_ECM_SUBSET is not set # CONFIG_USB_CONFIGFS_RNDIS is not set # CONFIG_USB_CONFIGFS_EEM is not set CONFIG_USB_CONFIGFS_MASS_STORAGE=y # CONFIG_USB_CONFIGFS_F_LB_SS is not set # CONFIG_USB_CONFIGFS_F_FS is not set # CONFIG_USB_CONFIGFS_F_UAC1 is not set # CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set # CONFIG_USB_CONFIGFS_F_UAC2 is not set # CONFIG_USB_CONFIGFS_F_MIDI is not set CONFIG_USB_CONFIGFS_F_HID=y # CONFIG_USB_CONFIGFS_F_UVC is not set # CONFIG_USB_CONFIGFS_F_PRINTER is not set
root@bpi-r2:/sys/devices/platform# ls -ls total 0 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 10000000.syscon 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 10001000.syscon 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 10003000.syscon 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 10005000.syscfg 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 10006000.power-controller 0 drwxr-xr-x 5 root root 0 Mar 20 19:55 10007000.watchdog 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 10008000.timer 0 drwxr-xr-x 5 root root 0 Mar 20 19:55 1000b000.pinctrl 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 1000c000.smi 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 1000d000.pwrap 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 10010000.dsi-phy 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 10012000.cec 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 10013000.cir 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 10205000.mmsys_iommu 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 10206000.efuse 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 10209000.syscon 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 10209100.hdmi-phy 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 1020f000.rng 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 11000780.btif_tx 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 11000800.btif_rx 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 11001000.adc 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 11002000.serial 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 11003000.serial 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 11004000.serial 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 11006000.pwm 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 11007000.i2c 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 11008000.i2c 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 1100a000.spi 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 1100b000.thermal 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 1100c000.serial 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 11013000.i2c 0 drwxr-xr-x 6 root root 0 Mar 20 19:55 11200000.usb 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 11210000.t-phy 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 11220000.clock-controller 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 11230000.mmc 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 11240000.mmc 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 13000000.syscon 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 13040000.gpu 0 drwxr-xr-x 5 root root 0 Mar 20 19:55 14000000.syscon 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 14007000.ovl 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 14008000.rdma 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 14009000.wdma 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 1400a000.pwm 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 1400b000.color 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 1400e000.mutex 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 14010000.larb 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 14012000.rdma 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 14014000.dpi 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 14015000.hdmi 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 15000000.syscon 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 15001000.larb 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 15004000.jpegdec 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 16000000.syscon 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 16010000.larb 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 18070000.consys 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 180f0000.wifi 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 1a000000.syscon 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 1a140000.pcie 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 1a149000.t-phy 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 1a14a000.t-phy 0 drwxr-xr-x 6 root root 0 Mar 20 19:55 1a1c0000.usb 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 1a1c4000.t-phy 0 drwxr-xr-x 6 root root 0 Mar 20 19:55 1a240000.usb 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 1a244000.t-phy 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 1b000000.syscon 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 1b007000.dma-controller 0 drwxr-xr-x 5 root root 0 Mar 20 19:55 1b100000.ethernet 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 1b240000.crypto 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 1c000000.syscon 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 connector 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 'Fixed MDIO bus.0' 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 fixedregulator@0 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 gpio-keys 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 leds 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 mtk-cpufreq 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 pmu 0 drwxr-xr-x 2 root root 0 Jun 9 06:33 power 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 reg-dummy 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 regulator-1p8v 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 regulator-3p3v 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 regulator-5v 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 regulatory.0 0 drwxr-xr-x 4 root root 0 Mar 20 19:55 serial8250 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 snd-soc-dummy 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 timer 0 -rw-r--r-- 1 root root 4096 Mar 20 19:55 uevent 0 drwxr-xr-x 3 root root 0 Mar 20 19:55 usb_phy_generic.3.auto
dmesg
root@bpi-r2:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.15.41-bpi-r2bpi-r2-openwrt (lth@ncpws04) (arm-linux-gnueabihf-gcc (Debian 11.3.0-3) 11.3.0, GNU ld (GNU Binutils for Debian) 2.38) #5 SMP Tue Jun 7 09:24:33 +08 2022 [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Bananapi BPI-R2 [ 0.000000] printk: bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] [WMT-CONSYS-HW][W]reserve_memory_consys_fn: name: consys-reserve-memory, base: 0xffe00000, size: 0x100000 [ 0.000000] OF: reserved mem: initialized node consys-reserve-memory, compatible id mediatek,consys-reserve-memory [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] HighMem [mem 0x00000000a0000000-0x00000000ffffefff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000ffdfffff] [ 0.000000] node 0: [mem 0x00000000ffe00000-0x00000000ffefffff] [ 0.000000] node 0: [mem 0x00000000fff00000-0x00000000ffffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffefff] [ 0.000000] percpu: Embedded 16 pages/cpu s36044 r8192 d21300 u65536 [ 0.000000] pcpu-alloc: s36044 r8192 d21300 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 523135 [ 0.000000] Kernel command line: board=bpi-r2 earlyprintk console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait vmalloc=496M debug=7 initcall_debug=0 video=1920x1080 console=tty1 fbcon=map:0 drm.debug=0x7 [ 0.000000] Unknown kernel command line parameters "board=bpi-r2", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1989724K/2097148K available (13312K kernel code, 1569K rwdata, 4504K rodata, 1024K init, 563K bss, 41888K reserved, 65536K cma-reserved, 1506300K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 43504 entries in 128 pages [ 0.000000] ftrace: allocated 128 pages with 1 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x4a4/0x678 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns [ 0.000001] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns [ 0.008062] Switching to timer-based delay loop, resolution 76ns [ 0.014278] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 147020034397 ns [ 0.023571] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 165191050201ns [ 0.032103] Console: colour dummy device 80x30 [ 0.036587] printk: console [tty1] enabled [ 0.040715] printk: bootconsole [earlycon0] disabled [ 0.045773] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000) [ 0.045808] pid_max: default: 32768 minimum: 301 [ 0.046038] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.046073] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.047032] CPU: Testing write buffer coherency: ok [ 0.047405] CPU0: update cpu_capacity 1024 [ 0.047436] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.048321] Setting up static identity map for 0x80100000 - 0x80100060 [ 0.048481] rcu: Hierarchical SRCU implementation. [ 0.049584] smp: Bringing up secondary CPUs ... [ 0.050214] CPU1: update cpu_capacity 1024 [ 0.050229] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.050973] CPU2: update cpu_capacity 1024 [ 0.050989] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.051676] CPU3: update cpu_capacity 1024 [ 0.051692] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.051823] smp: Brought up 1 node, 4 CPUs [ 0.051906] SMP: Total of 4 processors activated (104.00 BogoMIPS). [ 0.051925] CPU: All CPU(s) started in SVC mode. [ 0.052688] devtmpfs: initialized [ 0.060867] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3 [ 0.061238] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.061289] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.063821] pinctrl core: initialized pinctrl subsystem [ 0.064965] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.067473] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.068796] thermal_sys: Registered thermal governor 'step_wise' [ 0.069193] No ATAGs? [ 0.069396] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.069433] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.143197] gpiochip_find_base: found new base at 232 [ 0.143814] gpio gpiochip0: (1000b000.pinctrl): added GPIO chardev (254:0) [ 0.143963] gpio gpiochip0: registered GPIOs 232 to 511 on 1000b000.pinctrl [ 0.143998] gpio gpiochip0: (1000b000.pinctrl): created GPIO range 0->279 ==> 1000b000.pinctrl PIN 0->279 [ 0.179304] platform 14015000.hdmi: Fixing up cyclic dependency with 14014000.dpi [ 0.181392] platform connector: Fixing up cyclic dependency with 14015000.hdmi [ 0.366455] raid6: neonx8 gen() 678 MB/s [ 0.536591] raid6: neonx8 xor() 551 MB/s [ 0.706740] raid6: neonx4 gen() 935 MB/s [ 0.876858] raid6: neonx4 xor() 711 MB/s [ 1.047013] raid6: neonx2 gen() 944 MB/s [ 1.217155] raid6: neonx2 xor() 692 MB/s [ 1.387304] raid6: neonx1 gen() 773 MB/s [ 1.557453] raid6: neonx1 xor() 568 MB/s [ 1.727669] raid6: int32x8 gen() 244 MB/s [ 1.897775] raid6: int32x8 xor() 151 MB/s [ 2.067963] raid6: int32x4 gen() 253 MB/s [ 2.238059] raid6: int32x4 xor() 163 MB/s [ 2.408287] raid6: int32x2 gen() 307 MB/s [ 2.578393] raid6: int32x2 xor() 185 MB/s [ 2.748561] raid6: int32x1 gen() 324 MB/s [ 2.918671] raid6: int32x1 xor() 180 MB/s [ 2.918692] raid6: using algorithm neonx2 gen() 944 MB/s [ 2.918709] raid6: .... xor() 692 MB/s, rmw enabled [ 2.918726] raid6: using neon recovery algorithm [ 2.919349] reg-fixed-voltage regulator-1p8v: GPIO lookup for consumer (null) [ 2.919391] reg-fixed-voltage regulator-1p8v: using device tree for GPIO lookup [ 2.919426] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1p8v[0]' [ 2.919477] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1p8v[0]' [ 2.919516] reg-fixed-voltage regulator-1p8v: using lookup tables for GPIO lookup [ 2.919542] reg-fixed-voltage regulator-1p8v: No GPIO consumer (null) found [ 2.919912] reg-fixed-voltage regulator-3p3v: GPIO lookup for consumer (null) [ 2.919947] reg-fixed-voltage regulator-3p3v: using device tree for GPIO lookup [ 2.919980] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-3p3v[0]' [ 2.920023] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-3p3v[0]' [ 2.920060] reg-fixed-voltage regulator-3p3v: using lookup tables for GPIO lookup [ 2.920085] reg-fixed-voltage regulator-3p3v: No GPIO consumer (null) found [ 2.920428] reg-fixed-voltage regulator-5v: GPIO lookup for consumer (null) [ 2.920459] reg-fixed-voltage regulator-5v: using device tree for GPIO lookup [ 2.920490] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-5v[0]' [ 2.920534] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-5v[0]' [ 2.920570] reg-fixed-voltage regulator-5v: using lookup tables for GPIO lookup [ 2.920595] reg-fixed-voltage regulator-5v: No GPIO consumer (null) found [ 2.920887] reg-fixed-voltage fixedregulator@0: GPIO lookup for consumer (null) [ 2.920919] reg-fixed-voltage fixedregulator@0: using device tree for GPIO lookup [ 2.920951] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator@0[0]' [ 2.920994] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator@0[0]' [ 2.921031] reg-fixed-voltage fixedregulator@0: using lookup tables for GPIO lookup [ 2.921056] reg-fixed-voltage fixedregulator@0: No GPIO consumer (null) found [ 2.921327] iommu: Default domain type: Translated [ 2.921353] iommu: DMA domain TLB invalidation policy: strict mode [ 2.921578] vgaarb: loaded [ 2.922103] SCSI subsystem initialized [ 2.922385] libata version 3.00 loaded. [ 2.922642] usbcore: registered new interface driver usbfs [ 2.922712] usbcore: registered new interface driver hub [ 2.922797] usbcore: registered new device driver usb [ 2.923130] mc: Linux media interface: v0.10 [ 2.923196] videodev: Linux video capture interface: v2.00 [ 2.923290] pps_core: LinuxPPS API ver. 1 registered [ 2.923310] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 2.923350] PTP clock support registered [ 2.924151] mediatek,efuse 10206000.efuse: GPIO lookup for consumer wp [ 2.924196] mediatek,efuse 10206000.efuse: using device tree for GPIO lookup [ 2.924229] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/efuse@10206000[0]' [ 2.924281] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/efuse@10206000[0]' [ 2.924322] mediatek,efuse 10206000.efuse: using lookup tables for GPIO lookup [ 2.924347] mediatek,efuse 10206000.efuse: No GPIO consumer wp found [ 2.924818] Advanced Linux Sound Architecture Driver Initialized. [ 2.925642] Bluetooth: Core ver 2.22 [ 2.925728] NET: Registered PF_BLUETOOTH protocol family [ 2.925749] Bluetooth: HCI device and connection manager initialized [ 2.925776] Bluetooth: HCI socket layer initialized [ 2.925797] Bluetooth: L2CAP socket layer initialized [ 2.925830] Bluetooth: SCO socket layer initialized [ 2.926545] clocksource: Switched to clocksource arch_sys_counter [ 3.005895] NET: Registered PF_INET protocol family [ 3.006086] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 3.006954] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 3.007038] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 3.007102] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 3.007178] TCP: Hash tables configured (established 4096 bind 4096) [ 3.007316] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 3.007376] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 3.007603] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.017278] RPC: Registered named UNIX socket transport module. [ 3.017326] RPC: Registered udp transport module. [ 3.017343] RPC: Registered tcp transport module. [ 3.017359] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.017383] PCI: CLS 0 bytes, default 64 [ 4.070278] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 4.072179] Initialise system trusted keyrings [ 4.072482] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 4.080465] NFS: Registering the id_resolver key type [ 4.080547] Key type id_resolver registered [ 4.080567] Key type id_legacy registered [ 4.080686] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 4.080718] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 4.171415] xor: measuring software checksum speed [ 4.181213] arm4regs : 1014 MB/sec [ 4.193047] 8regs : 835 MB/sec [ 4.203384] 32regs : 954 MB/sec [ 4.210410] neon : 1407 MB/sec [ 4.210430] xor: using function: neon (1407 MB/sec) [ 4.210453] async_tx: api initialized (async) [ 4.210474] Key type asymmetric registered [ 4.210491] Asymmetric key parser 'x509' registered [ 4.210650] bounce: pool size: 64 pages [ 4.210732] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 4.210763] io scheduler mq-deadline registered [ 4.210781] io scheduler kyber registered [ 4.214410] mediatek-hdmi-phy 10209100.hdmi-phy: Using default TX DRV impedance: 4.2k/36 [ 4.215779] mediatek-mipi-tx 10010000.dsi-phy: can't get nvmem_cell_get, ignore it [ 4.282510] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 4.284637] printk: console [ttyS0] disabled [ 4.284694] mt6577-uart 11004000.serial: GPIO lookup for consumer rs485-term [ 4.284720] mt6577-uart 11004000.serial: using device tree for GPIO lookup [ 4.284752] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/serial@11004000[0]' [ 4.284805] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/serial@11004000[0]' [ 4.284848] mt6577-uart 11004000.serial: using lookup tables for GPIO lookup [ 4.284871] mt6577-uart 11004000.serial: No GPIO consumer rs485-term found [ 4.305102] 11004000.serial: ttyS0 at MMIO 0x11004000 (irq = 207, base_baud = 1625000) is a ST16650V2 [ 5.571902] printk: console [ttyS0] enabled [ 5.577265] mt6577-uart 11002000.serial: GPIO lookup for consumer rs485-term [ 5.584343] mt6577-uart 11002000.serial: using device tree for GPIO lookup [ 5.591291] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/serial@11002000[0]' [ 5.601113] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/serial@11002000[0]' [ 5.610811] mt6577-uart 11002000.serial: using lookup tables for GPIO lookup [ 5.617884] mt6577-uart 11002000.serial: No GPIO consumer rs485-term found [ 5.644912] 11002000.serial: ttyS1 at MMIO 0x11002000 (irq = 208, base_baud = 1625000) is a ST16650V2 [ 5.655258] mt6577-uart 11003000.serial: GPIO lookup for consumer rs485-term [ 5.662391] mt6577-uart 11003000.serial: using device tree for GPIO lookup [ 5.669324] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/serial@11003000[0]' [ 5.679118] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/serial@11003000[0]' [ 5.688814] mt6577-uart 11003000.serial: using lookup tables for GPIO lookup [ 5.695871] mt6577-uart 11003000.serial: No GPIO consumer rs485-term found [ 5.722915] 11003000.serial: ttyS2 at MMIO 0x11003000 (irq = 209, base_baud = 1625000) is a ST16650V2 [ 5.733576] mtk_rng 1020f000.rng: registered RNG driver [ 5.733723] random: fast init done [ 5.739904] platform 15004000.jpegdec: Adding to iommu group 0 [ 5.742520] random: crng init done [ 5.748361] platform 14007000.ovl: Adding to iommu group 1 [ 5.757286] platform 14008000.rdma: Adding to iommu group 2 [ 5.763006] platform 14009000.wdma: Adding to iommu group 3 [ 5.768782] platform 14012000.rdma: Adding to iommu group 4 [ 5.778204] [drm:drm_core_init] Initialized [ 5.787985] mediatek-drm mediatek-drm.1.auto: Adding component match for /ovl@14007000 [ 5.796039] mediatek-drm mediatek-drm.1.auto: Adding component match for /rdma@14008000 [ 5.804268] mediatek-drm mediatek-drm.1.auto: Adding component match for /color@1400b000 [ 5.812538] mediatek-drm mediatek-drm.1.auto: Adding component match for /rdma@14012000 [ 5.820658] mediatek-drm mediatek-drm.1.auto: Adding component match for /dpi@14014000 [ 5.831497] [drm] hdmi-audio-codec driver bound to HDMI [ 5.845541] loop: module loaded [ 5.848965] [WMT-DETECT][I]wmt_detect_driver_init:driver(major 154) installed success [ 5.856882] [SDIO-DETECT][I]sdio_detect_init:sdio_register_driver() ret=0 [ 5.863866] MTK-BTIF[E]hal_btif_clk_get_and_prepare(284):[CCF]clk_btif=c9901674 [ 5.871244] MTK-BTIF[E]hal_btif_clk_get_and_prepare(290):[CCF]clk_btif_apdma=bcba51f7 [ 5.881872] mt6323-regulator mt6323-regulator: Chip ID = 0x2023 [ 5.899059] mdio_bus fixed-0: GPIO lookup for consumer reset [ 5.904756] mdio_bus fixed-0: using lookup tables for GPIO lookup [ 5.910915] mdio_bus fixed-0: No GPIO consumer reset found [ 5.939647] of_get_named_gpiod_flags: can't parse 'link-gpios' property of node '/ethernet@1b100000/mac@0/fixed-link[0]' [ 5.950606] of_get_named_gpiod_flags: can't parse 'link-gpio' property of node '/ethernet@1b100000/mac@0/fixed-link[0]' [ 5.961498] of_get_named_gpiod_flags: can't parse 'link-gpios' property of node '/ethernet@1b100000/mac@1/fixed-link[0]' [ 5.972426] of_get_named_gpiod_flags: can't parse 'link-gpio' property of node '/ethernet@1b100000/mac@1/fixed-link[0]' [ 5.983977] mdio_bus mdio-bus: GPIO lookup for consumer reset [ 5.989786] mdio_bus mdio-bus: using device tree for GPIO lookup [ 5.995810] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ethernet@1b100000/mdio-bus[0]' [ 6.006122] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ethernet@1b100000/mdio-bus[0]' [ 6.016338] mdio_bus mdio-bus: using lookup tables for GPIO lookup [ 6.022538] mdio_bus mdio-bus: No GPIO consumer reset found [ 6.028931] mt7530 mdio-bus:00: GPIO lookup for consumer reset [ 6.034787] mt7530 mdio-bus:00: using device tree for GPIO lookup [ 6.040979] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/ethernet@1b100000/mdio-bus/switch@0[0]' - status (0) [ 6.052812] gpio gpiochip0: Persistence not supported for GPIO 33 [ 6.060364] mtk_soc_eth 1b100000.ethernet: generated random MAC address 46:60:51:82:42:4b [ 6.069193] mtk_soc_eth 1b100000.ethernet eth0: mediatek frame engine at 0xe0ce0000, irq 226 [ 6.077807] mtk_soc_eth 1b100000.ethernet: generated random MAC address 8a:89:42:c6:9a:c3 [ 6.086448] mtk_soc_eth 1b100000.ethernet eth1: mediatek frame engine at 0xe0ce0000, irq 226 [ 6.096999] xhci-mtk 1a1c0000.usb: xHCI Host Controller [ 6.102283] xhci-mtk 1a1c0000.usb: new USB bus registered, assigned bus number 1 [ 6.113592] xhci-mtk 1a1c0000.usb: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000290010 [ 6.122819] xhci-mtk 1a1c0000.usb: irq 223, io mem 0x1a1c0000 [ 6.129727] hub 1-0:1.0: USB hub found [ 6.133566] hub 1-0:1.0: 1 port detected [ 6.138048] xhci-mtk 1a1c0000.usb: xHCI Host Controller [ 6.143305] xhci-mtk 1a1c0000.usb: new USB bus registered, assigned bus number 2 [ 6.150764] xhci-mtk 1a1c0000.usb: Host supports USB 3.0 SuperSpeed [ 6.157158] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 6.166053] hub 2-0:1.0: USB hub found [ 6.170060] hub 2-0:1.0: 1 port detected [ 6.175534] xhci-mtk 1a240000.usb: xHCI Host Controller [ 6.180878] xhci-mtk 1a240000.usb: new USB bus registered, assigned bus number 3 [ 6.192138] xhci-mtk 1a240000.usb: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000290010 [ 6.201352] xhci-mtk 1a240000.usb: irq 224, io mem 0x1a240000 [ 6.208242] hub 3-0:1.0: USB hub found [ 6.212082] hub 3-0:1.0: 1 port detected [ 6.216474] xhci-mtk 1a240000.usb: xHCI Host Controller [ 6.221794] xhci-mtk 1a240000.usb: new USB bus registered, assigned bus number 4 [ 6.229241] xhci-mtk 1a240000.usb: Host supports USB 3.0 SuperSpeed [ 6.235624] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 6.244673] hub 4-0:1.0: USB hub found [ 6.248553] hub 4-0:1.0: 1 port detected [ 6.253352] usbcore: registered new interface driver usb-storage [ 6.260450] usb-conn-gpio 11200000.usb:connector: GPIO lookup for consumer id [ 6.267647] usb-conn-gpio 11200000.usb:connector: using device tree for GPIO lookup [ 6.275341] of_get_named_gpiod_flags: parsed 'id-gpios' property of node '/usb@11200000/connector[0]' - status (0) [ 6.285782] gpio gpiochip0: Persistence not supported for GPIO 44 [ 6.291912] usb-conn-gpio 11200000.usb:connector: GPIO lookup for consumer vbus [ 6.299252] usb-conn-gpio 11200000.usb:connector: using device tree for GPIO lookup [ 6.306939] of_get_named_gpiod_flags: can't parse 'vbus-gpios' property of node '/usb@11200000/connector[0]' [ 6.316827] of_get_named_gpiod_flags: can't parse 'vbus-gpio' property of node '/usb@11200000/connector[0]' [ 6.326615] usb-conn-gpio 11200000.usb:connector: using lookup tables for GPIO lookup [ 6.334456] usb-conn-gpio 11200000.usb:connector: No GPIO consumer vbus found [ 6.341658] usb-conn-gpio 11200000.usb:connector: supply vbus not found, using dummy regulator [ 6.351243] usb_phy_generic usb_phy_generic.3.auto: GPIO lookup for consumer reset [ 6.358920] usb_phy_generic usb_phy_generic.3.auto: using lookup tables for GPIO lookup [ 6.366976] usb_phy_generic usb_phy_generic.3.auto: No GPIO consumer reset found [ 6.374385] usb_phy_generic usb_phy_generic.3.auto: GPIO lookup for consumer vbus-detect [ 6.382498] usb_phy_generic usb_phy_generic.3.auto: using lookup tables for GPIO lookup [ 6.390528] usb_phy_generic usb_phy_generic.3.auto: No GPIO consumer vbus-detect found [ 6.398500] usb_phy_generic usb_phy_generic.3.auto: supply vcc not found, using dummy regulator [ 6.407428] usb_phy_generic usb_phy_generic.3.auto: dummy supplies not allowed for exclusive requests [ 6.417659] musb-hdrc musb-hdrc.4.auto: MUSB HDRC host driver [ 6.423449] musb-hdrc musb-hdrc.4.auto: new USB bus registered, assigned bus number 5 [ 6.432203] hub 5-0:1.0: USB hub found [ 6.436028] hub 5-0:1.0: 1 port detected [ 6.441734] mousedev: PS/2 mouse device common for all mice [ 6.449132] mt6397-rtc mt6323-rtc: registered as rtc0 [ 6.454257] mt6397-rtc mt6323-rtc: setting system clock to 2022-06-21T02:28:21 UTC (1655778501) [ 6.465280] Registered IR keymap rc-empty [ 6.469499] rc rc0: mtk_cir as /devices/platform/10013000.cir/rc/rc0 [ 6.476263] rc rc0: lirc_dev: driver mtk_cir registered at minor = 0, raw IR receiver, no transmitter [ 6.485706] input: mtk_cir as /devices/platform/10013000.cir/rc/rc0/input0 [ 6.493122] mtk_cir 10013000.cir: Initialized MT7623 IR driver, sample period = 46us [ 6.502026] mtk-jpeg 15004000.jpegdec: mtk-jpeg-dec device registered as /dev/video0 (81,0) [ 6.511222] mtk-thermal 1100b000.thermal: Device not calibrated, using default calibration values [ 6.521937] mtk-wdt 10007000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0) [ 6.531087] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 6.540040] device-mapper: multipath round-robin: version 1.2.0 loaded [ 6.546634] device-mapper: multipath queue-length: version 0.2.0 loaded [ 6.553255] device-mapper: multipath service-time: version 0.3.0 loaded [ 6.559946] device-mapper: raid: Loading target version 1.15.1 [ 6.566404] cpu cpu0: dummy supplies not allowed for exclusive requests [ 6.576147] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/blue[0]' - status (0) [ 6.576237] mtk-msdc 11240000.mmc: GPIO lookup for consumer cd [ 6.585260] gpio gpiochip0: Persistence not supported for GPIO 240 [ 6.591092] mtk-msdc 11240000.mmc: using device tree for GPIO lookup [ 6.597285] gpio-472 (?): no flags found for gpios [ 6.603655] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/mmc@11240000[0]' - status (0) [ 6.608591] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/green[0]' - status (0) [ 6.609367] mtk-msdc 11230000.mmc: GPIO lookup for consumer wp [ 6.609381] mtk-msdc 11230000.mmc: using device tree for GPIO lookup [ 6.609396] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/mmc@11230000[0]' [ 6.609423] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/mmc@11230000[0]' [ 6.609445] mtk-msdc 11230000.mmc: using lookup tables for GPIO lookup [ 6.609453] mtk-msdc 11230000.mmc: No GPIO consumer wp found [ 6.617995] gpio gpiochip0: Persistence not supported for GPIO 261 [ 6.627071] gpio gpiochip0: Persistence not supported for GPIO 241 [ 6.632900] mtk-msdc 11240000.mmc: Got CD GPIO [ 6.639253] gpio-473 (?): no flags found for gpios [ 6.648056] mtk-msdc 11240000.mmc: GPIO lookup for consumer wp [ 6.656921] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/red[0]' - status (0) [ 6.663290] mtk-msdc 11240000.mmc: using device tree for GPIO lookup [ 6.668990] gpio gpiochip0: Persistence not supported for GPIO 239 [ 6.675155] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/mmc@11240000[0]' [ 6.681352] gpio-471 (?): no flags found for gpios [ 6.685803] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/mmc@11240000[0]' [ 6.692630] hid: raw HID events driver (C) Jiri Kosina [ 6.696438] mtk-msdc 11240000.mmc: using lookup tables for GPIO lookup [ 6.705517] usbcore: registered new interface driver usbhid [ 6.711721] mtk-msdc 11240000.mmc: No GPIO consumer wp found [ 6.717914] usbhid: USB HID core driver [ 6.719953] mtk-iommu-v1 10205000.mmsys_iommu: bound 14010000.larb (ops mtk_smi_larb_component_ops) [ 6.776114] mtk-iommu-v1 10205000.mmsys_iommu: bound 16010000.larb (ops mtk_smi_larb_component_ops) [ 6.785209] mtk-iommu-v1 10205000.mmsys_iommu: bound 15001000.larb (ops mtk_smi_larb_component_ops) [ 6.798515] NET: Registered PF_INET6 protocol family [ 6.805067] Segment Routing with IPv6 [ 6.808887] In-situ OAM (IOAM) with IPv6 [ 6.812904] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 6.819566] NET: Registered PF_PACKET protocol family [ 6.825317] NET: Registered PF_KCM protocol family [ 6.830383] 8021q: 802.1Q VLAN Support v1.8 [ 6.834927] ThumbEE CPU extension supported. [ 6.839250] Registering SWP/SWPB emulation handler [ 6.844495] Loading compiled-in X.509 certificates [ 6.861920] mmc0: host does not support reading read-only switch, assuming write-enable [ 6.870526] mmc0: new SDHC card at address 0001 [ 6.875975] mtk-pcie 1a140000.pcie: host bridge /pcie@1a140000 ranges: [ 6.882627] mtk-pcie 1a140000.pcie: IO 0x001a160000..0x001a16ffff -> 0x001a160000 [ 6.890700] mtk-pcie 1a140000.pcie: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 6.892105] mmc1: new high speed MMC card at address 0001 [ 6.900303] mmcblk0: mmc0:0001 SD16G 14.6 GiB [ 6.905500] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB [ 6.916159] mmcblk0: p1 p2 [ 6.916360] mmcblk1: p1 p2 p3 [ 6.923541] mmcblk1boot0: mmc1:0001 8GTF4R 4.00 MiB [ 6.931612] mmcblk1boot1: mmc1:0001 8GTF4R 4.00 MiB [ 6.939075] mmcblk1rpmb: mmc1:0001 8GTF4R 512 KiB, chardev (242:0) [ 6.948329] mtk-pcie 1a140000.pcie: PCI host bridge to bus 0000:00 [ 6.954533] pci_bus 0000:00: root bus resource [bus 00-ff] [ 6.960086] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0x1a160000-0x1a16ffff]) [ 6.969602] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] [ 6.976546] pci 0000:00:00.0: [14c3:0801] type 01 class 0x060400 [ 6.982585] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff] [ 6.988962] pci 0000:00:00.0: supports D1 [ 6.992981] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 6.999212] pci 0000:00:01.0: [14c3:0801] type 01 class 0x060400 [ 7.005260] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff] [ 7.011639] pci 0000:00:01.0: supports D1 [ 7.015659] pci 0000:00:01.0: PME# supported from D0 D1 D3hot [ 7.024286] PCI: bus0: Fast back to back transfers disabled [ 7.029929] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 7.037994] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 7.046221] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000 [ 7.052301] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0007ffff 64bit] [ 7.059161] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 7.065983] pci 0000:01:00.0: supports D1 [ 7.070021] pci 0000:01:00.0: PME# supported from D0 D1 D3hot [ 7.099260] PCI: bus1: Fast back to back transfers disabled [ 7.104861] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 7.111770] pci 0000:02:00.0: [1b21:0611] type 00 class 0x010185 [ 7.117849] pci 0000:02:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 7.124909] pci 0000:02:00.0: reg 0x10: [io size 0x0008] [ 7.130341] pci 0000:02:00.0: reg 0x14: initial BAR value 0x00000000 invalid [ 7.137413] pci 0000:02:00.0: reg 0x14: [io size 0x0004] [ 7.142827] pci 0000:02:00.0: reg 0x18: initial BAR value 0x00000000 invalid [ 7.149895] pci 0000:02:00.0: reg 0x18: [io size 0x0008] [ 7.155310] pci 0000:02:00.0: reg 0x1c: initial BAR value 0x00000000 invalid [ 7.162381] pci 0000:02:00.0: reg 0x1c: [io size 0x0004] [ 7.167811] pci 0000:02:00.0: reg 0x20: initial BAR value 0x00000000 invalid [ 7.174867] pci 0000:02:00.0: reg 0x20: [io size 0x0010] [ 7.180294] pci 0000:02:00.0: reg 0x24: [mem 0x00000000-0x000001ff] [ 7.186591] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 7.219254] PCI: bus2: Fast back to back transfers disabled [ 7.224856] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 7.231568] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] [ 7.238393] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref] [ 7.245632] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff] [ 7.252445] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref] [ 7.259696] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff] [ 7.266499] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff] [ 7.273314] pci 0000:00:01.0: BAR 7: assigned [io 0x1000-0x1fff] [ 7.279441] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x6007ffff 64bit] [ 7.286793] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref] [ 7.294031] pci 0000:00:00.0: PCI bridge to [bus 01] [ 7.299018] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] [ 7.305817] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref] [ 7.313071] pci 0000:02:00.0: BAR 6: assigned [mem 0x60300000-0x6030ffff pref] [ 7.320323] pci 0000:02:00.0: BAR 5: assigned [mem 0x60200000-0x602001ff] [ 7.327150] pci 0000:02:00.0: BAR 4: assigned [io 0x1000-0x100f] [ 7.333256] pci 0000:02:00.0: BAR 0: assigned [io 0x1010-0x1017] [ 7.339387] pci 0000:02:00.0: BAR 2: assigned [io 0x1018-0x101f] [ 7.345498] pci 0000:02:00.0: BAR 1: assigned [io 0x1020-0x1023] [ 7.351622] pci 0000:02:00.0: BAR 3: assigned [io 0x1024-0x1027] [ 7.357744] pci 0000:00:01.0: PCI bridge to [bus 02] [ 7.362716] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 7.368831] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff] [ 7.375629] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff pref] [ 7.383102] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 7.389490] pcieport 0000:00:00.0: PME: Signaling with IRQ 259 [ 7.395683] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 7.402023] pcieport 0000:00:01.0: PME: Signaling with IRQ 253 [ 7.408339] ahci 0000:02:00.0: version 3.0 [ 7.412465] ahci 0000:02:00.0: enabling device (0140 -> 0143) [ 7.418378] ahci 0000:02:00.0: SSS flag set, parallel bus scan disabled [ 7.425051] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl IDE mode [ 7.433105] ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 7.443590] scsi host0: ahci [ 7.447315] scsi host1: ahci [ 7.450514] ata1: SATA max UDMA/133 abar m512@0x60200000 port 0x60200100 irq 253 [ 7.458002] ata2: SATA max UDMA/133 abar m512@0x60200000 port 0x60200180 irq 253 [ 7.465988] mediatek-dpi 14014000.dpi: Found bridge node: /hdmi@14015000 [ 7.473044] mediatek-drm mediatek-drm.1.auto: bound 14007000.ovl (ops mtk_disp_ovl_component_ops) [ 7.482005] mediatek-drm mediatek-drm.1.auto: bound 14008000.rdma (ops mtk_disp_rdma_component_ops) [ 7.491096] mediatek-drm mediatek-drm.1.auto: bound 1400b000.color (ops mtk_disp_color_component_ops) [ 7.500352] mediatek-drm mediatek-drm.1.auto: bound 14012000.rdma (ops mtk_disp_rdma_component_ops) [ 7.509467] [drm:drm_connector_init] cmdline mode for connector HDMI-A-1 1920x1080@60Hz [ 7.517607] mediatek-drm mediatek-drm.1.auto: bound 14014000.dpi (ops mtk_dpi_component_ops) [ 7.526141] mediatek-drm mediatek-drm.1.auto: Not creating crtc 1 because component 9 is disabled or missing [ 7.536444] [drm:drm_minor_register] [ 7.540173] [drm:drm_minor_register] [ 7.544208] [drm:drm_minor_register] new minor registered 0 [ 7.549986] [drm:drm_sysfs_connector_add] adding "HDMI-A-1" to sysfs [ 7.556398] [drm:drm_sysfs_hotplug_event] generating hotplug event [ 7.562630] [drm] Initialized mediatek 1.0.0 20150513 for mediatek-drm.1.auto on minor 0 [ 7.570761] [drm:drm_client_modeset_probe] [ 7.574959] [drm:drm_mode_object_get] OBJ ID: 32 (2) [ 7.579962] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1] [ 7.587483] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1] status updated from unknown to disconnected [ 7.598833] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1] disconnected [ 7.607487] [drm:drm_client_modeset_probe] No connectors reported connected with modes [ 7.615417] [drm:drm_client_modeset_probe] connector 32 enabled? no [ 7.621714] [drm:drm_client_firmware_config.constprop.0] Not using firmware configuration [ 7.629922] [drm:drm_client_modeset_probe] picking CRTCs for 4096x4096 config [ 7.637087] [drm:drm_mode_object_put.part.0] OBJ ID: 32 (2) [ 7.642679] mediatek-drm mediatek-drm.1.auto: [drm:drm_fb_helper_single_fb_probe] test CRTC 0 primary plane [ 7.652456] mediatek-drm mediatek-drm.1.auto: [drm] Cannot find any crtc or sizes [ 7.660618] mt7530 mdio-bus:00: GPIO lookup for consumer reset [ 7.666477] mt7530 mdio-bus:00: using device tree for GPIO lookup [ 7.672632] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/ethernet@1b100000/mdio-bus/switch@0[0]' - status (0) [ 7.684460] gpio gpiochip0: Persistence not supported for GPIO 33 [ 7.690667] [drm:drm_sysfs_hotplug_event] generating hotplug event [ 7.696968] [drm:drm_client_modeset_probe] [ 7.701182] [drm:drm_mode_object_get] OBJ ID: 32 (2) [ 7.706175] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1] [ 7.713706] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1] disconnected [ 7.722361] [drm:drm_client_modeset_probe] No connectors reported connected with modes [ 7.730306] [drm:drm_client_modeset_probe] connector 32 enabled? no [ 7.736610] [drm:drm_client_firmware_config.constprop.0] Not using firmware configuration [ 7.744808] [drm:drm_client_modeset_probe] picking CRTCs for 4096x4096 config [ 7.751972] [drm:drm_mode_object_put.part.0] OBJ ID: 32 (2) [ 7.757585] mediatek-drm mediatek-drm.1.auto: [drm:drm_fb_helper_single_fb_probe] test CRTC 0 primary plane [ 7.762084] mt7530 mdio-bus:00: no interrupt support [ 7.767377] mediatek-drm mediatek-drm.1.auto: [drm] Cannot find any crtc or sizes [ 7.772766] mdio_bus mt7530-0: GPIO lookup for consumer reset [ 7.779841] mediatek-drm mediatek-drm.1.auto: [drm:drm_client_dev_hotplug] fbdev: ret=0 [ 7.785586] mdio_bus mt7530-0: using lookup tables for GPIO lookup [ 7.799832] mdio_bus mt7530-0: No GPIO consumer reset found [ 7.806002] mdio_bus mt7530-0:00: GPIO lookup for consumer reset [ 7.812067] mdio_bus mt7530-0:00: using lookup tables for GPIO lookup [ 7.818534] mdio_bus mt7530-0:00: No GPIO consumer reset found [ 7.825149] mdio_bus mt7530-0:01: GPIO lookup for consumer reset [ 7.831222] mdio_bus mt7530-0:01: using lookup tables for GPIO lookup [ 7.837694] mdio_bus mt7530-0:01: No GPIO consumer reset found [ 7.844286] mdio_bus mt7530-0:02: GPIO lookup for consumer reset [ 7.850363] mdio_bus mt7530-0:02: using lookup tables for GPIO lookup [ 7.856836] mdio_bus mt7530-0:02: No GPIO consumer reset found [ 7.863445] mdio_bus mt7530-0:03: GPIO lookup for consumer reset [ 7.869511] mdio_bus mt7530-0:03: using lookup tables for GPIO lookup [ 7.875965] mdio_bus mt7530-0:03: No GPIO consumer reset found [ 7.882580] mdio_bus mt7530-0:04: GPIO lookup for consumer reset [ 7.888647] mdio_bus mt7530-0:04: using lookup tables for GPIO lookup [ 7.895099] mdio_bus mt7530-0:04: No GPIO consumer reset found [ 7.901678] mdio_bus mt7530-0:05: GPIO lookup for consumer reset [ 7.907742] mdio_bus mt7530-0:05: using lookup tables for GPIO lookup [ 7.914195] mdio_bus mt7530-0:05: No GPIO consumer reset found [ 7.921436] mt7530 mdio-bus:00 wan (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7530 PHY] (irq=POLL) [ 7.933132] mt7530 mdio-bus:00 lan0 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7530 PHY] (irq=POLL) [ 7.944897] mt7530 mdio-bus:00 lan1 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7530 PHY] (irq=POLL) [ 7.956672] mt7530 mdio-bus:00 lan2 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7530 PHY] (irq=POLL) [ 7.966602] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.968401] mt7530 mdio-bus:00 lan3 (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7530 PHY] (irq=POLL) [ 7.974521] ata1.00: ATA-10: Patriot P210 256GB, U0506A0, max UDMA/133 [ 7.983849] of_get_named_gpiod_flags: can't parse 'link-gpios' property of node '/ethernet@1b100000/mdio-bus/switch@0/ports/port@5/fixed-link[0]' [ 7.990032] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 8.002560] of_get_named_gpiod_flags: can't parse 'link-gpio' property of node '/ethernet@1b100000/mdio-bus/switch@0/ports/port@5/fixed-link[0]' [ 8.012865] ata1.00: configured for UDMA/133 [ 8.023309] of_get_named_gpiod_flags: can't parse 'link-gpios' property of node '/ethernet@1b100000/mdio-bus/switch@0/ports/port@6/fixed-link[0]' [ 8.027100] scsi 0:0:0:0: Direct-Access ATA Patriot P210 256 6A0 PQ: 0 ANSI: 5 [ 8.039712] of_get_named_gpiod_flags: can't parse 'link-gpio' property of node '/ethernet@1b100000/mdio-bus/switch@0/ports/port@6/fixed-link[0]' [ 8.049317] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 8.061404] mt7530 mdio-bus:00: configuring for fixed/trgmii link mode [ 8.068470] sd 0:0:0:0: [sda] Write Protect is off [ 8.077529] DSA: tree 0 setup [ 8.079712] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.083009] usb-conn-gpio 11200000.usb:connector: GPIO lookup for consumer id [ 8.087917] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.094863] usb-conn-gpio 11200000.usb:connector: using device tree for GPIO lookup [ 8.108033] sda: sda1 [ 8.111647] of_get_named_gpiod_flags: parsed 'id-gpios' property of node '/usb@11200000/connector[0]' - status (0) [ 8.115163] sd 0:0:0:0: [sda] Attached SCSI disk [ 8.124373] gpio gpiochip0: Persistence not supported for GPIO 44 [ 8.135092] usb-conn-gpio 11200000.usb:connector: GPIO lookup for consumer vbus [ 8.142430] usb-conn-gpio 11200000.usb:connector: using device tree for GPIO lookup [ 8.150121] of_get_named_gpiod_flags: can't parse 'vbus-gpios' property of node '/usb@11200000/connector[0]' [ 8.159999] of_get_named_gpiod_flags: can't parse 'vbus-gpio' property of node '/usb@11200000/connector[0]' [ 8.169792] usb-conn-gpio 11200000.usb:connector: using lookup tables for GPIO lookup [ 8.177646] usb-conn-gpio 11200000.usb:connector: No GPIO consumer vbus found [ 8.184833] usb-conn-gpio 11200000.usb:connector: supply vbus not found, using dummy regulator [ 8.194327] mt7530 mdio-bus:00: Link is Up - 1Gbps/Full - flow control rx/tx [ 8.202987] ALSA device list: [ 8.205984] No soundcards found. [ 8.398023] ata2: SATA link down (SStatus 0 SControl 300) [ 8.403533] md: Waiting for all devices to be available before autodetect [ 8.410371] md: If you don't use raid, use raid=noautodetect [ 8.416038] md: Autodetecting RAID arrays. [ 8.420155] md: autorun ... [ 8.422950] md: ... autorun DONE. [ 8.443819] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 8.451205] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 8.865469] EXT4-fs (mmcblk0p2): recovery complete [ 8.892072] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. [ 8.902329] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 8.924905] devtmpfs: mounted [ 8.934481] Freeing unused kernel image (initmem) memory: 1024K [ 8.940780] Run /sbin/init as init process [ 8.944889] with arguments: [ 8.947886] /sbin/init [ 8.950598] with environment: [ 8.953738] HOME=/ [ 8.956098] TERM=linux [ 8.958839] board=bpi-r2 [ 10.998089] systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 11.024943] systemd[1]: Detected architecture arm. [ 11.062648] systemd[1]: Set hostname to <bpi-r2>. [ 11.916132] systemd[1]: /etc/systemd/system/rc-local.service:11: Support for option SysVStartPriority= has been removed and it is ignored [ 12.000753] systemd[1]: Queued start job for default target Graphical Interface. [ 12.013361] systemd[1]: Created slice system-getty.slice. [ 12.021414] systemd[1]: Created slice system-modprobe.slice. [ 12.029554] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 12.038062] systemd[1]: Created slice User and Session Slice. [ 12.044732] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 12.053650] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 12.061973] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 12.074083] systemd[1]: Reached target Local Encrypted Volumes. [ 12.080937] systemd[1]: Reached target Paths. [ 12.085785] systemd[1]: Reached target Remote File Systems. [ 12.091891] systemd[1]: Reached target Slices. [ 12.096903] systemd[1]: Reached target Swap. [ 12.104208] systemd[1]: Listening on Syslog Socket. [ 12.110460] systemd[1]: Listening on fsck to fsckd communication Socket. [ 12.118126] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 12.136063] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 12.145194] systemd[1]: Listening on Journal Socket (/dev/log). [ 12.152542] systemd[1]: Listening on Journal Socket. [ 12.159208] systemd[1]: Listening on Network Service Netlink Socket. [ 12.168308] systemd[1]: Listening on udev Control Socket. [ 12.174890] systemd[1]: Listening on udev Kernel Socket. [ 12.181730] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 12.194924] systemd[1]: Mounting POSIX Message Queue File System... [ 12.207731] systemd[1]: Mounting Kernel Debug File System... [ 12.219683] systemd[1]: Mounting Kernel Trace File System... [ 12.232597] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 12.248104] systemd[1]: Starting Load Kernel Module configfs... [ 12.260817] systemd[1]: Starting Load Kernel Module drm... [ 12.273094] systemd[1]: Starting Load Kernel Module fuse... [ 12.287034] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 12.301440] systemd[1]: Starting File System Check on Root Device... [ 12.318971] systemd[1]: Starting Journal Service... [ 12.452755] systemd[1]: Starting Load Kernel Modules... [ 12.464081] systemd[1]: Starting Coldplug All udev Devices... [ 12.480161] systemd[1]: Mounted POSIX Message Queue File System. [ 12.487463] systemd[1]: Mounted Kernel Debug File System. [ 12.493991] systemd[1]: Mounted Kernel Trace File System. [ 12.502257] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 12.517835] fuse: init (API version 7.34) [ 12.551940] systemd[1]: modprobe@configfs.service: Succeeded. [ 12.560077] systemd[1]: Finished Load Kernel Module configfs. [ 12.567947] systemd[1]: modprobe@drm.service: Succeeded. [ 12.575354] systemd[1]: Finished Load Kernel Module drm. [ 12.583186] systemd[1]: modprobe@fuse.service: Succeeded. [ 12.590523] systemd[1]: Finished Load Kernel Module fuse. [ 12.598773] systemd[1]: Finished Load Kernel Modules. [ 12.610707] systemd[1]: Mounting FUSE Control File System... [ 12.623205] systemd[1]: Mounting Kernel Configuration File System... [ 12.635660] systemd[1]: Started File System Check Daemon to report status. [ 12.650104] systemd[1]: Starting Apply Kernel Variables... [ 12.661737] systemd[1]: Mounted FUSE Control File System. [ 12.669295] systemd[1]: Mounted Kernel Configuration File System. [ 12.704528] systemd[1]: Finished File System Check on Root Device. [ 12.720410] systemd[1]: Starting Remount Root and Kernel File Systems... [ 12.733109] systemd[1]: Finished Apply Kernel Variables. [ 12.791304] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro. Quota mode: disabled. [ 12.810326] systemd[1]: Finished Remount Root and Kernel File Systems. [ 12.823173] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 12.832814] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 12.847656] systemd[1]: Starting Load/Save Random Seed... [ 12.860959] systemd[1]: Starting Create System Users... [ 13.005524] systemd[1]: Finished Load/Save Random Seed. [ 13.014029] systemd[1]: Finished Create System Users. [ 13.020687] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 13.034672] systemd[1]: Starting Create Static Device Nodes in /dev... [ 13.076259] systemd[1]: Started Journal Service. [ 13.150215] systemd-journald[161]: Received client request to flush runtime journal. [ 13.268600] systemd-journald[161]: File /var/log/journal/f4098fb7f96e464faa6efc47a185409f/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 14.413364] input: mtk-pmic-keys as /devices/platform/1000d000.pwrap/1000d000.pwrap:mt6323/mtk-pmic-keys/input/input1 [ 14.969381] lima 13040000.gpu: mmu gpmmu dte write test fail [ 14.975224] lima: probe of 13040000.gpu failed with error -5 [ 16.121548] SPI driver spidev has no spi_device_id for linux,spidev [ 16.122061] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 16.170872] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 16.193074] lanbr0: port 1(lan3) entered blocking state [ 16.198403] lanbr0: port 1(lan3) entered disabled state [ 16.208952] device lan3 entered promiscuous mode [ 16.213114] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 16.219404] lanbr0: port 2(lan2) entered blocking state [ 16.226964] lanbr0: port 2(lan2) entered disabled state [ 16.234191] device lan2 entered promiscuous mode [ 16.245997] lanbr0: port 3(lan1) entered blocking state [ 16.251364] lanbr0: port 3(lan1) entered disabled state [ 16.261567] device lan1 entered promiscuous mode [ 16.270851] lanbr0: port 4(lan0) entered blocking state [ 16.276124] lanbr0: port 4(lan0) entered disabled state [ 16.282954] device lan0 entered promiscuous mode [ 16.293951] mtk_soc_eth 1b100000.ethernet eth0: configuring for fixed/trgmii link mode [ 16.302080] device eth0 entered promiscuous mode [ 16.307136] mtk_soc_eth 1b100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 16.315644] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 16.326239] mt7530 mdio-bus:00 lan3: configuring for phy/gmii link mode [ 16.334958] mt7530 mdio-bus:00 lan2: configuring for phy/gmii link mode [ 16.343762] mt7530 mdio-bus:00 lan1: configuring for phy/gmii link mode [ 16.354611] mt7530 mdio-bus:00 lan0: configuring for phy/gmii link mode [ 18.051096] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 19.481662] ath9k 0000:01:00.0: enabling device (0140 -> 0142) [ 19.497104] ath: EEPROM regdomain: 0x6a [ 19.500974] ath: EEPROM indicates we should expect a direct regpair map [ 19.507637] ath: Country alpha2 being used: 00 [ 19.512096] ath: Regpair used: 0x6a [ 19.520331] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 19.529415] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xe1000000, irq=259 [ 19.599520] ath9k 0000:01:00.0 wlp1s0: renamed from wlan0 [ 20.276360] Mass Storage Function, version: 2009/09/11 [ 20.281632] LUN: removable file: (no medium) [ 20.364219] using random self ethernet address [ 20.368790] using random host ethernet address [ 20.469089] usb0: HOST MAC 48:6f:73:74:50:43 [ 20.473432] usb0: MAC 42:61:64:55:53:42 [ 20.842009] mt7530 mdio-bus:00 wan: configuring for phy/gmii link mode [ 23.957322] mt7530 mdio-bus:00 wan: Link is Up - 1Gbps/Full - flow control rx/tx [ 23.964785] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready [ 38.276587] vdd_fixed_vgpu: disabling [ 38.280310] vusb: disabling [ 38.283116] vmc: disabling [ 38.285829] vmch: disabling [ 38.288676] vgp1: disabling [ 38.291510] vcamaf: disabling
OpenWrt Attempt
Extracing dtb
dumpimage -T flat_dt -p 1 -o /tmp/bpir2.dtb /home/lth/openwrt-bpir2/bin/targets/ mediatek/mt7623/lifeline-0.0.67-dev-mediatek-mt7623-bananapi_bpi-r2-squashfs-sys upgrade.itb
dtc -I dtb -O dts bpir2.dtb -o bpir2.dts
Devices
root@llcon:/sys/devices/platform# ls -l drwxr-xr-x 3 root root 0 Jan 1 1970 10000000.syscon drwxr-xr-x 3 root root 0 Jan 1 1970 10001000.syscon drwxr-xr-x 3 root root 0 Jan 1 1970 10003000.syscon drwxr-xr-x 3 root root 0 Jan 1 1970 10005000.syscfg drwxr-xr-x 3 root root 0 Jan 1 1970 10006000.power-controller drwxr-xr-x 5 root root 0 Jan 1 1970 10007000.watchdog drwxr-xr-x 3 root root 0 Jan 1 1970 10008000.timer drwxr-xr-x 5 root root 0 Jan 1 1970 1000b000.pinctrl drwxr-xr-x 3 root root 0 Jan 1 1970 1000c000.smi drwxr-xr-x 4 root root 0 Jan 1 1970 1000d000.pwrap drwxr-xr-x 4 root root 0 Jan 1 1970 10010000.dsi-phy drwxr-xr-x 3 root root 0 Jan 1 1970 10012000.cec drwxr-xr-x 3 root root 0 Jan 1 1970 10013000.cir drwxr-xr-x 4 root root 0 Jan 1 1970 10205000.mmsys_iommu drwxr-xr-x 4 root root 0 Jan 1 1970 10206000.efuse drwxr-xr-x 3 root root 0 Jan 1 1970 10209000.syscon drwxr-xr-x 4 root root 0 Jan 1 1970 10209100.hdmi-phy drwxr-xr-x 3 root root 0 Jan 1 1970 1020f000.rng drwxr-xr-x 4 root root 0 Jan 1 1970 11001000.adc drwxr-xr-x 4 root root 0 Jan 1 1970 11002000.serial drwxr-xr-x 4 root root 0 Jan 1 1970 11003000.serial drwxr-xr-x 4 root root 0 Jan 1 1970 11004000.serial drwxr-xr-x 4 root root 0 Jan 1 1970 11006000.pwm drwxr-xr-x 4 root root 0 Jan 1 1970 11007000.i2c drwxr-xr-x 4 root root 0 Jan 1 1970 11008000.i2c drwxr-xr-x 4 root root 0 Jan 1 1970 1100a000.spi drwxr-xr-x 3 root root 0 Jan 1 1970 1100b000.thermal drwxr-xr-x 3 root root 0 Jan 1 1970 1100c000.serial drwxr-xr-x 4 root root 0 Jan 1 1970 11013000.i2c drwxr-xr-x 4 root root 0 Jan 1 1970 11220000.clock-controller drwxr-xr-x 4 root root 0 Jan 1 1970 11230000.mmc drwxr-xr-x 4 root root 0 Jan 1 1970 11240000.mmc drwxr-xr-x 3 root root 0 Jan 1 1970 13000000.syscon drwxr-xr-x 4 root root 0 Jan 1 1970 13040000.gpu drwxr-xr-x 5 root root 0 Jan 1 1970 14000000.syscon drwxr-xr-x 3 root root 0 Jan 1 1970 14007000.ovl drwxr-xr-x 3 root root 0 Jan 1 1970 14008000.rdma drwxr-xr-x 3 root root 0 Jan 1 1970 14009000.wdma drwxr-xr-x 3 root root 0 Jan 1 1970 1400a000.pwm drwxr-xr-x 3 root root 0 Jan 1 1970 1400b000.color drwxr-xr-x 3 root root 0 Jan 1 1970 1400e000.mutex drwxr-xr-x 3 root root 0 Jan 1 1970 14010000.larb drwxr-xr-x 3 root root 0 Jan 1 1970 14012000.rdma drwxr-xr-x 3 root root 0 Jan 1 1970 14014000.dpi drwxr-xr-x 4 root root 0 Jan 1 1970 14015000.hdmi drwxr-xr-x 3 root root 0 Jan 1 1970 15000000.syscon drwxr-xr-x 3 root root 0 Jan 1 1970 15001000.larb drwxr-xr-x 3 root root 0 Jan 1 1970 15004000.jpegdec drwxr-xr-x 3 root root 0 Jan 1 1970 16000000.syscon drwxr-xr-x 3 root root 0 Jan 1 1970 16010000.larb drwxr-xr-x 3 root root 0 Jan 1 1970 1a000000.syscon drwxr-xr-x 3 root root 0 Jan 1 1970 1a140000.pcie drwxr-xr-x 3 root root 0 Jan 1 1970 1a149000.t-phy drwxr-xr-x 3 root root 0 Jan 1 1970 1a14a000.t-phy drwxr-xr-x 3 root root 0 Jan 1 1970 1a1c0000.usb drwxr-xr-x 3 root root 0 Jan 1 1970 1a1c4000.t-phy drwxr-xr-x 3 root root 0 Jan 1 1970 1a240000.usb drwxr-xr-x 3 root root 0 Jan 1 1970 1a244000.t-phy drwxr-xr-x 3 root root 0 Jan 1 1970 1b000000.syscon drwxr-xr-x 3 root root 0 Jan 1 1970 1b007000.dma-controller drwxr-xr-x 5 root root 0 Jan 1 1970 1b100000.ethernet drwxr-xr-x 3 root root 0 Jan 1 1970 1b240000.crypto drwxr-xr-x 3 root root 0 Jan 1 1970 1c000000.syscon drwxr-xr-x 4 root root 0 Jan 1 1970 Fixed MDIO bus.0 drwxr-xr-x 3 root root 0 Jan 1 1970 connector drwxr-xr-x 4 root root 0 Jan 1 1970 fixedregulator@0 drwxr-xr-x 3 root root 0 Jan 1 1970 gpio-keys drwxr-xr-x 4 root root 0 Jan 1 1970 leds drwxr-xr-x 3 root root 0 Jan 1 1970 mtk-cpufreq drwxr-xr-x 3 root root 0 Jan 1 1970 pmu drwxr-xr-x 2 root root 0 Jun 9 14:35 power drwxr-xr-x 4 root root 0 Jan 1 1970 reg-dummy drwxr-xr-x 4 root root 0 Jan 1 1970 regulator-1p8v drwxr-xr-x 4 root root 0 Jan 1 1970 regulator-3p3v drwxr-xr-x 4 root root 0 Jan 1 1970 regulator-5v drwxr-xr-x 3 root root 0 Jun 9 14:35 regulatory.0 drwxr-xr-x 4 root root 0 Jan 1 1970 serial8250 drwxr-xr-x 3 root root 0 Jan 1 1970 timer -rw-r--r-- 1 root root 4096 Jun 9 14:35 uevent
After tweaks:
root@llcon:/sys/devices# ls -ls platform/
0 drwxr-xr-x 3 root root 0 Jan 1 1970 10000000.syscon
0 drwxr-xr-x 3 root root 0 Jan 1 1970 10001000.syscon
0 drwxr-xr-x 3 root root 0 Jan 1 1970 10003000.syscon
0 drwxr-xr-x 3 root root 0 Jan 1 1970 10005000.syscfg
0 drwxr-xr-x 3 root root 0 Jan 1 1970 10006000.power-controller
0 drwxr-xr-x 5 root root 0 Jan 1 1970 10007000.watchdog
0 drwxr-xr-x 3 root root 0 Jan 1 1970 10008000.timer
0 drwxr-xr-x 5 root root 0 Jan 1 1970 1000b000.pinctrl
0 drwxr-xr-x 3 root root 0 Jan 1 1970 1000c000.smi
0 drwxr-xr-x 4 root root 0 Jan 1 1970 1000d000.pwrap
0 drwxr-xr-x 4 root root 0 Jan 1 1970 10010000.dsi-phy
0 drwxr-xr-x 3 root root 0 Jan 1 1970 10012000.cec
0 drwxr-xr-x 3 root root 0 Jan 1 1970 10013000.cir
0 drwxr-xr-x 4 root root 0 Jan 1 1970 10205000.mmsys_iommu
0 drwxr-xr-x 4 root root 0 Jan 1 1970 10206000.efuse
0 drwxr-xr-x 3 root root 0 Jan 1 1970 10209000.syscon
0 drwxr-xr-x 4 root root 0 Jan 1 1970 10209100.hdmi-phy
0 drwxr-xr-x 3 root root 0 Jan 1 1970 1020f000.rng
0 drwxr-xr-x 4 root root 0 Jan 1 1970 11001000.adc
0 drwxr-xr-x 4 root root 0 Jan 1 1970 11002000.serial
0 drwxr-xr-x 4 root root 0 Jan 1 1970 11003000.serial
0 drwxr-xr-x 4 root root 0 Jan 1 1970 11004000.serial
0 drwxr-xr-x 4 root root 0 Jan 1 1970 11006000.pwm
0 drwxr-xr-x 4 root root 0 Jan 1 1970 11007000.i2c
0 drwxr-xr-x 4 root root 0 Jan 1 1970 11008000.i2c
0 drwxr-xr-x 4 root root 0 Jan 1 1970 1100a000.spi
0 drwxr-xr-x 3 root root 0 Jan 1 1970 1100b000.thermal
0 drwxr-xr-x 3 root root 0 Jan 1 1970 1100c000.serial
0 drwxr-xr-x 4 root root 0 Jan 1 1970 11013000.i2c
0 drwxr-xr-x 3 root root 0 Jan 1 1970 11200000.usb
0 drwxr-xr-x 3 root root 0 Jan 1 1970 11210000.t-phy
0 drwxr-xr-x 4 root root 0 Jan 1 1970 11220000.clock-controller
0 drwxr-xr-x 4 root root 0 Jan 1 1970 11230000.mmc
0 drwxr-xr-x 4 root root 0 Jan 1 1970 11240000.mmc
0 drwxr-xr-x 3 root root 0 Jan 1 1970 13000000.syscon
0 drwxr-xr-x 4 root root 0 Jan 1 1970 13040000.gpu
0 drwxr-xr-x 5 root root 0 Jan 1 1970 14000000.syscon
0 drwxr-xr-x 3 root root 0 Jan 1 1970 14007000.ovl
0 drwxr-xr-x 3 root root 0 Jan 1 1970 14008000.rdma
0 drwxr-xr-x 3 root root 0 Jan 1 1970 14009000.wdma
0 drwxr-xr-x 3 root root 0 Jan 1 1970 1400a000.pwm
0 drwxr-xr-x 3 root root 0 Jan 1 1970 1400b000.color
0 drwxr-xr-x 3 root root 0 Jan 1 1970 1400e000.mutex
0 drwxr-xr-x 3 root root 0 Jan 1 1970 14010000.larb
0 drwxr-xr-x 3 root root 0 Jan 1 1970 14012000.rdma
0 drwxr-xr-x 3 root root 0 Jan 1 1970 14014000.dpi
0 drwxr-xr-x 4 root root 0 Jan 1 1970 14015000.hdmi
0 drwxr-xr-x 3 root root 0 Jan 1 1970 15000000.syscon
0 drwxr-xr-x 3 root root 0 Jan 1 1970 15001000.larb
0 drwxr-xr-x 3 root root 0 Jan 1 1970 15004000.jpegdec
0 drwxr-xr-x 3 root root 0 Jan 1 1970 16000000.syscon
0 drwxr-xr-x 3 root root 0 Jan 1 1970 16010000.larb
0 drwxr-xr-x 3 root root 0 Jan 1 1970 1a000000.syscon
0 drwxr-xr-x 3 root root 0 Jan 1 1970 1a140000.pcie
0 drwxr-xr-x 3 root root 0 Jan 1 1970 1a149000.t-phy
0 drwxr-xr-x 3 root root 0 Jan 1 1970 1a14a000.t-phy
0 drwxr-xr-x 3 root root 0 Jan 1 1970 1a1c0000.usb
0 drwxr-xr-x 3 root root 0 Jan 1 1970 1a1c4000.t-phy
0 drwxr-xr-x 3 root root 0 Jan 1 1970 1a240000.usb
0 drwxr-xr-x 3 root root 0 Jan 1 1970 1a244000.t-phy
0 drwxr-xr-x 3 root root 0 Jan 1 1970 1b000000.syscon
0 drwxr-xr-x 3 root root 0 Jan 1 1970 1b007000.dma-controller
0 drwxr-xr-x 5 root root 0 Jan 1 1970 1b100000.ethernet
0 drwxr-xr-x 3 root root 0 Jan 1 1970 1b240000.crypto
0 drwxr-xr-x 3 root root 0 Jan 1 1970 1c000000.syscon
0 drwxr-xr-x 4 root root 0 Jan 1 1970 Fixed MDIO bus.0
0 drwxr-xr-x 3 root root 0 Jan 1 1970 connector
0 drwxr-xr-x 4 root root 0 Jan 1 1970 fixedregulator@0
0 drwxr-xr-x 3 root root 0 Jan 1 1970 gpio-keys
0 drwxr-xr-x 4 root root 0 Jan 1 1970 leds
0 drwxr-xr-x 3 root root 0 Jan 1 1970 mtk-cpufreq
0 drwxr-xr-x 3 root root 0 Jan 1 1970 pmu
0 drwxr-xr-x 2 root root 0 Jun 15 15:16 power
0 drwxr-xr-x 4 root root 0 Jan 1 1970 reg-dummy
0 drwxr-xr-x 4 root root 0 Jan 1 1970 regulator-1p8v
0 drwxr-xr-x 4 root root 0 Jan 1 1970 regulator-3p3v
0 drwxr-xr-x 4 root root 0 Jan 1 1970 regulator-5v
0 drwxr-xr-x 3 root root 0 Jun 15 15:16 regulatory.0
0 drwxr-xr-x 4 root root 0 Jan 1 1970 serial8250
0 drwxr-xr-x 3 root root 0 Jan 1 1970 timer
0 -rw-r--r-- 1 root root 4096 Jun 15 15:16 uevent
Image
lth@ncpws04:/tmp$ dumpimage -l lifeline-0.0.63-dev-mediatek-mt7623-bananapi_bpi-r2-squashfs-sysupgrade.itb Image contains unit addresses @, this will break signing FIT description: ARM OpenWrt FIT (Flattened Image Tree) Created: Wed Jun 8 19:06:59 2022 Image 0 (kernel-1) Description: ARM OpenWrt Linux-5.15.34 Created: Wed Jun 8 19:06:59 2022 Type: Kernel Image Compression: gzip compressed Data Size: 5829231 Bytes = 5692.61 KiB = 5.56 MiB Architecture: ARM OS: Linux Load Address: 0x80008000 Entry Point: 0x80008000 Hash algo: crc32 Hash value: 1492c2b5 Hash algo: sha1 Hash value: d50bca802e8b35ebb6fa998c7e75e42543bc8e82 Image 1 (fdt-1) Description: ARM OpenWrt bananapi_bpi-r2 device tree blob Created: Wed Jun 8 19:06:59 2022 Type: Flat Device Tree Compression: uncompressed Data Size: 34375 Bytes = 33.57 KiB = 0.03 MiB Architecture: ARM Hash algo: crc32 Hash value: 0d29a71c Hash algo: sha1 Hash value: c43349727efd6bfc7c719db7ec2958a74e88121b Image 2 (rootfs-1) Description: ARM OpenWrt bananapi_bpi-r2 rootfs Created: Wed Jun 8 19:06:59 2022 Type: Filesystem Image Compression: uncompressed Data Size: 13963264 Bytes = 13636.00 KiB = 13.32 MiB Hash algo: crc32 Hash value: dd16523e Hash algo: sha1 Hash value: 8a4803fbf84f88ed7228b0ce69a451e1fd590b25 Default Configuration: 'config-1' Configuration 0 (config-1) Description: OpenWrt bananapi_bpi-r2 Kernel: kernel-1 FDT: fdt-1 Loadables: rootfs-1
Issue
/consys@18070000:power-domains: cell 0 is not a phandle reference arch/arm/boot/dts/mt7623.dtsi:759.26-777.4: Warning (power_domains_property): /consys@18070000: Missing property '#power-domain-cells' in node /pinctrl@10005000/spi1-default or bad phandle (referred from power-domains[0]) arch/arm/boot/dts/mt7623.dtsi:766.3-24: Warning (resets_property): /consys@18070000:resets: cell 0 is not a phandle reference arch/arm/boot/dts/mt7623.dtsi:759.26-777.4: Warning (resets_property): /consys@18070000: Missing property '#reset-cells' in node /t-phy@1a149000/pcie-phy@1a149900 or bad phandle (referred from resets[0]) arch/arm/boot/dts/mt7623.dtsi:610.25-53: Warning (gpios_property): /usb@11200000/connector:id-gpios: cell 0 is not a phandle reference DTC arch/arm/boot/dts/mt7623a-rfb-nand.dtb arch/arm/boot/dts/mt7623.dtsi:762.3-24: Warning (clocks_property): /consys@18070000:clocks: cell 0 is not a phandle reference arch/arm/boot/dts/mt7623.dtsi:764.3-31: Warning (power_domains_property): /consys@18070000:power-domains: cell 0 is not a phandle reference arch/arm/boot/dts/mt7623.dtsi:759.26-777.4: Warning (power_domains_property): /consys@18070000: Missing property '#power-domain-cells' in node /pinctrl@10005000/nanddefault or bad phandle (referred from power-domains[0]) arch/arm/boot/dts/mt7623.dtsi:766.3-24: Warning (resets_property): /consys@18070000:resets: cell 0 is not a phandle reference arch/arm/boot/dts/mt7623.dtsi:759.26-777.4: Warning (resets_property): /consys@18070000: Missing property '#reset-cells' in node /t-phy@1a244000/usb-phy@1a244900 or bad phandle (referred from resets[0]) arch/arm/boot/dts/mt7623.dtsi:610.25-53: Warning (gpios_property): /usb@11200000/connector:id-gpios: cell 0 is not a phandle reference DTC arch/arm/boot/dts/mt7623n-rfb-emmc.dtb arch/arm/boot/dts/mt7623.dtsi:762.3-24: Warning (clocks_property): /consys@18070000:clocks: cell 0 is not a phandle reference arch/arm/boot/dts/mt7623.dtsi:764.3-31: Warning (power_domains_property): /consys@18070000:power-domains: cell 0 is not a phandle reference arch/arm/boot/dts/mt7623.dtsi:759.26-777.4: Warning (power_domains_property): /consys@18070000: Missing property '#power-domain-cells' in node /efuse@10206000/calib@424 or bad phandle (referred from power-domains[0]) arch/arm/boot/dts/mt7623.dtsi:766.3-24: Warning (resets_property): /consys@18070000:resets: cell 0 is not a phandle reference arch/arm/boot/dts/mt7623.dtsi:759.26-777.4: Warning (resets_property): /consys@18070000: Missing property '#reset-cells' in node /regulator-1p8v or bad phandle (referred from resets[0]) arch/arm/boot/dts/mt7623.dtsi:610.25-53: Warning (gpios_property): /usb@11200000/connector:id-gpios: cell 0 is not a phandle reference DTC arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dtb arch/arm/boot/dts/mt7623.dtsi:762.3-24: Warning (clocks_property): /consys@18070000:clocks: cell 0 is not a phandle reference arch/arm/boot/dts/mt7623.dtsi:764.3-31: Warning (power_domains_property): /consys@18070000:power-domains: cell 0 is not a phandle reference arch/arm/boot/dts/mt7623.dtsi:766.3-24: Warning (resets_property): /consys@18070000:resets: cell 0 is not a phandle reference arch/arm/boot/dts/mt7623.dtsi:610.25-53: Warning (gpios_property): /usb@11200000/connector:id-gpios: cell 0 is not a phandle reference DTC arch/arm/boot/dts/mt7629-rfb.dtb DTC arch/arm/boot/dts/mt8127-moose.dtb DTC arch/arm/boot/dts/mt8135-evbp1.dtb LDS arch/arm/boot/compressed/vmlinux.lds AS arch/arm/boot/compressed/head.o